TS1117BCW-5.0 Positive Voltage Regulator 5V 1Amp Low Dropout
  • TS1117BCW-5.0 Positive Voltage Regulator 5V 1Amp Low Dropout
  • TS1117BCW-5.0 Positive Voltage Regulator 5V 1Amp Low Dropout

TS1117BCW-5.0 Positive Voltage Regulator 5V 1Amp Low Dropout

T0066

Positive Voltage Regulator TS1117BCW-5.0 5V 1Amp Low Dropout 

Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Positive Voltage Regulator TS1117BCW-5.0 5V 1Amp Low Dropout features:


- Blister: SOT-223
- Number of pins: 3
- Step between pins: 2.29 mm
- Manufacturer: from China
- VDD power supply voltage: 12V
- Adjustable output voltage V (OUT): 1.8 - 5 V
- Line regulation: 0.005% - 0.2%
- Load regulation: 0.05% - 0.5%
- Fall voltage: 1.1 - 1.2 V
- Limiting current: 1.5 A
- Adjustment of current change: 0.2 - 5 μA
- Minimum load current: 10 mA
- Current in inactive state: 4 - 13 mA
- Wave rejection: 60 - 70 dB
- Thermal regulation: 0.004 - 0.02% / W
- Temperature stability: 0.5%
- Long-term stability: 0.03 - 1.0%
- Average quadratic output noise: 0.003%
- Thermal resistance, connection to the case: 15 ° C / W
- Thermal shutdown: 155 ° C
- Hysteresis of thermal shutdown: 10 ° C
- Operating temperature: 0 ° C to + 125 ° C
- Storage temperature: -65 ° C to + 150 ° C

Data sheet

Voltaje de entrada
1,5 A
Voltaje de salida
Fijo
Empaquetado
SOT223

Customers who bought this product also bought

ADXL345 3-Axis Accelerometer SPI and I2C

Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
It serves to measure the static acceleration, for example gravity, in applications where you need to measure the inclination.
Also to measure dynamic acceleration, movement. ADXL345 3-Axis Accelerometer SPI and I2C features:
- Type: 3-axis accelerometer
- Chip: ADXL345
- Supply voltage: 3-5V
- Consumption: 40uA active and 0.1uA on hold
- Communication: SPI and I2C
- Measurements: Static and dynamic acceleration
- Accelerometer scales ± 2g, ± 4g, ± 8g and ± 16g
- Resolution: 13 bits
- Dimensions: 20x16mm
- Operating temperature: -40 °C to +80 °C
- Detection: Free fall, click-double click

M0018

Price €3.09

LCD TFT Display Module 128x160 1.8 SPI

1.8 TFT LCD screen with SPI interface and 5 control signals. Its touch screen is resistive, it has a resolution of 128x160 pixels.
Easily programmable with UNO module, Arduino, Raspberry, Mega2560.
LCD TFT Display Module 128x160 1.8 SPI features:
- TFT LCD screen 1.8 128x160 pixels
- Pixel: RGB vertical stripe
- Driver ILI9163,
- SPI interface: CS / MOSI / MISO / SCK (pins not soldered)
- 5-pin interface CS, RS, SCL, SDA, RST for control
- Resistive touch screen
- Ideal for projects with ARDUINO, Uno R3, MEGA2560

P0135

Price €8.95

2x CNY70 Reflective Optical Sensor with Transistor Output

2x CNY70 Reflective Optical Sensor with Transistor Output features:
- Reflective optical sensor with transistor output
- Reflective optical coupler used to distinguish edge or line detection
- Dimensions of the housing are 7 x 7 x 6 mm
- Supply voltage: 5V
- Maximum diode current: 50 mA
- Maximum collector-emitter voltage: 32V
- Maximum collector current of 50 mA
- Quantity: 2 units

S0121

Price €0.74

UNO Board CH340 clone

- It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields
Characteristic:
- ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: USB female Type B

B0011

Price €7.49

Black UV sensor module UVM-30 for Arduino

UVM-30A sensor module suitable for any location and requires stable and precise measurement of UV light.
Ideal for Arduino projects.
Black UV sensor module UVM-30 for Arduino features:
- Operating voltage: 3-5 VDC,
- Voltage input: DC 0-1 VDC,
- 3-pin connector:
- GND (-): ground connection,
- Out: sensor output signal,
- VCC (+): sensor supply,
- Measurement accuracy: +/- 1UV index,
- Working current: 0.06mA (standard) / 0.1mA (max.),
- Response wavelength: 200-370 nm,
- Working temperature: -20ºC - + 85ºC,
- PCB size: 28x12mm.

M0178

Price €9.95

DHT11 Module Temperature and Humidity Sensor

The DHT11 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement.
Characteristic:
- Operating voltage: 3 to 5 VDC - Humidity measurement range: 20-95% ± 5% accuracy
- Temperature measurement range: 0ºC to 50ºC ± 2º accuracy
- Maximum sampling rate: 2 seconds - Working current 2.5mA
- 1-wire interface
- Dimensions: 32 x14 mm
- Quantity: 1 unit with 3x female / female cables

S0001

Price €2.99
€1.10

0,91 tax excl.

Tax included 1
30+ items
Price €1.10

Order until 4pm we will send today
30 days return