USB Cable A to Micro USB B 150cm for Arduino Leonardo, Due USB Cable A to Micro USB B 150cm Arduino Leonardo, Due features: - Color:black- Length: 150cm Code K0205 Available Price €2.14
Embellisher Button Red White Yellow Orange Potentiometer Knob for Arduino Embellisher features:- Color black and red, white, yellow, orange- Upper diameter: 0.9 cm- Lower diameter: 1.5 cm- Height: 1.6 cm- Inside hole diameter: 0.6 cm Code K0061 Available Price €0.57
NEC IR Remote Control Infrared emitter HX1838 Arduino Raspberry Remote Control HX1838 Infrared Emitter NEC IR Remote Control Infrared emitter HX1838 features: - 21 keys - Measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with UNO module - Lighting a red 3mm LED by Infrared Realization of a manageable Infrared robot - Wiring the IR Distance remote control + Infrared IR Receiver VS1838 with the UNO module - Fix the IR Distance remote control + VS1838 Infrared IR Receiver in a Mini 2WD DIY Car Robot Kit Code W0020 Available Price €0.81
DHT11 Module Temperature and Humidity Sensor The DHT11 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement. Characteristic: - Operating voltage: 3 to 5 VDC - Humidity measurement range: 20-95% ± 5% accuracy - Temperature measurement range: 0ºC to 50ºC ± 2º accuracy - Maximum sampling rate: 2 seconds - Working current 2.5mA - 1-wire interface - Dimensions: 32 x14 mm - Quantity: 1 unit with 3x female / female cables Code S0001 Available Price €2.47
Passive Buzzer 5V The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. 2x Passive Buzzer 5V features: - Input voltage: 3V to 12V - Diameter: 12mm - Height: 7.5mm - Pin spacing: 6.5mm - Impedance: 16 Ohm - Working frequency: 2 to 5 KHz - Quantity: 1 unit Code M0011 Available Price €0.32
50cm HDMI V1.3 Male to Raspberry PI 1080P Gold Silver 50cm HDMI V1.3 Male to Raspberry PI 1080P Gold Silver features: - For Raspberry Pi 2 and Pi 3, B and B + - HDMI V1.3b cable and full 1080P (category 2) resolution - Type A male at both ends - High quality gold shielded connectors - Manufactured with high quality copper conductors (OFC-Oxygen Free Copper- 99.99%) that guarantees the highest transmission quality - Refresh rates up to 120Hz - Length: 50cm - Quantity: 1 unit Code RA009 Available Price €1.40
Protoboard Breadboard 9x15cm Protoboard Breadboard 9x15cm features: -PCB dimension: 9x15cm-Hole diameter: 1mm -Pitch: 2.54mm-Bakelite with copper fields Code PB016 Backorder Price €0.62
Infrared Receiver VS 1838 38kHz Ideal for projects with ARDUINO, PIC, AVR, Raspberry The infrared receiver receives the signal of 38kHz for remote control Code W0042 Available Price €0.54
16GB Class 10 MicroSD memory card with adapter 16GB Class 10 MicroSD memory card with adapter features: - Capacity 16GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0019 Backorder Price €4.09
OTG Reader USB 2.0 USB 2.0 USB-A and microUSB card reader/writer Black Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and laptop. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a pen drive. Code K0329 Available Price €2.39
OTG Card Reader/Writer microSD USB-A 2.0 Green OTG micro-SD multifunctional card reader adapter with USB 2.0 type A connectors. Allows you to transfer data from the card to your computer. Supports microSD/T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a Pen Drive. Code K0270 Available Price €1.64
Pendrive USB 32GB GoodRam UME2-0320W0R11 USB 2.0 White A GOODRAM branded memory stick with a convex anti-slip design for easy opening of the USB in any situation. The UME2 memory stick is characterised by the USB 2.0 standard ensuring data transfer speeds of up to 20 MB/s and a unique, classic design. Code V0026 Available Price €4.95
256GB Class 10 MicroSD memory card with adapter 256GB Class 10 MicroSD memory card with adapter features: - Capacity 256GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0023 Available Price €29.67
Kingston Class 10 MicroSD 8GB Memory Card Kingston Class 10 MicroSD 8GB Memory Card features: - SDHC Class 10 UHS-I (SDC10G2 / 8GBSP) for Raspberry - Capacity: 8Gb - Class: 10 - MicroSD dimensions 11mm x 15mm x 1mm - FAT32 format - Service temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3V Code V0010 ✗ Out-of-Stock Price €5.74
Card reader USB 3.0 microSD (black) Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and notebook computer. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a Pen Drive. Code K0331 Available Price €3.22
Card reader USB 3.0 microSD (white) Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and notebook computer. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a Pen Drive. Code K0330 Available Price €3.22
Toshiba Class 10 MicroSD 16GB Memory Card with adapter Read speed: up to 100 MB / s 5 years warranty Shock resistant Waterproof Use with cameras, mobile phones Toshiba Class 10 MicroSD 16GB Memory Card with adapter features: - Capacity 16GB - Class 10 UHS-1 U1 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 Code V0016 ✗ Out-of-Stock Price €6.53
Kingston Class 4 16GB MicroSD Memory Card Kingston Class 4 16GB MicroSD Memory Card features: - Capacity 16GB - Class 4 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 V Code V0001 ✗ Out-of-Stock Price €7.85
16GB Class 10 MicroSD memory card with adapter 16GB Class 10 MicroSD memory card with adapter features: - Capacity 16GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0019 Backorder Price €4.09
OTG Reader USB 2.0 USB 2.0 USB-A and microUSB card reader/writer Black Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and laptop. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a pen drive. Code K0329 Available Price €2.39
OTG Card Reader/Writer microSD USB-A 2.0 Green OTG micro-SD multifunctional card reader adapter with USB 2.0 type A connectors. Allows you to transfer data from the card to your computer. Supports microSD/T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a Pen Drive. Code K0270 Available Price €1.64
Pendrive USB 32GB GoodRam UME2-0320W0R11 USB 2.0 White A GOODRAM branded memory stick with a convex anti-slip design for easy opening of the USB in any situation. The UME2 memory stick is characterised by the USB 2.0 standard ensuring data transfer speeds of up to 20 MB/s and a unique, classic design. Code V0026 Available Price €4.95
256GB Class 10 MicroSD memory card with adapter 256GB Class 10 MicroSD memory card with adapter features: - Capacity 256GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0023 Available Price €29.67
Kingston Class 10 MicroSD 8GB Memory Card Kingston Class 10 MicroSD 8GB Memory Card features: - SDHC Class 10 UHS-I (SDC10G2 / 8GBSP) for Raspberry - Capacity: 8Gb - Class: 10 - MicroSD dimensions 11mm x 15mm x 1mm - FAT32 format - Service temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3V Code V0010 ✗ Out-of-Stock Price €5.74
Card reader USB 3.0 microSD (black) Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and notebook computer. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a Pen Drive. Code K0331 Available Price €3.22
Card reader USB 3.0 microSD (white) Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and notebook computer. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a Pen Drive. Code K0330 Available Price €3.22
Toshiba Class 10 MicroSD 16GB Memory Card with adapter Read speed: up to 100 MB / s 5 years warranty Shock resistant Waterproof Use with cameras, mobile phones Toshiba Class 10 MicroSD 16GB Memory Card with adapter features: - Capacity 16GB - Class 10 UHS-1 U1 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 Code V0016 ✗ Out-of-Stock Price €6.53
Kingston Class 4 16GB MicroSD Memory Card Kingston Class 4 16GB MicroSD Memory Card features: - Capacity 16GB - Class 4 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 V Code V0001 ✗ Out-of-Stock Price €7.85