Water Flow Sensor 1-30l /Min YF-S201
  • Water Flow Sensor 1-30l /Min YF-S201
  • Water Flow Sensor 1-30l /Min YF-S201
  • Water Flow Sensor 1-30l /Min YF-S201

Water Flow Sensor 1-30l /Min YF-S201

M0109

The meter built on the basis of a water rotor and a Hall effect sensor
Please note this is not a Accuracy. Pulse rate varies slightly depending on flow rate, fluid pressure, and sensor orientation. Water Flow Sensor 1-30l /Min YF-S201 features:
- Working voltage range: DC 5 ~ 18 V
- Allow pressure: water pressure below 1.75Mpa
- Accuracy (flow-pulse output): ± 1 ~ 30 l / min
- Use temperature: ‰ ¤ 80 ° C
- Load capacity: ‰ ¤ 10 mA (5Vdc)
- Operating humidity: 35% ~ 90% RH (frost free)
- Temperature: -25 ~ + 80 ° C
- Outlet diameter: 1/2 "
- Red wire: positive supply
- Wire Black: negative power supply
- Yellow Cable: signal output
- Color: black
- Size: 6.2x3.6x3.4 cm

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Water Flow Sensor 1-30l /Min YF-S201 description

The meter built on the basis of a water rotor and a Hall effect sensor
Please note this is not a Accuracy.

Pulse rate varies slightly depending on flow rate, fluid pressure, and sensor orientation.

Water Flow Sensor 1-30l /Min YF-S201 features:


< / h2>

- Working voltage range: DC 5 ~ 18 V
- Allow pressure: water pressure below 1.75Mpa
- Accuracy (flow-pulse output): ± 1 ~ 30 l / min
- Use temperature: ‰ ¤ 80 ° C
- Load capacity: ‰ ¤ 10 mA (5Vdc)
- Operating humidity: 35% ~ 90% RH (frost free)
- Temperature: -25 ~ + 80 ° C
- Outlet diameter: 1/2 "
- Red wire: positive supply
- Wire Black: negative power supply
- Yellow Cable: signal output
- Color: black
- Size: 6.2x3.6x3.4 cm
- Cable length: 15 cm p>

Customers who bought this product also bought

Arduino compatible Nano V3.0 CH340 board

Version compatible with Arduino Nano V3.0
It has an ATMega328P chip running at 16Mhz with bootloader loaded factory.
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per I / O pin 40 mA
- Flash memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Frequency Clock: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

B0006

Price €7.40

16x2 LCD screen 1602 Blue welded pins

It consists of a 16-character, 2-row display
The display is compatible with the HD44780 controller
Ideal for projects with Arduino
You can use it with PIC, AVR, STM32
16x2 LCD screen 1602 Blue welded pins features:

- LCD screen, 16 characters and 2 lines
- 5V power supply
- HD44780 compatible controller
- Backlit blue background, white letters
- Includes an adjustable contrast pin - It has soldered pins and is ready to connect - Dimensions (mm): 80 x 36 x 19

P0154

Price €3.26

DHT22/AM2302 Temperature Sensor Humidity PCB + Digital Cable for Arduino

- The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement - This sensor, unlike DHT11, is capable of measuring negative temperature values ​​and measures tenths of a degree
Characteristic:
- Operating voltage: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy
- Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy
- Maximum sampling rate: 2 seconds
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
Write texts on the OLED 0.96 '' screen
- Read the measurements of the temperature / humidity sensor DHT22 / AM2302 on a 0.96 '' OLED screen
Send />

M0099

Regular price €5.36 -€2.00 Price €3.36

Arduino Nano

Arduino Nano A000005 is the smaller, friendlier version of Uno's badge. Perfect for IoT applications and for mobile device prototypes. This board is based on the ATmega328 and has a wide range of applications, thanks to its small size and flexibility.

BAR05

Price €20.98

Micro USB Interface Power Supply DC 7-12 VDC

This module is a 2-channel DC 7-12 VDC power supply for MB102 breadboards.
Each channel has its switch for configure the output voltage to 3.3V or 5V.
Its 3x2 male connectors allow it to be connected to the breadboard in a very simple way without soldering. Micro USB Interface Power Supply DC 7-12 VDC features:
- Operating voltage: DC 7-12 V
- Power display LED
- 1 Jack Female connector 2.1 mm to supply
- 1 AMS1117 3.3V regulator
- 1 AMS1117 5V regulator
- 4 3x2 connectors
- 1 5V micro USB female outlet
- Size: 5.5x3.5x1.5 cm

A0078

Regular price €7.85 -€4.00 Price €3.85
€4.92

4,92 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €4.92

Order until 4pm we will send today
30 days return