Battery holder 2x 18650 3,7V Parallel Lithium Battery Instruction: - The drawing of the polarities is not correct, it is wrong - Put the batteries in parallel Characteristic: - Cable 15cm long - Measures 74x42x 20mm - Weight: 10 gr. (Approx.) - Stack length max 67mm Code PP016 Available Price €1.85
USB Cable A to Micro USB B 150cm for Arduino Leonardo, Due USB Cable A to Micro USB B 150cm Arduino Leonardo, Due features: - Color:black- Length: 150cm Code K0205 Backorder Price €2.59
Battery LIPO 2800mAh 3.7V Lithium polymer battery 3.7 V with the capacity of 2800 mAh. Includes PCM safety chip (protection against overcharge, over-discharge, short circuit). Code PP115 ✗ Out-of-Stock Price €8.90
Nano V3.0 Terminal Block Adapter Nano V3.0 Terminal Block Adapter features: - Nano V3.0 Atmega328P adapter with soldered connectors - PCB dimensions: 53mm x 35mm Code B0024 Available Price €4.49
DHT22/AM2302 Temperature Humidity Sensor The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement. This sensor, unlike DHT11, is capable of measuring negative temperature values and measures tenths of a degree. DHT22/AM2302 Temperature Humidity Sensor features: - Voltage Operating: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy - Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy - Maximum sampling rate: 2 seconds Code S0018 Available Price €3.95
BMP280 Temperature Barometric Pressure Sensor Module/SPI This module includes the BMP280 component that converts atmospheric pressure, temperature and humidity with high precision into a digital signal.The equipment uses the two I2C and SPI interfaces. The very good measurements made by the BMP280 allows the module to be used as an altimeter.Its 5-pin straight connector allows easy connection to other electronic boards. BMP280 Temperature Barometric Pressure Sensor Module/SPI features: - Interfaces: -I2C (up to 3.4 MHz) -SPI (up to 10 MHz)- Supply voltage: 1.8-5VDC- Module operating range: - Temperature: -40ºC to + 85ºC0-100% - Pressure: 300-1100 hPa- Resolution of the measures: - Temperature: 0.01ºC Code M0134 Available Regular price €4.99 -€1.00 Price €3.99
Solar panel DIY 6V 0.6W Solar panel DIY 6V 0.6W features: - Mobile DIY Solar System Photovoltaic Charger Cell - Working voltage: 6V - Output power: 0.6W - Working current: 0-200 mA - Product size: 90x60x3 mm - Includes soldered power cables. Code A0091 Available Price €2.89
Metal Switch 16mm Stainless Steel Latching Metal Switch 16mm Stainless Steel features:- For panel N/A NO 2A 36V Stainless Steel On/Off- Type of operation: On/Off- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A/36VDC- Type of terminal: Screw- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0095 Available Price €3.69
Arduino Nano 33 Iot Nano 33 IoT as the name would suggest is an WiFi enabled version of the famous Nano. It has an upgraded microcontroller to ARM Cortex SAMD21 y el módulo NINA-W10 (based on ESP32) from u-blox and a module IMU LSM6DS3. Code BAR32 Available Price €26.99
ARDUINO PORTENTA VISION Shield Ethernet It is the ideal industrial upgrade for the powerful Arduino Portenta H7 that adds a low power Himax camera, two microphones, Ethernet connectivity and microSD slot, everything you need for the fast creation of cutting-edge ML applications. Code ASX21 Backorder Price €57.90
Arduino Nano Every Arduino has decided to further develop its catchy Nano project in the direction of more power. Nano Every is the simplest of the new series as it doesn´t include any sensors nor connectivity solution, however still significantly more powerful than standard Nano (50% more program memory and 2 times more RAM). Above characteristics make it perfect for projects of small devices with more advanced functionalities, such as audio processing or robotics. Code BAR33 ✗ Out-of-Stock Price €20.99
Arduino MKR FOX 1200 (without antenna) The Arduino MKR FOX 1200 board offers a practical and cost-effective solution for adding Sigfox connectivity to projects requiring low power. Code ABX14R ✗ Out-of-Stock Price €43.49
Arduino Nano 33 Ble Nano was already a great invention and a super facilitator of many projects, but with Nano BLE opens yet another set of opportunities. First of all, the BLE module - the newest and lowest energy consumption connectivity solution, which effectively allows you to leverage the same technology as used in the newest mass-produced electronic devices Code BAR34 Available Price €33.99
Arduino NICLA Sense ME Nicla Sense ME is the smallest Arduino-developed board equipped with a range of the latest Bosch environmental and motion sensors. The module is based on the nRF52832 ARM Cortex M4 chip clocked at 64 MHz with 512 kB of Flash, 64 kB of RAM and 2 MB of SPI Flash and 2 MB of QSPI embedded memory. The Nicla Sense ME features the Bosch BHI260AP, BMP390, BMM150 and BME688 embedded sensors. Code ABX00050 Last items in stock Price €95.59
Arduino Kit Starter Oficial Arduino Starter Kit is a perfect kit to start your adventure with Arduino. It offers a range of original components, which ensure compatibility with all Arduino parts and give you access to full range of official materials. Additionally, you get a 15 projects booklet, which is pretty much all you need to start rolling with your Arduino projects Code KA002 Available Price €105.95
Arduino Oplà IoT Kit - Spanish - Official Internet of Things Kit This new official Arduino Stuff online starter kit is the perfect kit to start your adventure with Arduino. It offers everything you need to introduce your home or environment to the world of home automation and Smart Home. This programmable platform consists of various sensors, touch buttons, actuators, and even a screen, all embedded inside a sophisticated spherical housing, allowing you to add smart connectivity to your devices. The 8 projects included in the Oplà IoT Kit allow users to turn everyday devices into intelligent devices, which can be remotely controlled from a mobile phone. Code AKX26 Last items in stock Price €145.90
Arduino Starter Kit Classroom Pack The ideal package for teachers looking for classroom solutions that introduce programming and electronics through fun and engaging interactive projects. It is a ready-made package with the curriculum available for ready-made classes - it comes with a booklet of 15 introduction classes written by Arduino team. The Arduino Starter Kit class package is a solution package, containing six of the popular Arduino Starter Kits. This classroom package is for a classroom of at least twelve students - the recommended ratio is two students per kit - and is intended for use by middle school teachers looking for a comprehensive educational solution based on the Arduino platform. Code KA007 Last items in stock Price €599.00
Arduino Uno Rev3 SMD Arduino Uno R3 SMD is a variation of the Uno with SMD. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power connector, an ICSP header and a reset button. In addition, Uno SMD offers the following additional features: - ATmega16U2 instead of 8U2 as a USB to serial converter - 1.0 Code A000073 Backorder Price €24.99
Arduino Pro PORTENTA H7 The Arduino Portenta H7 represents a new family of chips designed for IoT applications. The board uses the STM32H747 microcontroller equipped with Cortex-M7 and Cortex-M4 cores, which allows it to run programs written in Arduino®, MicroPython or JavaScript. In addition, the Arduino Portent H7 is characterised by high performance and at the same time energy efficiency. Code ABX42 Available Price €125.99
Arduino Leonardo The Arduino Leonardo is one of the most popular versions of the series, behind only the legendary Uno plate to which it has very similar features (see our comparison below). The board contains a microcontroller ATmega32u4 with the participation of 20 digital inputs/outputs, of which 7 can be used as PWM outputs and 6 analog inputs. The system works with the clock signal with the frequency of 16 MHz, has 32K Flash and 2.5 KB of SRAM RAM. Code BAR57 ✗ Out-of-Stock Price €22.13
Arduino Kit Starter Oficial Arduino Starter Kit is a perfect kit to start your adventure with Arduino. It offers a range of original components, which ensure compatibility with all Arduino parts and give you access to full range of official materials. Additionally, you get a 15 projects booklet, which is pretty much all you need to start rolling with your Arduino projects Code KA002 Available Price €105.95
Arduino Uno Rev3 SMD Arduino Uno R3 SMD is a variation of the Uno with SMD. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power connector, an ICSP header and a reset button. In addition, Uno SMD offers the following additional features: - ATmega16U2 instead of 8U2 as a USB to serial converter - 1.0 Code A000073 Backorder Price €24.99
Arduino Nano Every Arduino has decided to further develop its catchy Nano project in the direction of more power. Nano Every is the simplest of the new series as it doesn´t include any sensors nor connectivity solution, however still significantly more powerful than standard Nano (50% more program memory and 2 times more RAM). Above characteristics make it perfect for projects of small devices with more advanced functionalities, such as audio processing or robotics. Code BAR33 ✗ Out-of-Stock Price €20.99
Arduino MKR FOX 1200 (without antenna) The Arduino MKR FOX 1200 board offers a practical and cost-effective solution for adding Sigfox connectivity to projects requiring low power. Code ABX14R ✗ Out-of-Stock Price €43.49
Dipole Pentaband waterpoof Antenna A waterproof pentaband antenna X000016 for all your wireless projects with Arduino and development boards Code X0016R Available Price €5.95
TinkerKit Braccio Robot Arduino - Robot Arm 6 DOF The Tinkerkit Braccio Robot, is a fully operational and functional robot arm, with 6 degrees of freedom, easily controlled through Arduino. It can be assembled in different ways to use it in the applications that are required, such as moving objects, connecting a camera or a solar panel. Discover the unlimited potential of robotics and mechanics with BRACCIO! Code T050000 Available Regular price €286.49 -€30.00 Price €256.49
Arduino NICLA Vision Nicla Vision combines a powerful STM32H747AII6 Dual ARM® Cortex® M7/M4 IC processor with a TinyML-enabled 2 MP colour camera, as well as a smart 6-axis motion sensor, integrated microphone and distance sensor. Supports MicroPython, and offers WiFi and Bluetooth® Low Energy connectivity. Code ABX00051 Last items in stock Price €120.99
Arduino Oplà IoT Kit - Spanish - Official Internet of Things Kit This new official Arduino Stuff online starter kit is the perfect kit to start your adventure with Arduino. It offers everything you need to introduce your home or environment to the world of home automation and Smart Home. This programmable platform consists of various sensors, touch buttons, actuators, and even a screen, all embedded inside a sophisticated spherical housing, allowing you to add smart connectivity to your devices. The 8 projects included in the Oplà IoT Kit allow users to turn everyday devices into intelligent devices, which can be remotely controlled from a mobile phone. Code AKX26 Last items in stock Price €145.90