Fan 12V 2x Cables PC CPU case Price €3.95 Add to cart Desoldering Wire 1mm 1.0 Price €1.79 Add to cart Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Price €3.85 Add to cart 6-pin/10-pin Kanda DIL adapter Price €1.29 Add to cart SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base Price €3.79 Add to cart Micro:bit BBC v2 - WiFi Single Board Micro-Computer - Starter Pack Price €25.90 Add to cart 10x Male-Male Cables 20cm Jumpers Dupont 2,54 Price €1.69 Add to cart LED Power Diode COB 10W 3000K White SMD Price €2.11 Add to cart 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Error in the product description. Report It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 €5.79 4,79 tax excl. Tax included €5.79 Add to cart Last items in stock Order until 4pm we will send today Order until 4pm we will send today Delivery options Recogida en Valencia: €0.00 GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €12.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €15.00 GLS 14:00 (España penínsular y Portugal): €10.99 GLS 24H (España penínsular y Portugal): €5.77 GLS 24-72H (Ceuta y Melilla): €30.00 GLS 24H (Portugal): €5.77 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €33.05 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €25.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Przesyłka paczkomatowa - standardowa: €9.35 Paczkomaty 24/7: €9.34 Paczkomaty 24/7: €11.99 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
Desoldering Wire 1mm 1.0 Price €1.79 Add to cart Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Price €3.85 Add to cart 6-pin/10-pin Kanda DIL adapter Price €1.29 Add to cart SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base Price €3.79 Add to cart Micro:bit BBC v2 - WiFi Single Board Micro-Computer - Starter Pack Price €25.90 Add to cart 10x Male-Male Cables 20cm Jumpers Dupont 2,54 Price €1.69 Add to cart LED Power Diode COB 10W 3000K White SMD Price €2.11 Add to cart 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Error in the product description. Report It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 €5.79 4,79 tax excl. Tax included €5.79 Add to cart Last items in stock Order until 4pm we will send today Order until 4pm we will send today Delivery options Recogida en Valencia: €0.00 GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €12.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €15.00 GLS 14:00 (España penínsular y Portugal): €10.99 GLS 24H (España penínsular y Portugal): €5.77 GLS 24-72H (Ceuta y Melilla): €30.00 GLS 24H (Portugal): €5.77 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €33.05 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €25.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Przesyłka paczkomatowa - standardowa: €9.35 Paczkomaty 24/7: €9.34 Paczkomaty 24/7: €11.99 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Price €3.85 Add to cart 6-pin/10-pin Kanda DIL adapter Price €1.29 Add to cart SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base Price €3.79 Add to cart Micro:bit BBC v2 - WiFi Single Board Micro-Computer - Starter Pack Price €25.90 Add to cart 10x Male-Male Cables 20cm Jumpers Dupont 2,54 Price €1.69 Add to cart LED Power Diode COB 10W 3000K White SMD Price €2.11 Add to cart 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Error in the product description. Report It facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.The technology of oxidation, solutions in water of acids, alkalis and sales, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste Heatsink Temperature 100g features: - Density at 20 °C: 2.58 G / cm3- Flash point: 350 °C- Freezing point: -50 °C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150°C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89
6-pin/10-pin Kanda DIL adapter Price €1.29 Add to cart SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base Price €3.79 Add to cart Micro:bit BBC v2 - WiFi Single Board Micro-Computer - Starter Pack Price €25.90 Add to cart 10x Male-Male Cables 20cm Jumpers Dupont 2,54 Price €1.69 Add to cart LED Power Diode COB 10W 3000K White SMD Price €2.11 Add to cart 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Error in the product description. Report
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base Price €3.79 Add to cart Micro:bit BBC v2 - WiFi Single Board Micro-Computer - Starter Pack Price €25.90 Add to cart 10x Male-Male Cables 20cm Jumpers Dupont 2,54 Price €1.69 Add to cart LED Power Diode COB 10W 3000K White SMD Price €2.11 Add to cart 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89 Error in the product description. Report
Micro:bit BBC v2 - WiFi Single Board Micro-Computer - Starter Pack Price €25.90 Add to cart 10x Male-Male Cables 20cm Jumpers Dupont 2,54 Price €1.69 Add to cart LED Power Diode COB 10W 3000K White SMD Price €2.11 Add to cart 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89
10x Male-Male Cables 20cm Jumpers Dupont 2,54 Price €1.69 Add to cart LED Power Diode COB 10W 3000K White SMD Price €2.11 Add to cart 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89
LED Power Diode COB 10W 3000K White SMD Price €2.11 Add to cart 10 other products in the same category Previous Next Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59 Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44 N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75 Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49 Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95 Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90 Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49 Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59 Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89
Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59
Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44
N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75
Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49
Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61
3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95
Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49
Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59
Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89
Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59
Silicone Isolating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. Silicone Isolating Paste N 60g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Last items in stock Price €2.44
N Silicone Insulating Paste 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Price €1.75
Thermal Silicone Paste 7g Heat Sink It facilitates the transfer of heat between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures. High quality - manufactured in EU Thermal Silicone Paste 7g Heat Sink features: - Density at 20 ° C: 2.58 G / cm3- Flash point: 350 ° C- Freezing point: -50 ° C- Refractive coefficient: 1.405- Specific heat at 50 ° C: 0.243 Cal / g K- Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K- Dielectric constant at 100 Hz: 4.7 (± 0.1) Code Q0051 Available Price €2.49
Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Available Price €2.61
3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D 3x Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.95
Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €8.39 -€3.49 Price €4.90
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Backorder Price €3.49
Thermal Pad Silicone Heat GPU CPU 130x20x1mm Thermal Pad Silicone Heat GPU CPU 130x20x1mm features: - The tapes are thermally used as an application of a thermal paste.- The tapes are extremely flexible. Its high compressibility ensures an excellent fit to the elements that need cooling.- Thermopad that facilitates the transfer of calories between the electronic components and the radiator.- Thermal conductivity 6 W / mK- Thickness: 1mm- Quantity: 1 unit- High quality - manufactured in EU- Dimensions 130x20x1mm Code Q0044 Available Price €4.59
Thermo Conductive Grease Paste 340°C 3D Prusa 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Last items in stock Price €8.89