Nano plate V3.0 CH340 + Arduino compatible pins It has an ATMega328P chip running at 16Mhz with a factory loaded bootloader Characteristic: - Microcontroller: ATmega328 - Operating Voltage (logic level): 5V - Input Voltage (recommended): 7-12V - Digital I / O Pins: 14 (6 PWM outputs) - Analog Inputs: 8 (A0-A7) - DC Current per Pin I / O 40 mA - Flash Memory: 32 KB (2 KB used by the bootloader) - SRAM: 2 KB - EEPROM: 1 KB - Clock Frequency: 16 MHz - USB Communication - CH340 - Dimensions: 18 mm x 44 mm Code B0026 Available Price €9.99
Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features: - Shield module for Raspberry Pi 2 and Pi 3, B and B + Code RA013 Available Price €6.85
Flange Bearing F608zz for RepRap Prusa 3D Printer - Measurements: Inner diameter d: 8mm Outside diameter D: 22mm Width - dimension B: 7mm - Dimension C1: 1,5mm - Dimension D1: 25mm - Quantity: 1 unit Code I0107 Available Price €0.95
M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer features: - This sensor can be configured as auto Z axis level - Sensor detection switch inductive proximity LJ12A3-4-Z / BY - PNP DC6-36V - Often used for 3D printer bed leveling - Typical application: printer bed level sensor 3D - Cylindrical cable type DC 3 cable type (black, brown, blue) - Inductive sensor type - PNP NO (Normal Open) - Detecting Distance 4mm - DC supply voltage 6-36V - Current output 300mA - Response frequency 0.5KHz - Detects iron / aluminum - Operating temperature -25 ° C at + 55 ° C (Non-freezing condition) - Head diameter 12 mm - Size 6.2 x 2cm - Cable length 100cm Code S0036 Available Regular price €3.99 -€0.50 Price €3.49
Fan 12V 2x Cables 3D Reprap Printer Fan 12V 2x Cables 3D Reprap Printer features: - For Prusa RepRap 3D Printer - Voltage: 12V - Consumption: 90mA - Speed: 7000rpm ± 10% - Noise level: 25dB ± 10% - Screw diameter: 3.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 28cm - Dimensions: 30mm x 30mm x 10mm Code I0045 Available Price €1.59
Lot of 100unds White Nylon Clamps Lot of 100unds White Nylon Clamps features: - Plastic flange, polyamide 100x2.5mm plastic flanges - quantity: 100units Code K0259 Available Price €1.79
PVC Cable set - 10 Colours - 60m - multiple stranded wires. Set of multicoloured PVC cables useful for projects. The kit has 10 colours and a total length of 60m. Conductor according to AWG24 standard, tinned copper. Single stranded cable in the form of multiple stranded wires. Code VE020 Backorder Price €13.89
16GB Class 10 MicroSD memory card with adapter 16GB Class 10 MicroSD memory card with adapter features: - Capacity 16GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0019 Backorder Price €4.95
Monostable push button 3A 250V AC / 5A 30V DC, Illuminated 230V Momentary push button, illuminated, round AC 250V 3A / 5A 30V DC 5-pin. Light source: LED. Backlight supply voltage 230V. Push button screwed to housing, panel mounting. Code K0404 Available Price €2.95
Push button 6x6x4mm Push button 6x6x4mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x4.3mm Code K0079 Available Price €0.21
DIP Switch - DS-01 Horizontal High Profile 1 Position The DIP switch type THT (1 row 2 Pins) with a pitch of 2.54mm / 0.1 ". It works with the current of 50mA DC 12V. Code K0261 Available Price €0.35
Momentary Switch Push Button Black N/O 7mm Momentary Switch Push Button Black N/O 7mm features: - Momentary pushbutton N/O (normally open)- Black button- Dimensions approx. 7 mm x 27 mm- Recessed with nut and washer- Load current (supported): 1A to 230V / 2A to 125V- Drill to embed: 7 mm +/- 0.2- Operating temperature: -55ºC to + 85ºC Code K0157 Available Price €0.45
Momentary Switch Push Button Red N/O 7mm Momentary Switch Push Button Red N/O 7mm features: - Momentary pushbutton N/O (normally open)- Red button- Dimensions approx. 7 mm x 27 mm- Recessed with nut and washer- Load current (supported): 1A to 230V / 2A to 125V- Drill to embed: 7 mm +/- 0.2- Operating temperature: -55º to +85ºC Code K0156 Available Price €0.45
DIP Switch - DS-05 Horizontal High Profile 5 Positions The DIP switch type THT (5 rows 10 Pins) with a pitch of 2.54mm / 0.1 ". It works with the current of 50mA DC 12V. Code K0265 Available Price €0.99
10x Tactile Tact Push Button Switch 6x6x8mm 10x Tactile Tact Push Button Switch 6x6x8mm features:- Tactile Push Tact Switch mini electronic Arduino pushbutton- Measures: 6x6x8mm- Quantity: 10 units Code K0076 Available Price €0.15
12V Momentary LED Pushbutton Green 16mm N/A NO 12V Momentary LED Pushbutton Green 16mm N/A NO features:- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Green Code K0190 Available Price €5.89
Momentary Push button Switch N/A NO 2A 36V 16mm Stainless Steel Momentary Pushbutton Switch N/A NO 2A 36V 16mm Stainless Steel features: - Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 36VDC- Type of terminal: Screw- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0094 Available Price €4.49
DIP Switch - DS-03 Horizontal High Profile 3 Positions The DIP switch type THT (3 rows 6 Pins) with a pitch of 2.54mm / 0.1 ". It works with the current of 50mA DC 12V. Code K0263 Available Price €0.59
Switch On/On 3-pin 6A SPDT This switch can be used for development projects and for the industry. All metal parts are not oxidized, the insulation material is of high quality.Its pins protected by an anti oxidant makes welding much easier. Switch On/On 3-pin 6A SPDT features: - Type: Latch SPDT- Material: Plastic, metal- Maximum operating current and voltage: 3A / 250V, 6A / 125V- Number of pins: 3- Pin size: 4.5x2 mm- Type of current: AC/DC- Pins to be welded- Switch action: 2 positions On/On- Size: 13.2x12.7x33.3mm Code K0420 Available Price €0.49
DIP Switch - DS-05 Horizontal High Profile 5 Positions The DIP switch type THT (5 rows 10 Pins) with a pitch of 2.54mm / 0.1 ". It works with the current of 50mA DC 12V. Code K0265 Available Price €0.99
Vertical Slide Switch 3P2T 50V 0.5A 6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.It is also a great component for DIY. Vertical Slide Switch 3P2T 50V 0.5A features: - Type: 3P2T- Contact resistance: 30 MΩ max.- Insulation resistance: 100 MΩ- Maximum operating voltage: 50V- Maximum operating current: 0.5A- Can support 500 VAC for 1 minute- Step between pins: 2.54mm / 0.1 "- Pin size: 4.5x0.5x15 / 0.77 "x0.19"- Type of current: DC- Pins to be welded- Switch action: 2 ON / OFF positions- Shape of interrupter: rectangular- Size: 16x6.5x15 / 0.2 "x0.02" Code K0188 Available Price €0.48
Switch On/On 6-pin 6A SPDT This switch can be used for development projects and for the industry. All metal parts are not oxidized, the insulation material is of high quality.Its pins protected by an anti oxidant makes welding much easier. Switch On/On 6-pin 6A SPDT features: - Type: Latch SPDT- Material: Plastic, metal- Maximum operating current and voltage: 3A / 250V, 6A / 125V- Number of pins: 6- Pin size: 4.5x2 mm- Type of current: AC- Pins to be welded- Switch action: 2 positions On/On- Size: 13.2x12.7x33.3mm Code K0152 Available Price €0.45
12V Momentary LED Push Button Switch White 16mm N/A NO 12V Momentary LED Push Button Switch White 16mm N/A NO features: - Type of operation: Momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C+ Code K0098 Available Price €5.89
12V Momentary LED Pushbutton Green 16mm N/A NO 12V Momentary LED Pushbutton Green 16mm N/A NO features:- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Green Code K0190 Available Price €5.89
Momentary Switch Push Button Red N/O 7mm Momentary Switch Push Button Red N/O 7mm features: - Momentary pushbutton N/O (normally open)- Red button- Dimensions approx. 7 mm x 27 mm- Recessed with nut and washer- Load current (supported): 1A to 230V / 2A to 125V- Drill to embed: 7 mm +/- 0.2- Operating temperature: -55º to +85ºC Code K0156 Available Price €0.45
Rocker Switch KCD11 250V/3A On/Off SPST Rocker Switch 3A 250V On/Off SPST features: - AC 250V 3A 2 Pin ON/OFF I/O SPST Snap in mini oscillating switch- Rocker switch; Type: On/Off (SPST)- Control on and off SPST and 2 terminals- Voltage and Current: AC250V, 3A- Overall size: ~ 1.5 x 1 x 1.7 cm/0.6"x 0.4" x 0.7 "(L*W*H)- Mounting hole size: 1.35 x 0.8 cm/0.53"x 0.315" (L*W)- Black Code K0092 Available Price €0.95
DIP Switch - DS-04 Horizontal High Profile 4 Positions The DIP switch type THT (4 rows 8 Pins) with a pitch of 2.54mm / 0.1 ". It works with the current of 50mA DC 12V. Code K0264 Available Price €0.79