ESP-12F ESP8266 12F WiFi Board Module
  • ESP-12F ESP8266 12F WiFi Board Module
  • ESP-12F ESP8266 12F WiFi Board Module

ESP-12F ESP8266 12F WiFi Board Module

W0064

- WIFI module based on the ESP8266 controller
- ESP8266-12F is an improved version of ESP8266-12E
- It works as a standard WiFi 802.11 b / g / n 2.4 GHz. It is equipped with 22 outputs (pitch 2 mm) of which 11 are GPIO, ADC 1 and SPI. A LED and a PCB antenna have been incorporated
ESP-12F ESP8266 12F WiFi Board Module features:
- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP Stack.
- PLL, regulators and integrated energy management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low energy mode: <10 uA
- Integrated 32-bit processor

OEM
5905323234314
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

- WIFI module based on the ESP8266 controller
- ESP8266-12F is an improved version of ESP8266-12E
- It works as a standard WiFi 802.11 b / g / n 2.4 GHz. It is equipped with 22 outputs (pitch 2 mm) of which 11 are GPIO, ADC 1 and SPI. A LED and a PCB antenna have been incorporated

ESP-12F ESP8266 12F WiFi Board Module features:


- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP Stack.
- PLL, regulators and integrated energy management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low energy mode: <10 uA
- Integrated 32-bit processor
- Supports WPA / WPA2
- Supports Lua, AT
- Supports three operating modes: AP, STA, STA + AP
- Communication interface type: SPI, Serial, UART (115200 bps)
- Size: 24 mm x 16mm The characteristics that distinguish module ESP-12F:
- Digital I / O Pins: 11 x GPIO
- ADC Input (Analog Digital Converter)
- SPI interface

Link:

Datasheet ESP-12F

Data sheet

Módulo ESP
ESP-12F

Customers who bought this product also bought

PCA9685 digital servo motor controller 16 channel PWM

This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos.
It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity.
PCA9685 digital servo motor controller 16 channel PWM features:

- Supply voltage: 3-5 VDC,
- Maximum motor voltage: 6 VDC,
- Number of channels: 16,
- Resolution per channel: 12 bits,
- Interface: I2C,
- Working frequencies: 40-1000 Hz,
- PCB size: 62.3x25.3mm .

R0074

Price €5.10

Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V

This module equipped with a PCF8591 converter has a low current power supply and includes 8 bit CMOS data acquisition devices.
Your converter has four analog inputs, one analog output and one I2C serial bus interface.
It is supplied in the voltage range 2.5V-6V, analog voltage between the negative potential VSS and positive VDD. The control and data signals are transmitted on the two-wire I2C bi-directional bus to the transformed series.
The intensity of the ambient light can be converted into a digital signal thanks to its integrated photoresistor.
It allows access to eight PCF8591 converters on the same I2C bus without additional equipment. Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V features:
- Supply voltage (between VSS and VDD): 2.5-6VDC

M0133

Price €2.89

ProtoShield Prototype Expansion Board with Mini Breadboard 170 points for Arduino UNO V5.0

ProtoShield Prototype Expansion Board with Mini Breadboard 170 points for Arduino UNO V5.0 features:
- To mount your projects in a comfortable and orderly way, access to all the pins of Arduino Uno R3, it has a universal plate and protoboard zone, 5V and Gnd buses, reset pushbutton, pushbutton and 2 general purpose leds, zones for integrated Soic and Dip
- The seamless mini breadboard has 170 connection points.
- You can stick on the shield with its self-adhesive back.

M0016

Regular price €2.20 -€0.21 Price €1.99

Servo Micro Digital Symmetry Left 1.5g 4.8V

This left symmetry micro-digital servo is of excellent quality and very light.
Its high speed and rotational capacity is great Advantage for developing sensitive projects with quick response. Characteristic: - Symmetry of the servo: for left incorporation
- Plug: 1- red wire: positive polarity (+)
2- black wire: negative polarity (-)
3- white wire: control signal
- Model: GS-1502 - Type: Analog Servo
- Rotation angle: 180 °
- Torque:
- 0.20kg / cm if Vin = 4.8V
- 0.24kg / cm if Vin = 6V
- Speed:
- 0.11sec if Vin = 4.8V
- 0.09sec if Vin = 6V
- Operating voltage: 3.7V-5V - Material type: Nylon
- PCB size: 21x15x12 mm

F0001

Price €8.49

M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer

M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer features:
- This sensor can be configured as auto Z axis level
- Sensor detection switch inductive proximity LJ12A3-4-Z / BY
- PNP DC6-36V
- Often used for 3D printer bed leveling
- Typical application: printer bed level sensor 3D
- Cylindrical cable type DC 3 cable type (black, brown, blue)
- Inductive sensor type
- PNP NO (Normal Open)
- Detecting Distance 4mm - DC supply voltage 6-36V
- Current output 300mA
- Response frequency 0.5KHz
- Detects iron / aluminum
- Operating temperature -25 ° C at + 55 ° C (Non-freezing condition)
- Head diameter 12 mm
- Size 6.2 x 2cm
- Cable length 100cm

S0036

Regular price €3.99 -€0.50 Price €3.49
€3.09

2,55 tax excl.

Tax included 1
15 items
Price €3.09

Order until 4pm we will send today
30 days return