HC-SR04 Ultrasonic Sensor Distance Measuring Module
  • HC-SR04 Ultrasonic Sensor Distance Measuring Module

HC-SR04 Ultrasonic Sensor Distance Measuring Module

S0007

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle.
HC-SR04 Ultrasonic Sensor Distance Measuring Module features:
- Supply voltage: 5V (4.5V- 6V)
- Consumption: 30 mA typical, (35 mA max)
- Interface: VCC , GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED indicator of measurement in progress
- Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm
- Quantity: 1 unit
Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry:
Automatic robot operation with obstacle detection />

OEM
5905323233980
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

HC-SR04 Ultrasonic Sensor Distance Measuring Module description

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle.

HC-SR04 Ultrasonic Sensor Distance Measuring Module features:

- Supply voltage: 5V (4.5V- 6V)
- Consumption: 30 mA typical, (35 mA max)
- Interface: VCC , GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED indicator of measurement in progress
- Frequency: 40 kHz for 200 µs
- Size: 30mm x 20mm
- Quantity: 1 unit

Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry:

Automatic robot operation with obstacle detection / Measure the distance to an obstacle with the HC-sensor SR04

- C wiring the HC-SR04 ultrasonic sensor with the UNO module

Customers who bought this product also bought

Printed Circuit Board Terminal 2 poles 5mm pitch

Printed Circuit Board Terminal 2 poles 5mm pitch features:
Number of contacts: 2
Step: 5mm
Number of rows: 1
Mounting Type: PCB
Gender: Male
Allowable Section: 1.5mm2 (22-14 AWG)
Termination Method: Screw
Type: Screw Terminal Block Nominal current: 16A
Nominal voltage: 250V
Color: gray
Material: Nylon 66
Depth: 10mm
Width: 7.5mm
Length: 10mm

K0171

Price €0.24

Resettable fuse PTC 650mA 90V DC

The PTC polymer fuse is a reusable element protecting the circuit against overload and short circuit. Resettable fuse PTC 650mA 90V DC features:
Operation current: 650mA Maximum Voltage: 90V  Temperature range: -40 „ƒ to 85 „ƒ Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirement 40A shock current
Trip current 1.3A
880mW power
Min resistance 310mΩ Max. 720mΩ
Dimensions A.97mm
B 14.5mm
C  5.1mm
D 7.6mm
E 3.1mm
F 1.1mm
Terminal dimensions Ø0.51x7.6mm        datasheet Resettable fuse  

D0084

Price €0.90

Universal Battery Tester AA AAA 1.5V 9V

Universal Battery Tester AA AAA 1.5V 9V features:
- Type: Household battery tester
- You accept:
* Button batteries
* 1.5 V: AAA, HP16, MN2400, AA R03, HP7, MN1500, UM3 C, HP11, MN1400, SP11, LR14, UM2 D, HP2, MN1300, SP2, R20
* 9 V: PP3, 6F22, MN1604, 006P
* Dimensions: 5.5 x 5.2 cm

M0064

Price €2.99

Load Cell Weight Sensor 2kg

Load cell Load Cell Weight Sensor 2kg features:
- Load cell to measure weight up to 2kg
- The transducer measures the deformation of the metal structure and converts it into a few mV
- Load range: 2kg
- Operating voltage: 3VDC ~ 14 VDC
- Nominal output: 1.0 ± 0.15mV / V
- Repeatability: 0.03% FS
- Effect of the temperature at the outlet: 0.01% F.S / °C
- Effect of temperature on zero: 0.05% F.S / °C
- Zero: ± 0.1000 mV / V
- Input impedance: 1115 + -10% Ω
- Output impedance: 1000 + - 10% Ω
- Insulation resistance:> = 1000 MΩ
- Safe Overload Rate: 150% FS
- Final overload rate: 200% FS
- Temperature range: -20 - 60 °C
- Material: Aluminum alloy
- Degree of protection: IP65

M0125

Regular price €2.99 -€0.99 Price €2.00

Ramps 1.4 Reprap - Arduino Mega Pololu Shield

RepRap Arduino Mega Pololu Shield (RAMPS) version 1.4 for 3D printer. RAMPS is a shield for the Arduino Mega - The outputs of the Arduino board are redirected to the motor drivers. To have the complete electronics for a 3D printer you need a RAMPS, an Arduino Mega and at least four stepper motor drivers

I0019

Price €4.95

Related articles on blog

No related article on blog

€1.79

1,48 tax excl.

Tax included 1
30+ items
Price €1.79

Order until 4pm we will send today
30 days return