8 Channel 5V 10A Relay Module Arduino compatible

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

SONOFF SNZB-01 is a stylish mini wireless switch by ZigBee, via its Bridge (required). It has three control options: single press, double press and long press, so you can program routines and actions quite easily in the simplest way you need.

This 1-meter probe uses the original DS18B20 temperature sensor chip. The DS18B20 is a waterproof temperature sensor/thermometer. It is waterproof, moisture proof and rustproof with the high quality stainless steel tube encapsulated. This is a spare part or accessory used in SONOFF TH10 / TH16.

TE Connectivity's Micro K series automotive PCB relays are through-hole mounted relays.  Typical applications include: locking control circuits, seat adjustment motors, window defrosters, starter solenoid switches, in car alarms, door monitoring and closing, hazard warning signs, heated front/rear displays, immobilizers, front/rear/fog lights, interior lights, sunroofs, turn signals, window lifters and wiper control.

- Supply voltage: 12V

- Output current: 30A

- Contact configuration: SPDT

SONOFF SNZB-03 is a stylish mini wireless motion sensor via ZigBee, through its Bridge (required). Detection distance of 6m and viewing angle of 110°. Detects motion and triggers alert messages.

This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL, PLC output).
16 Channel Relay Module 12V 10A AVR features:
- Channels: 16 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 3mA
- Insulation: Yes
- Low shot: 0-2V
- LED indicator: For each channel
- Dimensions: 18x 9x 2cm

W1209 12V DC Thermostat Digital Temperature Controller Switch features:
- Model: W1209
- Supply voltage: DC 12V
- Temperature control mode: ON / OFF
- Temperature range: -50 -110 ° C
- Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C
- Measurement accuracy: 0.1 ° C
- Refresh rate: 0.5 s
- Temperature protection 0-110 ° C
- Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA
- Power of output: 10A relay
- Sensor probe: NTC waterproof sensor (10K 0.5%)
- Environmental requirements: -10 ~ 60 ° C Humidity 20% -85%
- Dimensions: 48 x 40 mm

The SONOFF ZigBee Bridge is the heart of the smart home that allows you to remotely manage a variety of ZigBee devices and sensors to monitor and control the home. Interact with all your Sonoff devices, both WiFi and ZigBee, thanks to this bridge.

This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, from the TTL 8 Channel High Trip 5V 10A Relay Module features:
- Channels: 8 (independent protected with Optocouplers)
- Supply Voltage Vcc: 5Vdc
- Output Current: 10A
- High trip min 3.3V input IN1. ..IN8
- Relay activation current: 5 ~ 10mA
- Isolation: Yes
- Indicator LED: For each channel
- Dimensions: 55x 139mm
- Weight: 120g
COM GND jumper input: connects GND optocouplers and GND of the circuit

Intelligent 5 metre LED strip by WiFi and RF, great for creating any atmosphere in any room. Change its colour and rhythm from your mobile phone or its remote control. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes.