HC-SR04 Ultrasonic Sensor Distance Measuring Module It is very easy to make it work with an Arduino, PIC or any other microcontroller. In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle. HC-SR04 Ultrasonic Sensor Distance Measuring Module features: - Supply voltage: 5V (4.5V- 6V) - Consumption: 30 mA typical, (35 mA max) - Interface: VCC , GND, Signal - Range: 2 cm to 3 meters - Angle 15º - LED indicator of measurement in progress - Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm - Quantity: 1 unit Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry: Automatic robot operation with obstacle detection /> Code S0007 Available Price €1.79
Buzzer PCB Active 5V Black This module is an active buzzer for Arduino and emits different sounds at various frequencies. It does not accept oscillation source, it only receives square waves for drive sound. Code M0162 Available Regular price €1.29 -€0.15 Price €1.14
TTL Converter Module 5V - 3.3V Bidirectional I2C Logic Level Connecting a 3.3V device to a 5V system is a challenge.The bidirectional logic level converter is a small device that safely drops the signals from 5V to 3.3V and increases 3.3V to 5V at the same time.This level converter also works with 2.8V and 1.8V devices. What really separates this logic level converter from our previous versions is that it can successfully set its high and low voltages and go up and down between them safely on the same channel.Each level converter has the ability to convert 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The level converter is very easy to use. The board needs to be powered from the two sources of voltage (high voltage and low voltage) that your system is using. Code M0153 Available Regular price €4.99 -€2.00 Price €2.99
Power Supply Transformer 220V AC/DC 2A 12V Power Supply Transformer 220V AC/DC 2A 12V features:- Input voltage: 100~240V 50Hz- Output voltage: DC 12V- Output current: 2A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0015 Available Price €4.79
Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB features: Industrial abrasive scourer for laminated copper plate Cleaner for cleaning the laminated copper plate. Perfectly removes impurities such as oxides, sulfides and other similar establishments, as well as polished surfaces so that the copper substrate is better prepared.It is also ideal for removing the remains of enamels, lacquers and other materials used during the creation of PCB tracks. Code H0021 Available Price €0.99
Resistor 220 Ohm 5% 0,25W 1/4W Resistor 220 Ohm 5% 0,25W 1/4W features:-220 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0008 Available Price €0.08
Potentiometer B1K Linear Potentiometer B1K Linear features: -1k OHM kΩ - linear potentiometer 1k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0065 Available Price €0.99
16GB Class 10 MicroSD memory card with adapter 16GB Class 10 MicroSD memory card with adapter features: - Capacity 16GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0019 Backorder Price €4.95
Relay Module 1 Channel 5V 10A 1 Channel 5V Relay Module. This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). Relay Module 1 Channel 5V 10A features: - Channel: 1 - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - LED indicator - Dimensions: 30x 54mm Code RL005 Available Price €1.29
Lilypad LED Red LED of red color.The color option allows you to adjust the LEDs to your liking to sew clothes or anything else you can dream of.Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad LED Red features: - Operating voltage: 3 - 5 VDC- Very bright- Density of the PCB: 0.8 mm- LED color: red- Size: 5.5x12.5 mm- 1 LED included Code M0138 Last items in stock Price €0.99
SONOFF 5050RGB - LED strip light IP65 5M 5 meter LED strip easily installed for use with Sonoff controllers via WiFi and RF. Great lights to create any ambience in any room. Change their colour and rhythm from your mobile or controller. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. (Controller and adapter not included) Code WS017 Last items in stock Regular price €17.90 -€3.00 Price €14.90
Qwiic cable kit The SparkFun Qwiic Cable Kit includes 10 cables of different lengths and styles that will connect your Qwiic boards to each other, to a development platform or to a breadboard. Each Qwiic cable is colour coded red, black, blue and yellow with 1mm JST termination. Code SP098 Available Price €11.95
Intermittent buzzer with generator - active buzzer 3 to 24 VDC Buzzer alarm to convert electrical signals into intermittent acoustic signals in robotic devices and Arduino projects A buzzer with a pulsating tone generator, after connecting the supply voltage (DC) in the range of 3V -24V, the buzzer generates an intermittent signal with a frequency of approximately 1 Hz. Application example: as a reverse alarm system for a car. Code K0279 Available Price €1.49
433MHz RF Wireless Receiver + Transmitter Transmitter and receiver kit for radio control and data transmission, compatible with Arduino. 433MHz RF Wireless Receiver + Transmitter features: Specifications of the emitter module: - Power supply: 3V ~ 12V - Working intensity: max = 40mA (at 12V), min = 9mA (at 3V) - AM ASK / OOK modulation - SAW filter - Working frequency: 315MHz-433.92MHz - Transmission power: 25mW (315MHz at 12V) - Range: 20 to 200 meters (different voltages can give different results) - Transfer speed: 4 kB / S - Dimensions: 19x 19x 7mm Receiver module specifications: - Power supply: 5.0VDC + 0.5V - Work intensity: 5.5mA (at 5.0VDC) - Work frequency: 315MHz-433.92MHz - Receiver sensitivity: -100dBm Code W0010 Available Price €1.09
Double Joystick Module 2 Axis XY PS2 Ideal for your arduino projects, but can also be used with other microcontrollers. Double Joystick Module 2 Axis XY PS2 features: - Two axes (XY) - Return to the center - Central push button - Connections: + 5Vcc / GND / VRx / VRy / SW - Dimensions: 4 x 2.6 x 3.2cm Code M0010 Available Regular price €2.50 -€0.31 Price €2.19
Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth ESP32 processor development board with WiFi and Bluetooth (BLE) compatible with Arduino Uno shields. It is much faster than the ESP8266 processor (NodeMCU and the like) . Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth features: Power: 5-12VDC WiFi 802.11 b / g / n / e / i (802.11n up to 150 Mbps) Bluetooth v4.2 BR / EDR and BLE. Compatible with Arduino Uno shields. 6 Analog input. 20 digital inputs / outputs (3.3V) (with PWM functions, interrupt). UART, SPI, I2C communication. Size: 68Ã — 53 mm Micro USB connection. 4Mbytes Flash Memory 520Kb Clock: 240Mhz (a core dedicated to WiFi processing) Temperature: -40C + 85C Current: 250mA (max) Current in saving mode: 0.15mA Operating current: 20mA (without WiFi) Useful links for Arduino / Raspberry programming and projects with Arduino / Code W0094 Available Price €9.95
SIM800L GPRS GSM SIM Board Quadband SIM800L GPRS GSM SIM Board Quadband features: Package includes: - SIM800L module, - 2x pin headers, - Spring antenna, - 3G PCB antenna - 15cm cable. - Supported SIM format: Micro SIM. Code W0017 Available Price €6.49
Bus Pirate - v3.6a This little board is great for any type of prototyping - enables troubleshooting and debugging of any board with voltage from 0 to 5.5V. The board interprets the commands and sends them further via a proper protocol (ranging from UART through I2C up to HDD44780 LCD). The Pirate lets analyze as well the data sent back from the device to the computer terminal effectively allowing to decipher potential errors. The bootloader installed on the board enables the quick and easy update of firmware and changing the functionality of the board. This board features PIC24FJ64 and FT232RL USB-to-serial chip enabling swift communication over the mini-B USB port. On the other end of the board 2x5 pin header is placed with detailed descriptions of each pin. Code SP037 Last items in stock Price €39.99
Relay Module 1 Channel 5V 10A 1 Channel 5V Relay Module. This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). Relay Module 1 Channel 5V 10A features: - Channel: 1 - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - LED indicator - Dimensions: 30x 54mm Code RL005 Available Price €1.29
Lilypad LED Red LED of red color.The color option allows you to adjust the LEDs to your liking to sew clothes or anything else you can dream of.Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad LED Red features: - Operating voltage: 3 - 5 VDC- Very bright- Density of the PCB: 0.8 mm- LED color: red- Size: 5.5x12.5 mm- 1 LED included Code M0138 Last items in stock Price €0.99
SONOFF 5050RGB - LED strip light IP65 5M 5 meter LED strip easily installed for use with Sonoff controllers via WiFi and RF. Great lights to create any ambience in any room. Change their colour and rhythm from your mobile or controller. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. (Controller and adapter not included) Code WS017 Last items in stock Regular price €17.90 -€3.00 Price €14.90
Qwiic cable kit The SparkFun Qwiic Cable Kit includes 10 cables of different lengths and styles that will connect your Qwiic boards to each other, to a development platform or to a breadboard. Each Qwiic cable is colour coded red, black, blue and yellow with 1mm JST termination. Code SP098 Available Price €11.95
Intermittent buzzer with generator - active buzzer 3 to 24 VDC Buzzer alarm to convert electrical signals into intermittent acoustic signals in robotic devices and Arduino projects A buzzer with a pulsating tone generator, after connecting the supply voltage (DC) in the range of 3V -24V, the buzzer generates an intermittent signal with a frequency of approximately 1 Hz. Application example: as a reverse alarm system for a car. Code K0279 Available Price €1.49
433MHz RF Wireless Receiver + Transmitter Transmitter and receiver kit for radio control and data transmission, compatible with Arduino. 433MHz RF Wireless Receiver + Transmitter features: Specifications of the emitter module: - Power supply: 3V ~ 12V - Working intensity: max = 40mA (at 12V), min = 9mA (at 3V) - AM ASK / OOK modulation - SAW filter - Working frequency: 315MHz-433.92MHz - Transmission power: 25mW (315MHz at 12V) - Range: 20 to 200 meters (different voltages can give different results) - Transfer speed: 4 kB / S - Dimensions: 19x 19x 7mm Receiver module specifications: - Power supply: 5.0VDC + 0.5V - Work intensity: 5.5mA (at 5.0VDC) - Work frequency: 315MHz-433.92MHz - Receiver sensitivity: -100dBm Code W0010 Available Price €1.09
Double Joystick Module 2 Axis XY PS2 Ideal for your arduino projects, but can also be used with other microcontrollers. Double Joystick Module 2 Axis XY PS2 features: - Two axes (XY) - Return to the center - Central push button - Connections: + 5Vcc / GND / VRx / VRy / SW - Dimensions: 4 x 2.6 x 3.2cm Code M0010 Available Regular price €2.50 -€0.31 Price €2.19
Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth ESP32 processor development board with WiFi and Bluetooth (BLE) compatible with Arduino Uno shields. It is much faster than the ESP8266 processor (NodeMCU and the like) . Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth features: Power: 5-12VDC WiFi 802.11 b / g / n / e / i (802.11n up to 150 Mbps) Bluetooth v4.2 BR / EDR and BLE. Compatible with Arduino Uno shields. 6 Analog input. 20 digital inputs / outputs (3.3V) (with PWM functions, interrupt). UART, SPI, I2C communication. Size: 68Ã — 53 mm Micro USB connection. 4Mbytes Flash Memory 520Kb Clock: 240Mhz (a core dedicated to WiFi processing) Temperature: -40C + 85C Current: 250mA (max) Current in saving mode: 0.15mA Operating current: 20mA (without WiFi) Useful links for Arduino / Raspberry programming and projects with Arduino / Code W0094 Available Price €9.95
SIM800L GPRS GSM SIM Board Quadband SIM800L GPRS GSM SIM Board Quadband features: Package includes: - SIM800L module, - 2x pin headers, - Spring antenna, - 3G PCB antenna - 15cm cable. - Supported SIM format: Micro SIM. Code W0017 Available Price €6.49
Bus Pirate - v3.6a This little board is great for any type of prototyping - enables troubleshooting and debugging of any board with voltage from 0 to 5.5V. The board interprets the commands and sends them further via a proper protocol (ranging from UART through I2C up to HDD44780 LCD). The Pirate lets analyze as well the data sent back from the device to the computer terminal effectively allowing to decipher potential errors. The bootloader installed on the board enables the quick and easy update of firmware and changing the functionality of the board. This board features PIC24FJ64 and FT232RL USB-to-serial chip enabling swift communication over the mini-B USB port. On the other end of the board 2x5 pin header is placed with detailed descriptions of each pin. Code SP037 Last items in stock Price €39.99