Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €4.50
RFID PN532 NFC Module with Card and Pendant NFC module for Educational STEAM Kit. Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Compatible with almost any microcontroller, Arduino, PIC, AVR. It can be used in Access Control projects and Alarm projects. RFID PN532 NFC Module with Card and Pendant features: - Support i2C, SPI, High Speed UART - Support RFID reading and writing - Support P2P communication with peers - Support NFC with phone - Work in NFC Mode or RFID reader/writer Mode - RFID reader/writer supports: - 1k, 4k, Ultralight, and DesFire cards ISO/> Code W0091 Available Price €9.99
SIM900 Four Band GSM GPRS Module with Antenna shield for Arduino SIM900 Four Band GSM GPRS Module with Antenna shield for Arduino features: - GSM / GPRS SIM900 module-based development card / shield from Simcom - The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM Enhanced COM Commands). - The shield also has 12 GPIOs, 2 PWMs and a ADC of the SIM900 module (All of them are 2V8 logic) present on board. - Quad-Band 850/900/1800/1900 MHz: it would work on GSM networks in all countries of the world. - GPRS multi-slot class 10/8 - GPRS mobile station class B - Complies with GSM phase 2/2 + - Class 4 (2 W @> Code W0090 Available Regular price €25.99 -€3.50 Price €22.49
8 Channel 5V 10A Relay Module Arduino compatible 5V Relay Module with 8 opto-coupled channels. This module can be directly controlled by the microcontroller ( Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). 8 Channel Arduino 5V 10A Relay Module features: - Channels: 8 (independent protected with Optocouplers) - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - Isolation: Yes - LED indicator: For each channel - Dimensions: 54x 135mm Code RL008 Available Price €9.49
HC-SR505 Mini Module Motion Detector Infrared PIR Sensor Arduino compatible IR motion detector with a detection range of 3 meters. One sensor electric pyro, which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone. Ideal for projects with ARDUINO, PIC, AVR, STM32. Characteristic: - Operating voltage: 4.5V- 20V - Consumption in idle state: Code S0037 Available Price €2.70
Capsule Electret Condenser Microphones 9.5mm MIC Capsule Electret Condenser Microphones 9.5 MIC features: - Measures: 9.7 x 6.7mm- Impedance: 1.5kΩ- Working current: 0.5mA- Working voltage: 4.5V (1.5-10V)- Bandwidth: 50 ... 16000Hz- Signal to noise ratio: ‰¥58dB- Sensitivity: -42 ± 3dB- Sensitivity tolerance: ± 3dB- Distance between terminals: 2.54mm Code M0020 Available Price €0.79
Soldering Iron 40W Soldering Iron 40W features: - Power: 40W- Power: 230V- Equipped with tip B1- Long length tip: 1mm- Anti-thermal handle- CE, RoHS and TUV certifications Code H0186 Available Regular price €7.99 -€1.00 Price €6.99
Desoldering Wire 1mm 1.0 High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 1mm 1.0 features:- Material: Copper- Length: 1.5m- Width: 1.0mm- Desoldering Braid Solder Remover Wick 1mm / 1.5m- Pure copper braid construction- Quick removal welding- Excellent thermal for a faster and safer desoldering Code H0003 Available Price €1.79
LCD Display Screen 12864ZW 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINOYou can use it with PIC, AVR, STM32LCD Display Screen 12864ZW 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0140 ✗ Out-of-Stock Price €8.32
LCD Display Screen 5V Blue Backlight 8x2 JMD0802B 2 White Characters It is an LCD screen with a resolution of 8x2 characters to white letters. Its operating voltage is 3.3V and is managed through its 14 solderable connections. The control of the visualization is made by the component AIP7660E0 8 pins N-FET which is a linear regulating contractor. LCD Display Screen 5V Blue Backlight 8x2 JMD0802B 2 White Characters features: - Operating voltage: 5V- Model JMD0802B see: 2- Matrix of points: 8x2- Size of the viewing area: 38x16 mm- Linear controller controller: AIP7660E0 8 pin N-FET- Size: 58x32x13.2 mm Code P0131 Available Price €2.49
1602 LCD display case Housing for 16x2 character LCD screens. The screen is fixed to the housing with 4 screws. 1602 LCD display case features: - Transparent acrylic shell, - Includes screws, - Dimensions: 90x40x55mm. Code P0149 Last items in stock Price €1.39
16x2 LCD screen 1602 Blue welded pins It consists of a 16-character, 2-row display The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 16x2 LCD screen 1602 Blue welded pins features: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Includes an adjustable contrast pin - It has soldered pins and is ready to connect - Dimensions (mm): 80 x 36 x 19 Code P0154 Available Price €3.95
LCD 1604 Display Screen Blue Backlight 16x4 characters It consists of a display of 16 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD 1604 Display Screen Blue Backlight 16x4 characters features:- LCD screen, 16 characters and 4 lines- 5V power- Backlit green background, white letters- Include an adjustable contrast pin Code P0150 ✗ Out-of-Stock Price €4.80
LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters It is an LCD screen with a resolution of 8x2 characters to white letters. Its operating voltage is 3.3V and is managed through its 14 solderable connections. The control of the visualization is made by the component AIP7660E0 8 pins N-FET which is a linear regulating contractor. LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters features: - Operating voltage: 3.3V- Model JMD0802B see: 2- Matrix of points: 8x2- Size of the viewing area: 38x16 mm- Linear controller controller: AIP7660E0 8 pin N-FET- Size: 58x32x13.2 mm Code P0130 Available Price €2.49
16x2 1602 LCD display HD44780 Backlit Blue background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. 16x2 1602 LCD display HD44780 Backlit Blue background features: - LCD screen , 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code P0014 Available Regular price €2.65 -€0.75 Price €1.90
LCD Display Screen Green 20x4 2004 - It consists of a screen of 20 characters and 4 rows- Ideal for projects with ARDUINO- You can use it with PIC, AVR, STM32 LCD Display Screen Green 20x4 2004 features: - LCD screen, 20 characters and 4 lines- 5V power- Retro green background illuminated, black letters Code P0017 Available Price €8.49
LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0015 Available Price €9.95
16x2 1602 LCD display Blue IIC/I2C LCD display consists of a 16-character, 2-rows. The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 and many more controllers. Code P0010 Available Price €3.49
LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0015 Available Price €9.95
LCD Display Screen Green 20x4 2004 - It consists of a screen of 20 characters and 4 rows- Ideal for projects with ARDUINO- You can use it with PIC, AVR, STM32 LCD Display Screen Green 20x4 2004 features: - LCD screen, 20 characters and 4 lines- 5V power- Retro green background illuminated, black letters Code P0017 Available Price €8.49
1602 LCD display case Housing for 16x2 character LCD screens. The screen is fixed to the housing with 4 screws. 1602 LCD display case features: - Transparent acrylic shell, - Includes screws, - Dimensions: 90x40x55mm. Code P0149 Last items in stock Price €1.39
SparkFun 16x2 SerLCD - Black on RGB 3.3V This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself. We have the same screen with a reverse color version, i.e. RGB on black with a reference of SP028 Code SP028 Last items in stock Regular price €27.99 -€10.00 Price €17.99
LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters It is an LCD screen with a resolution of 8x2 characters to white letters. Its operating voltage is 3.3V and is managed through its 14 solderable connections. The control of the visualization is made by the component AIP7660E0 8 pins N-FET which is a linear regulating contractor. LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters features: - Operating voltage: 3.3V- Model JMD0802B see: 2- Matrix of points: 8x2- Size of the viewing area: 38x16 mm- Linear controller controller: AIP7660E0 8 pin N-FET- Size: 58x32x13.2 mm Code P0130 Available Price €2.49
16x2 1602 LCD display Blue IIC/I2C LCD display consists of a 16-character, 2-rows. The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 and many more controllers. Code P0010 Available Price €3.49
16x2 LCD screen 1602 HD44780 Green background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. Characteristic: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, black letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code PV014 Available Regular price €3.29 -€0.50 Price €2.79
16x2 1602 LCD display HD44780 Backlit Blue background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. 16x2 1602 LCD display HD44780 Backlit Blue background features: - LCD screen , 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code P0014 Available Regular price €2.65 -€0.75 Price €1.90
LCD Display Screen 5V Blue Backlight 8x2 JMD0802B 2 White Characters It is an LCD screen with a resolution of 8x2 characters to white letters. Its operating voltage is 3.3V and is managed through its 14 solderable connections. The control of the visualization is made by the component AIP7660E0 8 pins N-FET which is a linear regulating contractor. LCD Display Screen 5V Blue Backlight 8x2 JMD0802B 2 White Characters features: - Operating voltage: 5V- Model JMD0802B see: 2- Matrix of points: 8x2- Size of the viewing area: 38x16 mm- Linear controller controller: AIP7660E0 8 pin N-FET- Size: 58x32x13.2 mm Code P0131 Available Price €2.49
20x4 2004 LCD display PCF8574T I2C Backlit Blue - It consists of a 20-character, 4-row display - The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem - Only two pins are needed for communication, SDA and SCL - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32 PCF8574 - & gt; the default address 0x20 PCF8574A - & gt; the default address 0x3F - It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 20x4 2004 LCD display PCF8574T I2C Backlit Blue features: - LCD screen, 20 characters and 4 lines - 5V power supply - HD44780 compatible controller Code P0013 ✗ Out-of-Stock Price €8.49