Load Cell Weight Sensor 2kg Load cell Load Cell Weight Sensor 2kg features: - Load cell to measure weight up to 2kg- The transducer measures the deformation of the metal structure and converts it into a few mV- Load range: 2kg- Operating voltage: 3VDC ~ 14 VDC- Nominal output: 1.0 ± 0.15mV / V- Repeatability: 0.03% FS- Effect of the temperature at the outlet: 0.01% F.S / °C- Effect of temperature on zero: 0.05% F.S / °C- Zero: ± 0.1000 mV / V- Input impedance: 1115 + -10% Ω- Output impedance: 1000 + - 10% Ω- Insulation resistance:> = 1000 MΩ- Safe Overload Rate: 150% FS- Final overload rate: 200% FS- Temperature range: -20 - 60 °C- Material: Aluminum alloy- Degree of protection: IP65 Code M0125 Available Regular price €2.47 -€0.99 Price €1.48
Resistor 330 Ohm 5% 0,25W 1/4W Resistor 330 Ohm 5% 0,25W 1/4W features:-330 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0009 Available Price €0.07
Led Matrix 8x8 MAX7219 soldered Led Matrix 8x8 MAX7219 features: - MAX7219 controller module with 8x8 led matrix + cables - 8X8 LED matrix controlled by MAX7219 chip - Led 3mm red color - SPI communication - Voltage: 4.7 - 5.3V DC - Interfaces to manage multiple modules in cascade - Matrix dimensions: 32mm x 32mm x 8mm - PCB dimensions: 32mm x 50mm Code M0043 ✗ Out-of-Stock Price €2.44
NFC RFID Keychain Tag 13.56 MHz NFC RFID Keychain Tag 13.56 MHz features: - 32 bit unique code - Protocol: ISO14443 - Compatible with NFC Mifare 1k - Memory: 1kB EEPROM - Operating frequency: 13.56MHZ - Communication speed: 106Kboud - Reading distance: 2.5-10CM - Reading time: 1-2MS - Working temperature: -20ºC to 85ºC - Number of uses 100,000 times - Data retention: 10 years - Material: ABS - Dimensions 40.5 x 32 x 4.2 mm Code M0030 Available Price €0.82
Prototype Protoboard Breadboard 170 points for Arduino Prototype Protoboard Breadboard 170 points Arduino features:- 170 connections- Base with adhesive to attach it to the work surface- Measurements: 45x35x9mm- Various colors Code PB001 Available Price €0.95
Sensor Module ML8511 UV Sensor Module ML8511 UV features: - The module converts the photocurrent into voltage to detect UV intensity - The analog voltage is proportional to UV light detecting - The has a power saving mode of up to 0.1uA, suitable for smart portable devices or mobile phones for use - Power supply: 5V - Analog output - Captured wavelength: 280-390nm - Ultra low power consumption - Meteorological applications, skincare, industrial UV level measurement - Dimensions of PCB: 30x22mm Code S0040 ✗ Out-of-Stock Price €4.37
L7805 Voltage Regulator 5V 1.5A TO-220 L7805CV Voltage Regulator 5V 1.5A TO-220 features:-Type Output: Fixed-Voltage Output: 5V-Manufacturer: ST Microelectronics-Output current: 1.5A-Max input voltage: 35V-Input input min.: 5V-Operational temperature: 0ºC to + 125ºC-Encapsulated: TO-220-Polarity: Positive Code T0022 Available Price €0.32
Potentiometer B10K linear Characteristic: -10k OHM kΩ - linear potentiometer 10k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0067 Available Price €0.82
Screen OLED 1.3" A Blue 128x64 SPI/I2C Screen OLED 1.3" A Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel screen - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves black on screen and energy efficiency - very low power consumption Code P0023 ✗ Out-of-Stock Price €7.02
Display OLED 0.96" 128x64 White I2C 4 Pin Display OLED 0.96" 128x64 White I2C 4 Pin features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degree - Screen color: white - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ... - It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface. - The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver. Code P0091 Available Regular price €5.37 -€2.51 Price €2.86
Screen OLED 0.96" 128x64 Blue I2C It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features: - Interface: I2C (logical level 3.3V) - Resolution: 128 x 64 - Angle of view: & gt; 160 degree - Screen color: blue - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70 - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " Code P0096 Available Regular price €5.37 -€1.51 Price €3.86
Display OLED 0.96" 128x64 White with ZIF FPC connector Display OLED 0.96" 128x64 White with ZIF FPC connector features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3.3V - Angle of view: 160 degrees - Interface 3-wire SPI, 4-wire SPI, I2C, parallel - Low consumption: 0.08W - Use temperature: -30 to 85 ºC - 30-pin connector - Display Mode: passive matrix - Display Color: monochrome (white) - Panel size: 26.70 * 19.26 * 1.4mm - Active area: 21,744 * 10,864mm - Pitch size: 0.17 * 0.17mm - Pixel size: 0.154 * 0.154mm - Supports many control chip: 51 Series, MSP430 Series, STM32 /> Code P0153 Available Price €4.01
Screen OLED 0.96" 128x64 White SPI I2C 7 Pin Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption: 0.08W - Operating temperature: -20 to 70 ºC - PCB board dimension: 27 x 27mm - Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. - OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc. Code P0026 Available Regular price €4.13 -€1.50 Price €2.63
Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "Display of 128 * 64 pixels - one yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption energy. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0024 ✗ Out-of-Stock Price €6.44
Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "128 * 64 pixel display - One yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption of energy. Code P0025 Available Price €6.44
0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display 0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degrees - Screen color: blue and yellow (1/4 above yellow and 3/4 below blue) - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer, instruments, DIY projects, etc ... - It is an OLED screen module with blue-yellow display and with a resolution dot matrix 128x64 and an IC2 interface. - The display includes the driver controller SSD1306 128 x 64 Segment Driver / OLED / PLED Common. Code P0134 Available Regular price €6.20 -€1.00 Price €5.20
Screen OLED 1.3" A Blue 128x64 SPI/I2C Screen OLED 1.3" A Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel screen - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves black on screen and energy efficiency - very low power consumption Code P0023 ✗ Out-of-Stock Price €7.02
Display OLED 0.96" 128x64 White I2C 4 Pin Display OLED 0.96" 128x64 White I2C 4 Pin features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degree - Screen color: white - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ... - It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface. - The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver. Code P0091 Available Regular price €5.37 -€2.51 Price €2.86
Screen OLED 0.96" 128x64 Blue I2C It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features: - Interface: I2C (logical level 3.3V) - Resolution: 128 x 64 - Angle of view: & gt; 160 degree - Screen color: blue - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70 - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " Code P0096 Available Regular price €5.37 -€1.51 Price €3.86
Display OLED 0.96" 128x64 White with ZIF FPC connector Display OLED 0.96" 128x64 White with ZIF FPC connector features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3.3V - Angle of view: 160 degrees - Interface 3-wire SPI, 4-wire SPI, I2C, parallel - Low consumption: 0.08W - Use temperature: -30 to 85 ºC - 30-pin connector - Display Mode: passive matrix - Display Color: monochrome (white) - Panel size: 26.70 * 19.26 * 1.4mm - Active area: 21,744 * 10,864mm - Pitch size: 0.17 * 0.17mm - Pixel size: 0.154 * 0.154mm - Supports many control chip: 51 Series, MSP430 Series, STM32 /> Code P0153 Available Price €4.01
Screen OLED 0.96" 128x64 White SPI I2C 7 Pin Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption: 0.08W - Operating temperature: -20 to 70 ºC - PCB board dimension: 27 x 27mm - Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. - OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc. Code P0026 Available Regular price €4.13 -€1.50 Price €2.63
Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "Display of 128 * 64 pixels - one yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption energy. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0024 ✗ Out-of-Stock Price €6.44
Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "128 * 64 pixel display - One yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption of energy. Code P0025 Available Price €6.44
0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display 0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degrees - Screen color: blue and yellow (1/4 above yellow and 3/4 below blue) - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer, instruments, DIY projects, etc ... - It is an OLED screen module with blue-yellow display and with a resolution dot matrix 128x64 and an IC2 interface. - The display includes the driver controller SSD1306 128 x 64 Segment Driver / OLED / PLED Common. Code P0134 Available Regular price €6.20 -€1.00 Price €5.20