ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth
  • ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth
  • ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth
  • ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth
  • ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth
  • ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth
  • ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth
  • ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth

ESP32 WROOM-32 DEVKIT V1 - Board with WiFi and Bluetooth

W0103

WROOM-32 DEVKIT V1 is an ESP32 processor development board with WiFi and Bluetooth (BLE). It is much faster than the ESP8266 processor (NodeMCU and similar), and very easy to use, with 2x15 pins.

OEM
5905323233959
Add to wish list

WROOM-32 DEVKIT V1 is an ESP32 processor development board with WiFi and Bluetooth (BLE).  It is much faster than the ESP8266 processor (NodeMCU and similar), and very easy to use, with 2x15 pins.
This ESP32 development board is a module that allows you to control all types of sensors and actuators via WiFi and Bluetooth. It allows you to create projects in the world of the Internet of things "IoT" in a simple, efficient and economic way.

Characteristics:

  • Wireless connectivity:
  • -WiFi : 150.0 Mbps data speed with HT40
  • -Bluetooth: BLE (Low Energy Bluetooth) and Bluetooth Classic
  • Processor: 32-bit LX6 Dual-Core Tensilica Xtensa microprocessor, operating at 160 or 240 MHz
  • ROM: 448 KB
  • SRAM: 520 KB
  • Low power consumption : ensures that it can be used in ADC conversions, for example, during deep sleep.
  • Peripheral input/output: 
  • - Peripheral interface with DMA including capacitive touch
  • - ADC (analog to digital converter)
  • - DAC (Digital to Analogue Converter)
  • - SPI (Serial Peripheral Interface)
  • - I²S (integrated interchip sound)
  • - I²C (integrated circuit)
  • - UART (universal asynchronous receiver/transmitter)
  • - RMII (Reduced Media Independent Interface)
  • - PWM (Pulse Width Modulation)
  • Security: hardware accelerators for AES and SSL / TLS
  • Compatible with Arduino IDE: you can program ESP32 with Arduino IDE (installation instructions for Windows, Mac OS X and Linux)
  • MicroPython compatible : you can program the ESP32 with MicroPython firmware ( start with MicroPython on ESP32 )

Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:

Support for Arduino IDE: https://github.com/espressif/arduino-esp32

Data sheet

Firmware
WeMos
Módulo ESP
ESP-32

Customers who bought this product also bought

Unipolar Hall Effect Magnetic Sensor IC SH3144E

Definition of the Hall effect: When a current passes through a bar of semiconductor (or conductive) material, and if an induction magnetic field B is applied perpendicularly to the direction of current flow, a voltage, called the Hall voltage, proportional to the magnetic field, and the current appears on the side faces of the bar.
This voltage is proportional to the speed of movement of the charge carriers, It is considerably higher in semiconductor materials than in metal conductors. Magnetic Sensor Characteristic: - Input Voltage: 3.8-30VDC - Output current: 40mA
High output current capacity -40 mA maximum absolute
Quad-Hall design virtually eliminates static mechanical effects
Magnetic compensated temperature - Digital current sinking output

S0049

Regular price €0.90 -€0.25 Price €0.65

Thermal tape 20mm type Kapton

Characteristic:
- Supports up to 280ºC
- Electrical and antistatic insulation
- Resistant to acidic products and alkaline
- Solvent resistant
- Adhesive
- Length Approx: 26m

I0053

Regular price €4.85 -€1.36 Price €3.49

L298N Motor Drive Controller Board Module Dual H Bridge DC

It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
L298N Motor Drive Controller Board Module Dual H Bridge DC features:
- Minimum operating voltage: 5 V
- Maximum operating voltage: 35 V
- Maximum current: ± 2 A
- Logic voltage: 5V
- PWM signal inputs for speed control
- Outputs: for 2 DC motors or for a bipolar stepper motor
- Measures: 43x43x24 mm
Helpful Links:
Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles

M0100

Price €2.79

Arduino compatible Attiny85 Digispark board

Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter.
Similar to the Arduino line , It is one of the smallest boards on the market.
Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others.
You can use many of the same Arduino libraries and you have your own on the digispark wiki. Arduino compatible Attiny85 Digispark board features:
- USB power supply
- External power supply (7v-35v DC 12v maximum recommended)
- 5V DC 500mA regulator on board
- Programmable with the Arduino IDE
- Loaded with Micronucleus bootloader

B0002

Price €4.90
€7.49
Save €1.29 €6.20

5,12 tax excl.

Tax included 1
Last 5 items
Regular price €7.49 Price €6.20

Order until 4pm we will send today
30 days return