Silicone welding mat with departments - AS11 450 x 300 mm Price €23.90 Add to cart Resistors Kit 5% 0,25W 1/4W Price €2.80 Add to cart Kapton type 5mm thermal tape Price €1.59 Add to cart Flux Solder Paste in Tin Can 100g Price €4.99 Add to cart AG BORAX 500g Unblocker Price €4.79 Add to cart Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Price €3.85 Add to cart Arduino Nano Every Price €20.99 Add to cart Welding Acid AG 35ml Price €2.69 Add to cart 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84 Error in the product description. Report It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84 €2.49 2,06 tax excl. Tax included Price €2.49 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €15.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €20.00 GLS 24-72H (Ceuta y Melilla): €30.00 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €40.00 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €30.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
Resistors Kit 5% 0,25W 1/4W Price €2.80 Add to cart Kapton type 5mm thermal tape Price €1.59 Add to cart Flux Solder Paste in Tin Can 100g Price €4.99 Add to cart AG BORAX 500g Unblocker Price €4.79 Add to cart Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Price €3.85 Add to cart Arduino Nano Every Price €20.99 Add to cart Welding Acid AG 35ml Price €2.69 Add to cart 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84 Error in the product description. Report It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84 €2.49 2,06 tax excl. Tax included Price €2.49 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €15.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €20.00 GLS 24-72H (Ceuta y Melilla): €30.00 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €40.00 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €30.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
Kapton type 5mm thermal tape Price €1.59 Add to cart Flux Solder Paste in Tin Can 100g Price €4.99 Add to cart AG BORAX 500g Unblocker Price €4.79 Add to cart Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Price €3.85 Add to cart Arduino Nano Every Price €20.99 Add to cart Welding Acid AG 35ml Price €2.69 Add to cart 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84 Error in the product description. Report It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84
Flux Solder Paste in Tin Can 100g Price €4.99 Add to cart AG BORAX 500g Unblocker Price €4.79 Add to cart Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Price €3.85 Add to cart Arduino Nano Every Price €20.99 Add to cart Welding Acid AG 35ml Price €2.69 Add to cart 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84 Error in the product description. Report
AG BORAX 500g Unblocker Price €4.79 Add to cart Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Price €3.85 Add to cart Arduino Nano Every Price €20.99 Add to cart Welding Acid AG 35ml Price €2.69 Add to cart 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84 Error in the product description. Report
Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Price €3.85 Add to cart Arduino Nano Every Price €20.99 Add to cart Welding Acid AG 35ml Price €2.69 Add to cart 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84
Arduino Nano Every Price €20.99 Add to cart Welding Acid AG 35ml Price €2.69 Add to cart 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84
Welding Acid AG 35ml Price €2.69 Add to cart 10 other products in the same category Previous Next Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79 Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95 Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84
Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49
Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59
Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89
Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79
Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95
Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29
Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90
Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44
Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84
Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49
Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59
Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89
Thermal Silicone Paste Heatsink Temperature 100g It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm Code Q0038 Last items in stock Price €5.79
Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95
Thermal Pad Silicone Heat Pad CPU GPU Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29
Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90
Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44
Thermal Paste Syringe 3.1W / mK CPU Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.84