Positive Voltage Regulator TS117B 3.3V 1Amp Low Dropout
  • Positive Voltage Regulator TS117B 3.3V 1Amp Low Dropout
  • Positive Voltage Regulator TS117B 3.3V 1Amp Low Dropout

Positive Voltage Regulator TS117B 3.3V 1Amp Low Dropout

T0067

Positive Voltage Regulator TS117B 3.3V 1Amp Low Dropout features:
- Blister: SOT-223
- Number of pins: 3
- Step between pins: 2.29 mm
- Manufacturer: from China
- VDD power supply voltage: 12V
- Adjustable output voltage V (OUT): 1.8 - 3.3 V
- Line regulation: 0.2% - 0.5%
- Load regulation: 0.05% - 1.0%
- Fall voltage: 1.3 - 1.5 V
- Limiting current I (CL): 1.5 A
- Adjustment of current change: 90 μA
- Minimum load current: 10 mA
- Current in inactive state: 5 - 10 mA
- Wave rejection: 60 - 70 dB
- Thermal regulation: 0.004 - 0.02% / W
- Temperature stability: 0.5%
- Long-term stability: 0.03 - 1.0%
- Average quadratic output noise: 0.003%
- Thermal resistance, connection to the case: 15 ° C /

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Positive Voltage Regulator TS117B 3.3V 1Amp Low Dropout features:


- Blister: SOT-223
- Number of pins: 3
- Step between pins: 2.29 mm
- Manufacturer: from China
- VDD power supply voltage: 12V
- Adjustable output voltage V (OUT): 1.8 - 3.3 V
- Line regulation: 0.2% - 0.5%
- Load regulation: 0.05% - 1.0%
- Fall voltage: 1.3 - 1.5 V
- Limiting current I (CL): 1.5 A
- Adjustment of current change: 90 μA
- Minimum load current: 10 mA
- Current in inactive state: 5 - 10 mA
- Wave rejection: 60 - 70 dB
- Thermal regulation: 0.004 - 0.02% / W
- Temperature stability: 0.5%
- Long-term stability: 0.03 - 1.0%
- Average quadratic output noise: 0.003%
- Thermal resistance, connection to the case: 15 ° C / W
- Thermal shutdown: 130 ° C
- Hysteresis of thermal shutdown: 10 ° C
- Operating temperature: 0 ° C to + 125 ° C
- Storage temperature: -65 ° C to + 150 ° C

Data sheet

Voltaje de entrada
1,5 A
Voltaje de salida
Fijo
Empaquetado
SOT223

Customers who bought this product also bought

Metal Switch 16mm Stainless Steel

Latching Metal Switch 16mm Stainless Steel features:
- For panel N/A NO 2A 36V Stainless Steel On/Off
- Type of operation: On/Off
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A/36VDC
- Type of terminal: Screw
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C

K0095

Price €3.69

W1209 12V DC Thermostat Digital Temperature Controller Switch

W1209 12V DC Thermostat Digital Temperature Controller Switch features:
- Model: W1209
- Supply voltage: DC 12V
- Temperature control mode: ON / OFF
- Temperature range: -50 -110 ° C
- Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C
- Measurement accuracy: 0.1 ° C
- Refresh rate: 0.5 s
- Temperature protection 0-110 ° C
- Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA
- Power of output: 10A relay
- Sensor probe: NTC waterproof sensor (10K 0.5%)
- Environmental requirements: -10 ~ 60 ° C Humidity 20% -85%
- Dimensions: 48 x 40 mm

M0102

Price €3.79

ESP-12F ESP8266 12F WiFi Board Module

- WIFI module based on the ESP8266 controller
- ESP8266-12F is an improved version of ESP8266-12E
- It works as a standard WiFi 802.11 b / g / n 2.4 GHz. It is equipped with 22 outputs (pitch 2 mm) of which 11 are GPIO, ADC 1 and SPI. A LED and a PCB antenna have been incorporated
ESP-12F ESP8266 12F WiFi Board Module features:
- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP Stack.
- PLL, regulators and integrated energy management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low energy mode: <10 uA
- Integrated 32-bit processor

W0064

Price €3.09

Ultrasound Distance Sensor HC-SR05

Ultrasonic sensors overcome many of the weaknesses of IR sensors by providing distance measurement regardless of the color and illumination of obstacles. Ultrasound Distance Sensor HC-SR05 features:
- Power supply: 4.5-5.5 VDC
- Supply current: 10 to 40 mA
- Activation pin format: 10 μs digital pulse
- Echo Pin Output: 0-Vcc
- Echo Pin Format: the output is DIGITAL and directly proportional with range. See our conversion formula below
- Measurement range: 2cm to ~ 4.5m
- Measurement resolution: 0.3cm
- Measurement angle: up to 15 degrees
- Measurement speed: 40 Hz,
- Connector: standard 5-pin male connector that can be connected directly to boards or breadboards:
- 1: VCC
- 2: Trig
- 3: Echo

S0047

Price €1.95

Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development

Mini ESP8266 ESP12E CH340 WiFi Development
NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu it is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development features:

- Compatible with Arduino, programming with the Arduino IDE
- Power supply voltage: 5V
- LOGICAL LEVELS: 3.3V
- 11 input / output pins
- 1 ADC (input: 0-3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz - Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and power management units Integrated

W0061

Price €3.49

Potentiometer Cleaner - Spray 60ml

Potentiometer Cleaner - Spray 60ml features:
A special preparation for potentiometers, perfectly suited to remove any dirt deposited during the operation of the device, contains a special grease to reduce friction. It cleans waste contacts, also regenerates them.

Q0030

Price €2.95

Desoldering Wire 2.5mm

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 2.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 2.5mm

H0007

Price €1.79

UNO Board CH340 clone

- It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields
Characteristic:
- ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: USB female Type B

B0011

Price €7.49
€1.10

0,91 tax excl.

Tax included 1
Last 4 items
Price €1.10

Order until 4pm we will send today
30 days return