5x Power LED Aluminum Heat Sink 1W 3W 5x Power LED Aluminum Heat Sink 1W 3W features: - Outside diameter: 36mm- Height: 15mm- Quantity: 5 units Code P0037 Available Price €1.48
Battery holder 2x AA Battery holder with switch Includes a switch to output the voltage built into the case itself. It has a cover to protect the batteries. The cover has perforation in case you want to secure it with a screw (not included). Battery holder 2x AA Battery holder with switch features: - Cable 15cm long - Measurements 68x 32x 18mm - Battery length max 50mm - Compatible batteries (LR06, R06, MN1500, AM3, UM3 , HP7) Code PP005 Available Price €1.39
Aluminum Heatsink with Adhesive LM2596 XL4015 Aluminum Heatsink with Adhesive LM2596 XL4015 features: - Ideal for LM2596, XL4015, etc...- Dimensions: 11x11x5.5mm Code A0025 Available Price €0.59
12 V supply module with 2A step-up output on/off DM13 Overhead power supply module with fixed 12 VDC output accepting a maximum current of 2A. Works with frequency signals up to 1.2 MHz. Characteristic: - Input voltage range: 2 - 12 VDC, - Fixed output voltage: 12 VDC, - Output accuracy: ± 0.1 V, - Maximum output current: 2A, - Ripple at full load: Vpp & lt; 70mV, - Operating temperatures: -40ºC - + 85ºC, - PCB size: 17x13mm. Code A0093 Available Price €3.90
3S BMS 25A 12.6V 18650 PCM PCB Circuit Charging Module. In the case of a battery pack, the BMS (Battery Management System) balancing protection circuit allows charging and discharging to be individually controlled. That is, the circuit controls that all cells are charged and discharged at approximately the same voltage. The current during charging should be limited, because the cell will "absorb" the current given to it, but a higher current than the one established by the manufacturer (generally a safe current is 1C ) can cause the cell to overheat and, in extreme cases, explode. The same relationship also applies to discharge. Code A0106 Available Price €4.49
12V On/Off LED Pushbutton Blue 16mm N/A NO Characteristic:- For panel N / A NO 2A 36V Stainless Steel on / off- Type of operation: On / Off- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Blue Code K0192 Available Price €5.89
Thermally Conductive Silicone Paste H 100g Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors. Code Q0038 Last items in stock Price €5.49
DC 0-1A Analog Ammeter 91C16 class 5 Ammeter 0-1 A (DC) with needle model 91C16 transparent with integrated shunt. DC 0-1A Analog Ammeter 91C16 class 5 features: - Model: 91C16- Scale range: 0-1A (DC)- Accuracy: class 5- Transparent color- External size: 4 x 4 x 1.1cm- Panel size: 3.4 x 1.8 x 0.4cm- Integrated shunt Code H0154 Available Regular price €2.59 -€1.00 Price €1.59
12V Momentary LED Pushbutton Green 16mm N/A NO 12V Momentary LED Pushbutton Green 16mm N/A NO features:- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Green Code K0190 Available Price €5.89
10x Tactile Tact Push Button Switch 6x6x8mm 10x Tactile Tact Push Button Switch 6x6x8mm features:- Tactile Push Tact Switch mini electronic Arduino pushbutton- Measures: 6x6x8mm- Quantity: 10 units Code K0076 Available Price €0.15
12V Push Button LED Green 16mm 12V Push Button LED Green 16mm features:- Momentaneo panel N/A NO with return 2A Steel- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0097 Available Price €5.89
12V Momentary LED Push button Red 16mm N/A NO 12V Momentary LED Pushbutton Red 16mm N/A NO features:- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Red Code K0191 Available Price €5.89
Monostable push button 3A 250V AC / 5A 30V DC, Illuminated 230V Momentary push button, illuminated, round AC 250V 3A / 5A 30V DC 5-pin. Light source: LED. Backlight supply voltage 230V. Push button screwed to housing, panel mounting. Code K0404 Available Price €2.95
Vertical Slide Switch 3P2T 50V 0.5A 6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.It is also a great component for DIY. Vertical Slide Switch 3P2T 50V 0.5A features: - Type: 3P2T- Contact resistance: 30 MΩ max.- Insulation resistance: 100 MΩ- Maximum operating voltage: 50V- Maximum operating current: 0.5A- Can support 500 VAC for 1 minute- Step between pins: 2.54mm / 0.1 "- Pin size: 4.5x0.5x15 / 0.77 "x0.19"- Type of current: DC- Pins to be welded- Switch action: 2 ON / OFF positions- Shape of interrupter: rectangular- Size: 16x6.5x15 / 0.2 "x0.02" Code K0188 Available Price €0.48
Rocker Switch KCD11 250V/3A On/Off SPST Rocker Switch 3A 250V On/Off SPST features: - AC 250V 3A 2 Pin ON/OFF I/O SPST Snap in mini oscillating switch- Rocker switch; Type: On/Off (SPST)- Control on and off SPST and 2 terminals- Voltage and Current: AC250V, 3A- Overall size: ~ 1.5 x 1 x 1.7 cm/0.6"x 0.4" x 0.7 "(L*W*H)- Mounting hole size: 1.35 x 0.8 cm/0.53"x 0.315" (L*W)- Black Code K0092 Available Price €0.95
Metal Switch 16mm Stainless Steel Latching Metal Switch 16mm Stainless Steel features:- For panel N/A NO 2A 36V Stainless Steel On/Off- Type of operation: On/Off- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A/36VDC- Type of terminal: Screw- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0095 Available Price €3.69
Momentary Switch Push Button Black N/O 7mm Momentary Switch Push Button Black N/O 7mm features: - Momentary pushbutton N/O (normally open)- Black button- Dimensions approx. 7 mm x 27 mm- Recessed with nut and washer- Load current (supported): 1A to 230V / 2A to 125V- Drill to embed: 7 mm +/- 0.2- Operating temperature: -55ºC to + 85ºC Code K0157 Available Price €0.45
Push button 6x6x4mm Push button 6x6x4mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x4.3mm Code K0079 Available Price €0.21
Vertical Slide Switch 3P2T 50V 0.5A 6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.It is also a great component for DIY. Vertical Slide Switch 3P2T 50V 0.5A features: - Type: 3P2T- Contact resistance: 30 MΩ max.- Insulation resistance: 100 MΩ- Maximum operating voltage: 50V- Maximum operating current: 0.5A- Can support 500 VAC for 1 minute- Step between pins: 2.54mm / 0.1 "- Pin size: 4.5x0.5x15 / 0.77 "x0.19"- Type of current: DC- Pins to be welded- Switch action: 2 ON / OFF positions- Shape of interrupter: rectangular- Size: 16x6.5x15 / 0.2 "x0.02" Code K0188 Available Price €0.48
DIP Switch - DS-04 Horizontal High Profile 4 Positions The DIP switch type THT (4 rows 8 Pins) with a pitch of 2.54mm / 0.1 ". It works with the current of 50mA DC 12V. Code K0264 Available Price €0.79
Switch On/On 3-pin 6A SPDT This switch can be used for development projects and for the industry. All metal parts are not oxidized, the insulation material is of high quality.Its pins protected by an anti oxidant makes welding much easier. Switch On/On 3-pin 6A SPDT features: - Type: Latch SPDT- Material: Plastic, metal- Maximum operating current and voltage: 3A / 250V, 6A / 125V- Number of pins: 3- Pin size: 4.5x2 mm- Type of current: AC/DC- Pins to be welded- Switch action: 2 positions On/On- Size: 13.2x12.7x33.3mm Code K0420 Available Price €0.49
12V Push Button LED Red 16mm 12V Push Button LED Red 16mm features:- Momentaneo panel N/A NO with return 2A Steel- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0096 Available Price €5.89
Switch Button 8x8mm on-off Switch Button 8x8mm on-off features:- Switch terminals: Weldable- Measures: 8x8x13mm Code K0078 Available Price €0.22
Push button 6x6x5mm 2pins Push button 6x6x4mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x45mm -Quantity: 1 unit Code K0269 Available Price €0.24
Push button 6x6x4mm Push button 6x6x4mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x4.3mm -Quantity: 1 unit Code K0201 Available Price €0.21
12V Momentary LED Pushbutton Blue 22mm N/A NO Momentary LED Pushbutton Blue 22mm N/A NO features:- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC-24VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Blue Code K0310 Available Price €7.75
Metal Switch 16mm Stainless Steel Latching Metal Switch 16mm Stainless Steel features:- For panel N/A NO 2A 36V Stainless Steel On/Off- Type of operation: On/Off- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A/36VDC- Type of terminal: Screw- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0095 Available Price €3.69