Resistor 10K Ohm 5% 0,25W 1/4W Resistor 10K Ohm 5% 0,25W 1/4W features:-10K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0021 Available Price €0.08
STEAM kit - Keyes Sensor Learning Starter Kit for BBC micro:bit Keyes 37 sensor kit is a great extension set for your Micro:Bit. Using Sensor shield for Micro:Bit you can connect all modules included in the pack only by the connectors without soldering or wiring any parts. Now you can concentrate only on programming with your big Mirco:Bit. Code B0128 Available Regular price €75.95 -€6.00 Price €69.95
Inlet Module Plug Fuse Switch 220V C14 3D Printer Inlet Module Plug Fuse Switch 220V C14 3D Printer features: - Voltage and current of 10A, 250V AC- Plug type - 3 pins IEC320 C14- Color of the red switch- Diameter holes 40 mm- Distance between holes 39mm- Size 47 x 27 mm- Total size of 58 x 50 x 34 mm Code K0022 Available Regular price €4.79 -€1.20 Price €3.59
Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features: - 3D Printer Extruder - 0.4mm Nozzle - 100k 3950 NTC thermistor with cable - MK8 heater block with 12v / 40W thermal ceramic resistance with cable - 1.75mm filament stud M6x30mm Code I0102 Available Price €5.49
16x2 1602 LCD display Blue IIC/I2C LCD display consists of a 16-character, 2-rows. The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 and many more controllers. Code P0010 Available Price €3.49
10x Photoresistor GL5539 LDR 50k - 100k Photoresistance is a resistor whose resistance decreases as the intensity of the light that falls on it increases. 10x Photoresistor GL5539 LDR 50k - 100k features:- Model: GL5539- Spectral peak: 540nm- Maximum DC voltage: 150V- Maximum power: 100mW- Resistance with light (10lux): 50-100KΩ- Resistance with darkness (0lux): 5MΩ- Response time: 20ms- Operating temperature: -30ºC - 70ºC Code S0013 Available Price €0.15
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €4.50
Sensor SCT-013-030, Non-Invasive 30A AC Current Meter The sensor measures the current flowing in the cable without cutting it. The measurement is made on a single insulated wire, the output is an analog voltage from 0 to 1 V. Sensor SCT-013-030, Non-Invasive 30A AC Current Meter features: Input current: 0 to 30A AC Output voltage: 0 to 1 V AC Built-in load resistance: 62 Ω Winding ratio: 1800: 1 Operating temperature range: -25 ° C to 70 ° C Cable length: 1 m Sensor weight: approximately 45 g Sensor SCT013-030 datasheet Code M0203 Available Price €6.49
Interactive Coding Accessory Pack The six+ cool projects in this kit will give children new insights into artificial intelligence while they are entertained. Note: the micro:bit board is not included, you can buy it separately. Code EL0113 Last items in stock Price €37.90
Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 ✗ Out-of-Stock Price €4.50
2x AAA 3V battery holder for Micro:bit Weight: 12.7g Box size: 62 * 25 * 10 mm Code PP037 Available Price €1.99
GamePad for micro:bit (V4.0) GamePad for micro:bit V4.0 adopts a high-precision three-axis analog quantity joystick. The combination of joystick and gamepad allows you to control the direction and speed of Maqueen at the same time. In addition, there are 7 programmable buttons, which means you can explore more interesting functions and more flexible controls. In the latest V4.0 product, we have placed the external battery box on the PCB, which is more convenient to use. Code DF009 ✗ Out-of-Stock Price €24.95
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €23.95
Construction kit 32 IN 1 micro:bit - Wonder Building kit With this 32 in 1 construction kit you can build all 32 options or develop your imagination by building your own project. Note: the micro:bit board is not included, you can buy it separately. Code EL0112 ✗ Out-of-Stock Regular price €94.95 -€5.00 Price €89.95
Micro:Bit shield Functional IObit v2.0 expansion card IObit v2.0 Expansion board for the micro:bit minicomputer. It allows the connection to all the connectors of the minicomputer through pins.There is also a buzzer on the board. On the back of the module there is a description of the connectors. Code RA044 Available Price €9.99
Keyestudio Microbit Starter Smart Home Kit This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit does not include the micro:bit board. Code RA170 Available Regular price €82.99 -€17.00 Price €65.99
Micro:bit gold finger adapter Size: 57.0mm * 23.6mm Weight: 9.8g Code RA041 ✗ Out-of-Stock Price €5.75
Micro:bit IOBit Expansion board V1.0 IOBIT expansion board for the micro:bit minicomputer. Allows connection to all minicomputer outputs via a pin strip. Code RA135 Available Regular price €6.99 -€1.50 Price €5.49
GamePad for micro:bit (V4.0) GamePad for micro:bit V4.0 adopts a high-precision three-axis analog quantity joystick. The combination of joystick and gamepad allows you to control the direction and speed of Maqueen at the same time. In addition, there are 7 programmable buttons, which means you can explore more interesting functions and more flexible controls. In the latest V4.0 product, we have placed the external battery box on the PCB, which is more convenient to use. Code DF009 ✗ Out-of-Stock Price €24.95
Keyestudio Microbit Starter Smart Home Kit with micro:bit board This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit includes the micro:bit board. Code RA168 Available Regular price €103.49 -€18.50 Price €84.99
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €23.95
Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 ✗ Out-of-Stock Price €4.50
Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96
ELECFREAKS BitBoard Kit Turn everything into a "keyboard" thanks to the Bitboard. Code EL0117 Available Regular price €35.90 -€6.00 Price €29.90
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA138 Available Price €4.50
Keyestudio Shield Sensors V2 micro:bit Keyestudio Shield expansion board for the micro:bit. Allows connection to all outputs of the minicomputer via pin strip. Shield v2.0 for micro:bit incorporates 44-pin connectors to facilitate the connection of the various sensors to the minicomputer. Code RA165 Available Price €9.45
Robot Maqueen Lite - Forklift Let´s equip Maqueen with this mechanical forklift kit so he can simulate the movement of a forklift. Program it to lift an object, fork and transfer items, just like a real forklift in a factory. Compatible with Maqueen Lite and Maqueen Plus. This play and learn kit comes with a wealth of mechanical knowledge, which will allow students to benefit greatly from hands-on practice. Come and find the most fun and interesting ways to play with Maqueen in this kit. Code DF008 Available Price €21.90
Joystick Breakout Board for BBC Micro:Bit The joystick board can be used to simulate the mouse keyboard. The 3V, G, P0 and P1 are connected to a card micro: bit to imitate the serial port. This board consists of 6 buttons and joystick. Connect the joystick and buttons to the micro: bit pins. Code RA040 Available Price €9.95