Keyboard Shield 16x2 LCD screen for Arduino It is made up of a 16-character, 2-row, 6-button display. The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library. Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features: > - 2x16 LCD with blue backlight and white characters - Potentiometer to modify the LCD contrast - 5-push-button keyboard + RESET - Use of the minimum possible channels - Full compatibility with Arduino UNO and Mega - The display is compatible with the HD44780 controller - Response time: 30 ms - Size: 80 x 60 x 22 mm Code P0020 Available Price €4.49
Resistor 1K Ohm 5% 0,25W 1/4W Resistor 1K Ohm 5% 0,25W 1/4W features:-1K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0013 Available Price €0.08
Infrared Receiver VS 1838 38kHz Ideal for projects with ARDUINO, PIC, AVR, Raspberry The infrared receiver receives the signal of 38kHz for remote control Code W0042 Available Price €0.65
Buzzer 5V Active Buzzer 4 to 7V DC Buzzer alarm to convert electrical to acoustic signals in robotics devices and Arduino projects. Buzzer 5V Active Buzzer 4 to 7V DC features: - Input voltage: 4V to 7V - Diameter: 12mm - Height: 9.5mm - Spacing Pins: 7.6mm - Maximum Current: Code M0007 Available Price €0.45
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €23.95
ATmega2560 R3 REV3 16U2 Mega2560 module with USB cable It has an Atmega2560 chip running at 16Mhz with a factory loaded bootloader with 54 digital input / output pins (from which 14 can be used as PWM outputs) and 16 analog inputs, 4 UART (hardware serial ports). The board includes a USB connector, an ICSP port, a reset button and some status LEDs. Atmega16U2 programmed as a USB-to-serial converter. Simply connect it to a computer with a USB cable or power with a power adapter and DC connector. Code B0003 Available Price €24.90
Pro Mini 16MHZ 5V Arduino compatible board - Bootloader Pin Header Compatible 100% ARDUINO - Pro Mini Atmega328P 5v 16Mhz - Miniaturized compatible version of Arduino Pro Mini - It has an Atmega328P chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can only solder the pins that we need Characteristic: - ATmega328P 16MHz chip with external quartz crystal - Auto-reset - micro switch - Integrated 5V regulator - FLASH 32kB memory - SRAM 1kB memory - EEPROM 1Kb memory - Analog input A0-A7 - 8 PWM channels - External interruption - TWI / I2C, UART, SPI interfaces - Power and status LEDs - Dimensions: 18x33mm - Weight: 30 grams Useful links for Arduino /> Code B0019 Last items in stock Price €8.95
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
Smart Science IoT Kit : micro:bit climate sensor kit for IoT learning ELECFREAKS Smart Science IoT Kit is developed on the basis of loT:Bit, a new breakout board compatible with ultrasonic sensor, dust sensor, light sensor and water level sensor, including RTC Timing and WIFI module. It can build the scene such as air quality monitoring, environmental noise detection, environmental quality monitoring station, automatic watering detection, self-defence monitoring station and more. Code EL0109 Last items in stock Price €73.90
Ring:bit 6 IN 1 Pack : Bricks pack - building and coding kit for micro:bit Six cases of fun in one kit: kids can build 6 shapes, including traffic lights, brick car, temperature-controlled fans, smart desk lamp, windscreen wiper and trebuchet. Building with this kit is just as easy as building with Lego. Note: the micro:bit board is not included, you can buy it separately. Code EL0104 Backorder Price €58.90
BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit v2.2 for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0120 Available Regular price €20.95 -€1.00 Price €19.95
Keyestudio Microbit Starter Smart Home Kit with micro:bit board This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit includes the micro:bit board. Code RA168 Available Regular price €103.49 -€18.50 Price €84.99
Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96
Micro:bit gold finger adapter Size: 57.0mm * 23.6mm Weight: 9.8g Code RA041 ✗ Out-of-Stock Price €5.75
Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 Last items in stock Price €95.95
Smart City Kit micro:bit With the Smart City Kit you will learn more about the IoT, the software, and the possibilities of future city scenes that are able to be built through it. You will be able to build topics such as smart parking, transport network, river level monitoring... Code EL0115 ✗ Out-of-Stock Price €59.80
DFRobot Maqueen Lite-micro:bit The micro:bit Maqueen educational programming robot platform is a simple to use programming robot for STEAM education, which inherits the playability and easily understandable operation of micro:bit. With a mini body, for play and tinkering, it allows students to quickly learn graphical programming in an entertaining way, while nurturing their interests in science and logical thinking. Code DF002 Available Regular price €49.95 -€2.90 Price €47.05
USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Regular price €26.50 -€2.00 Price €24.50
Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 ✗ Out-of-Stock Price €4.50
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 Last items in stock Price €4.50
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €4.50
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA138 Available Price €4.50
Construction kit 32 IN 1 micro:bit - Wonder Building kit With this 32 in 1 construction kit you can build all 32 options or develop your imagination by building your own project. Note: the micro:bit board is not included, you can buy it separately. Code EL0112 ✗ Out-of-Stock Regular price €94.95 -€5.00 Price €89.95
Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 ✗ Out-of-Stock Price €4.50
KittenBot Silicone Kitty Case yellow for micro:bit Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Code RA176 Available Price €4.90
Kit Beetle - Robot Maqueen The Maqueen Mechanic-Beetle kit includes a metal servo, mechanical parts, screws and more. With a simple installation, your Maqueen car is ready to go. Use this kit to turn your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! This play and learn kit comes with a wealth of mechanical knowledge. Come and find the most fun and interesting ways to play with Maqueen in this kit. Code DF006 Last items in stock Price €14.89
Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99
Blue silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5.5 cm * 6.5 cm Material: gel silica (environmental protection material) Code RA045 ✗ Out-of-Stock Price €5.00
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 Last items in stock Price €4.50
Gravity: Analog pH Sensor/Meter Kit V2 DFRobot Gravity: The V2 analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity. Code DF003 Last items in stock Price €57.80
Micro:Bit shield Functional IObit v2.0 expansion card IObit v2.0 Expansion board for the micro:bit minicomputer. It allows the connection to all the connectors of the minicomputer through pins.There is also a buzzer on the board. On the back of the module there is a description of the connectors. Code RA044 Available Price €9.99
Gravity: Analog pH Sensor/Meter Kit DFRobot Gravity (SEN0161): The analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity. Code DF024 Last items in stock Price €45.90