2N2222 NPN 40V 800mA transistor pack 10pcs Product Category: Bipolar Transistor, NPN. 2N2222 NPN 40V 800mA 300MHz transistor features: - Package / Case: TO-92 - Quantity: 20 units - Collector-base voltage VCBO: 75V - Collector-emitter voltage VCEO: 40V - VEBO emitter-base voltage: 6V - Continuous collector current: 600mA - DC MAX collector current: 800mA - Maximum power dissipation: 1.6W Code T0006 Available Price €0.09
USB to Micro USB On/Off Switch for Arduino Charger Cable It has an ON / OFF switch that will cut off power when you don't need it. USB to Micro USB On/Off Switch Arduino Charger Cable features: - Black color - Length: 150cm - Maximum current 1A Code K0054 Available Price €2.85
Module TCRT5000 Infrared Sensor IR Tracker Line Obstacle The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision. The ideal obstacle detection detector for the installation of smart robots. TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object. The working wavelength is 950nm. The transmitter is infrared LED and the phototransistor receiver. By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected). The sensor allows the detection of an object at a distance of up to 12 mm. Code S0025 Available Price €1.85
Wireless Transceiver Module with Antenna CC1101 This external wireless antenna module CC1101 is suitable for Funduino and Arduino projects.The CC1101 module of 1.2K baud consists of a domestic R & Lotes unit to improve the effective communication distance.This is a significant improvement over the CC1100 module.It allows to adjust the speed of the bits for different uses, thus allowing a higher transmission speed.Supports 2-FSK, GFSK and msk modulations. It also has a high sensitivity (1.2kbps @> Code W0083 Available Price €8.49
HC-SR501 Motion Detector Module Passive Infrared PIR Sensor Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º. An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone. Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features: - Infrared sensor with control circuit - Adjustable sensitivity and time - Operating voltage: 4.5V- 20V - Consumption in Idle state: Code S0003 Available Price €1.79
AMS1117 Buck fixed output module 3.3V 800mA AMS1117 Buck fixed output module 3.3V 800mA features: - Based on AMS1117-3.3V regulator - Input Voltage: 4.5 - 12Vdc - Output Voltage: 3.3 Vdc (+/- 0,05V) - Max.output current: 800mA - Operating temperature: -40ºC to + 150ºC - Dimensions: 25mm x 12mm Code A0023 Available Price €1.49
16x2 1602 LCD display Blue IIC/I2C LCD display consists of a 16-character, 2-rows. The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 and many more controllers. Code P0010 Available Price €3.49
XL6009 DC-DC Step-Up Booster Controller LM2577 - The XL6009 module has a superior performance than the LM2577 module - The regulator-booster of High performance Characteristic: - Based on the XL6009E1 regulator - Input voltage: 3V-32V, - Output voltage: 5-35V (adjustable), - Output current: 2A maximum 3A (heat sink is required) - Conversion efficiency: up to 94% - Rectifier: not synchronous rectification - Short circuit protection: current limitation, since recovery - Operating temperature: industrial grade (-40 ° C - 85 ° C) - Load regulation: ± 0.5% - Voltage regulation: ± 0.5% - Size: 50 x 22 x 15 mm Code A0005 Available Price €2.45
MyoWare LED Shield This LED shield goes in set with the MyoWare Muscle Sensor. It is a 10-segment bar graph showing the reads from the sensor. Put the two together and you get a great system that allows you to measure and show your muscle activity. Pretty cool, huh? The shield comes equipped with a LiPo power source making it full autonomous. Code SP025 Last items in stock Price €44.99
LED Display 2-Digit 7-Segment Red Common Cathode LED Display 2-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 2- Segment numbers by digit: 7- Operating temperature: -25°C - + 85°C- Storage temperature: -30°C - + 85°C- Screen with common cathode connection- Screen size: 25x19x8 mm- This product is a 2-digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0120 Available Price €1.49
LED Display 4-Digit 7-Segment Red Common Cathode LED Display 4-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 12- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 4- Segment numbers by digit: 7- Operating temperature: -25 ° C - + 85 ° C- Storage temperature: -30 ° C - + 85 ° C- Screen with common cathode connection- Screen size: 50.3x19x8 mm- This product is a 4-digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0124 Available Price €2.49
LED Display 3-Digit 7-Segment Red Common Cathode LED Display 3-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 12- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 3- Segment numbers by digit: 7- Operating temperature: -25 ° C - + 85 ° C- Storage temperature: -30 ° C - + 85 ° C- Screen with common cathode connection- Screen size: 37.6x19x8 mm- This product is a 3-digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0122 Available Price €1.95
LED 10-Segment Bar Graphics Display Red LED 10-Segment Bar Graphics Display Red features: - Bargraph LED display - Number of segments: 10 - Size: 5mm - Dimensions: 25x10mm - Material GaAsP / GaP - Color: red - Wavelength: 635 nm - Vf / forward /2.1 V - I fw / forward / 30 mA - Iv / Ifw = 20mA / 4 mcd - Number of terminals: 20 Code P0100 ✗ Out-of-Stock Price €1.13
LED Display 1-Digit 7-Segment Red Common Anode This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:.It works with very low current consumption.The segments of this screen are connected with a common anode point.LED Display 1-Digit 7-Segment Red Common Anode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Digit numbers: 1- Segment numbers by digit: 7- Operating temperature: -25°C - + 85°C Code P0117 Available Price €0.85
LED Display 4-Digit 7-Segment Red Common Anode LED Display 4-Digit 7-Segment Red Common Anode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 12- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 4- Segment numbers by digit: 7- Operating temperature: -25°C - + 85°C- Storage temperature: -30°C - + 85°C- Screen with common anode connection- Screen size: 50.3x19x8 mm Code P0123 Available Price €2.49
Traffic light LED red yellow green 5V display module Arduino Red, yellow and green LED traffic light mini kit ideal for educational and beginner Arduino projects. Code M0231 Available Price €2.39
LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots features:- Supply voltage of the LED points: 1.8-2.4 VDC- LED color of the dots: red- Pin numbers: 16- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 120mA- Power consumed per segment: 80mW- Segment numbers (points): 64- Diameter of a point: 3mm- Operating temperature: -35 ° C - + 85 ° C- Storage temperature: -35 ° C - + 85 ° C- Screen with common cathode connection for the rows and common anode for the columns- Screen size: 32x32x8 mm Code P0125 Available Regular price €2.89 -€1.00 Price €1.89
LED Display 1-Digit 7-Segment Red Common Cathode LED Display 1-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 1- Segment numbers by digit: 7- Operating temperature: -25 ° C - + 85 ° C- Storage temperature: -30 ° C - + 85 ° C- Screen with common cathode connection- Screen size: 12.6x19x8 mm- This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0118 Available Price €0.85
MyoWare LED Shield This LED shield goes in set with the MyoWare Muscle Sensor. It is a 10-segment bar graph showing the reads from the sensor. Put the two together and you get a great system that allows you to measure and show your muscle activity. Pretty cool, huh? The shield comes equipped with a LiPo power source making it full autonomous. Code SP025 Last items in stock Price €44.99
LED Display 2-Digit 7-Segment Red Common Cathode LED Display 2-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 2- Segment numbers by digit: 7- Operating temperature: -25°C - + 85°C- Storage temperature: -30°C - + 85°C- Screen with common cathode connection- Screen size: 25x19x8 mm- This product is a 2-digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0120 Available Price €1.49
LED Display 4-Digit 7-Segment Red Common Cathode LED Display 4-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 12- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 4- Segment numbers by digit: 7- Operating temperature: -25 ° C - + 85 ° C- Storage temperature: -30 ° C - + 85 ° C- Screen with common cathode connection- Screen size: 50.3x19x8 mm- This product is a 4-digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0124 Available Price €2.49
LED Display 3-Digit 7-Segment Red Common Cathode LED Display 3-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 12- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 3- Segment numbers by digit: 7- Operating temperature: -25 ° C - + 85 ° C- Storage temperature: -30 ° C - + 85 ° C- Screen with common cathode connection- Screen size: 37.6x19x8 mm- This product is a 3-digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0122 Available Price €1.95
LED 10-Segment Bar Graphics Display Red LED 10-Segment Bar Graphics Display Red features: - Bargraph LED display - Number of segments: 10 - Size: 5mm - Dimensions: 25x10mm - Material GaAsP / GaP - Color: red - Wavelength: 635 nm - Vf / forward /2.1 V - I fw / forward / 30 mA - Iv / Ifw = 20mA / 4 mcd - Number of terminals: 20 Code P0100 ✗ Out-of-Stock Price €1.13
LED Display 1-Digit 7-Segment Red Common Anode This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:.It works with very low current consumption.The segments of this screen are connected with a common anode point.LED Display 1-Digit 7-Segment Red Common Anode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Digit numbers: 1- Segment numbers by digit: 7- Operating temperature: -25°C - + 85°C Code P0117 Available Price €0.85
LED Display 4-Digit 7-Segment Red Common Anode LED Display 4-Digit 7-Segment Red Common Anode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 12- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 4- Segment numbers by digit: 7- Operating temperature: -25°C - + 85°C- Storage temperature: -30°C - + 85°C- Screen with common anode connection- Screen size: 50.3x19x8 mm Code P0123 Available Price €2.49
Traffic light LED red yellow green 5V display module Arduino Red, yellow and green LED traffic light mini kit ideal for educational and beginner Arduino projects. Code M0231 Available Price €2.39
LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots features:- Supply voltage of the LED points: 1.8-2.4 VDC- LED color of the dots: red- Pin numbers: 16- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 120mA- Power consumed per segment: 80mW- Segment numbers (points): 64- Diameter of a point: 3mm- Operating temperature: -35 ° C - + 85 ° C- Storage temperature: -35 ° C - + 85 ° C- Screen with common cathode connection for the rows and common anode for the columns- Screen size: 32x32x8 mm Code P0125 Available Regular price €2.89 -€1.00 Price €1.89
LED Display 1-Digit 7-Segment Red Common Cathode LED Display 1-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 1- Segment numbers by digit: 7- Operating temperature: -25 ° C - + 85 ° C- Storage temperature: -30 ° C - + 85 ° C- Screen with common cathode connection- Screen size: 12.6x19x8 mm- This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0118 Available Price €0.85