4x4 High Quality Keyboard Matrix Push Buttons 16 Touch Keys High quality keyboard, with 16-key matrix.Ideal for your arduino projects, but can also be used with other microcontrollers. 4x4 High Quality Keyboard Matrix Push Buttons 16 Touch Keys features: - Momentary contact- Number of push buttons: 16- Dimensions: 39mm x 43mm Code M0009 Available Price €1.49
Connector Jack 2.1x5.5mm Power Supply DC Male Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Connector Jack 2.1x5.5mm Power Supply DC Male features: - Ideal for connecting without welding- It has two screws in the tip for positive and negative cable screwdriver Code K0023 Available Price €0.80
16x2 1602 LCD display Blue IIC/I2C LCD display consists of a 16-character, 2-rows. The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 and many more controllers. Code P0010 Available Price €3.49
DC voltage sensor 0-25v for Arduino Voltage Sensor Module 0.02445V ~ 25V. When the module is powered by 5V voltage detection It does not exceed 25V, and when the module is powered with 3.3V the voltage detection does not exceed 16.5V. 100% Compatible with Arduino. DC voltage sensor 0-25v for Arduino features: - Input voltage: 0-25 VDC - Voltage detection range: 0.02445V-25 VDC - Analog voltage resolution: 0.00489 V - DC input connector: cathode terminal connected to VCC, GND negative pole - Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the Arduino AD pins Code M0191 Available Price €1.59
Servos Tester Servos Tester features: - 3-Channel Tester - For Electronica Arduino Code R0029 Available Regular price €2.79 -€1.00 Price €1.79
L298N Motor Drive Controller Board Module Dual H Bridge DC It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. L298N Motor Drive Controller Board Module Dual H Bridge DC features: - Minimum operating voltage: 5 V- Maximum operating voltage: 35 V- Maximum current: ± 2 A- Logic voltage: 5V- PWM signal inputs for speed control- Outputs: for 2 DC motors or for a bipolar stepper motor- Measures: 43x43x24 mm Helpful Links: Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles Code M0100 Available Price €2.79
Female DC Power Connector Jack 2.1x5.5mm Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features: - Ideal for connecting without welding- It has two screws in the tip for positive and negative cable screwdriver Code K0050 Available Price €0.49
Protoboard Breadboard 5x7cm Protoboard Breadboard 5x7cm features: -PCB dimension: 5x7cm-Hole diameter: 1mm -Pitch: 2.54mm-Bakelite with copper fields Code PB021 Available Price €0.59
GPS Mini Station NEO-6M-0-001 with EEPROM SMA IPEX Ports It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip. The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed. Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC - Operating current: 45 mA - Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds - Navigation update: 5 Hz max. (1 Hz default) - Capture time: at the start 27s, in operation 1s - Operating temperature: -40 ° C - + 85 ° C - separate GPS antenna (not included ): 18x18 mm - Size: 22x30x13 mm Code M0070 ✗ Out-of-Stock Price €14.90
USB GPS Receiver with 2m Extension Cable (Compatible with Raspberry Pi/ LattePanda/ Jetson Nano) It is a low-power, high-sensitivity Ublox chip-based GPS receiver module that can receive 56-channel satellite signal. Compared with traditional GPS receivers, it offers much more accurate and faster positioning performance with stronger signals. Integrated with a built-in receiver antenna, this product adopts high-precision positioning chip and industrial grade manufacturing process. Code RA160 ✗ Out-of-Stock Price €17.95
SparkFun GPS Breakout This small GPS breakout is yet another Qwiic module from SparkFun as per usual based on I2C - meaning that you can keep your serial port free for other applications. The board features XA1110 GPS module from GTOP and MediaTek MT3333 chipset already loaded with SparkFun firmware enabling clean and easy use of both ports. Code SP034 Last items in stock Price €65.99
GPS Module U-BLOX NEO-7M for Arduino - VMA430 This small GPS module is an ideal module for Arduino. The NEO-7 series is characterised by the exceptional performance of the highly sensitive u-blox 7 GNSS (GPS, GLONASS, QZSS and SBAS). Code VE009 Available Price €35.90
GPS Mini Station NEO-6M-0-001 with EEPROM SMA IPEX Ports It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip. The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed. Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC - Operating current: 45 mA - Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds - Navigation update: 5 Hz max. (1 Hz default) - Capture time: at the start 27s, in operation 1s - Operating temperature: -40 ° C - + 85 ° C - separate GPS antenna (not included ): 18x18 mm - Size: 22x30x13 mm Code M0070 ✗ Out-of-Stock Price €14.90
USB GPS Receiver with 2m Extension Cable (Compatible with Raspberry Pi/ LattePanda/ Jetson Nano) It is a low-power, high-sensitivity Ublox chip-based GPS receiver module that can receive 56-channel satellite signal. Compared with traditional GPS receivers, it offers much more accurate and faster positioning performance with stronger signals. Integrated with a built-in receiver antenna, this product adopts high-precision positioning chip and industrial grade manufacturing process. Code RA160 ✗ Out-of-Stock Price €17.95
SparkFun GPS Breakout This small GPS breakout is yet another Qwiic module from SparkFun as per usual based on I2C - meaning that you can keep your serial port free for other applications. The board features XA1110 GPS module from GTOP and MediaTek MT3333 chipset already loaded with SparkFun firmware enabling clean and easy use of both ports. Code SP034 Last items in stock Price €65.99
GPS Module U-BLOX NEO-7M for Arduino - VMA430 This small GPS module is an ideal module for Arduino. The NEO-7 series is characterised by the exceptional performance of the highly sensitive u-blox 7 GNSS (GPS, GLONASS, QZSS and SBAS). Code VE009 Available Price €35.90