Thermal conductive paste HP 340°C 100g

Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features:
- The thermal conductivity of ~ 3.1 W/mK
- Not suitable for aluminum radiators
- No driver
- 1,5ml content

Thermal Pad Silicone Heat Pad CPU GPU features:
- The transfer of heat between the electronic components and the radiator is facilitated.
- Thermal conductivity 1,5W / mK
- Thickness 1mm quantity: 1 unit
- High quality - manufactured in EU
- Thermopad 100x20x1mm
- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling

Silicone Thermal Paste Syringe 25g features:
- Density at 20°C: 2.58 G/cm3
- Flashpoints: 350°C
- Freezing point: -50°C
- Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K
- Constant dielectric at 100 Hz: 4.7 (± 0.1)
- Cross resistance: 5 x 10 to the power 14 Ohm x cm
- Loss rate at f = 100 Hz: 0.020 (± 0.003)
- Range of operating temperature: -50~200°C

Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia.

Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K

Totally new and of high quality.
Dissipate the heat of the computer by refrigerating it effectively.
It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.
Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features:
  - Color white
- Surface drying time [25 ° C, min]: 2- 8
- Hardness: 45 -75
- Tensile strenght (Mpa): 2.0
- Elongation (%): 100
- Thermal Conductivity W / mk:> 1,0
- Volume Resistance (c-in / W): <2.0 x 10 * 15
- Dielectric strength (KV / mm): 20
- Dielectric Constant: 3.0
- Dielectric loss factor (60Hz): 0.003
- Operating temperature (max): 200 ° C

Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. 

Thermo Silicone Paste Cleaner features:
This product is safe and easy to use with a pleasant aroma of citrus.
It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned
- Wait 1-2 minutes
- Clean with a cloth

The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features:
- The breaking voltage is ~ 30kV / mm.
- Preserves rubber, plastic
- A wide range of operating temperatures: -50 ° C to 200 ° C
- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU

The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. The breaking voltage is ~ 30kV / mm.
Preserves rubber, plastic. A wide range of operating temperatures: -50 ° C to 200 ° C. Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU