Protoboard Breadboard 9x15cm

Ideal for projects with ARDUINO, Smart Car
Detects transparent and translucent obstacles
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:
- Current consumption: up to 100 mA
- Supply voltage 5V
- Current consumption <25mA
- Response time of 2 ms
- Measured distance: 3-80cm 15st angle
- Screw to adjust the sensitivity, the back
- Output status led indicator
- Operating temperature: -25°C - + 55°C
- Material: high-strength plastic
- Type of output: normally open, NPN
- Dimensions: 18 mm in diameter, Length 45 mm
- Cable length 55cm
- Departures:
      - Brown: +
      - Blue: -
      - Black: OUT

Display OLED 0.96" 128x64 White I2C 4 Pin features:
- Interface: I2C (logical level 3.3V)
- Resolution: 128x64
- Angle of view:> 160 degree
- Screen color: white
- Screen Dimension: 2.43cm / 0.96 "
- IC Controller: SSD1306
- Power supply: 3.3V - 5VDC
- Operating temperature: -20 ° C - 70 ° C
- Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 "
- Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ...
- It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface.
- The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver.

16GB Class 10 MicroSD memory card with adapter features:
- Capacity 16GB
- Class 10
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3 - Includes adapter

20x Ceramic Capacitor 10pF 50v 2,54 PCB PIC Arduino 0.022uF features:
-Type: ceramic NPO
-Tolerance: +/-5%
-Dimensions: diameter 5mm, pitch 2.54mm

Flux Colophony Rosin Core 100g features:
Flux rosin, solid resin, neutral ph for correct electronic welding.
-Does not cause corrosion of non-ferrous metals
-Does not cause short circuits
-It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners
-Cleans and prepares the surfaces and components to be welded, and facilitates the adherence and fluidity of the tin, improving welding in electronics works
Use a toothpick for the application. Do not apply in excess.
SECURITY:
-Use in ventilated spaces. Do not inhale vapors that are released when welding
-Keep the pot tightly closed and out of reach of children
-Do not eat. It is not toxic
-Rarely irritating to skin contact

Sensor Module FZ0888 IR Infrared Speed Meter features:
- The FZ0888 encoder module is a device that can help you in the creation of your robotics and automation project, Whether you want to know the speed of a motor or its exact position
- The module has a digital output (DO) which can be connected to your preferred microcontroller.
The operating mode:
- When the sensor is blocked, the DO output is high
- The AO signal is not enabled in this module
- Power supply: 3.3-5V
- Power consumption current 20 mA max
- PCB dimensions: 32 x 14 mm

3-Pin Female PCB Header Short Strip features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through

5x Push Switch Button B3F Omron Red Key 12mm features:

- 5x Push Buttons B3F Omron Key
- Maximum current: 50 mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals: weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm