Support for 30mm Fan E3D V6 3D Printer
  • Support for 30mm Fan E3D V6 3D Printer

Support for 30mm Fan E3D V6 3D Printer

I0047

Support for 30mm Fan E3D V6 3D Printer features:
- Support for 30mm fan
- Compatible with E3D V6
- For hotels with 22mm diameter
- E3D V6 Cooling Fan Cover 3D Printer
- Unique design surrounded, close contact with the radiator, gather wind around the radiator so that the heating block can work normally

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Support for 30mm Fan E3D V6 3D Printer features:

- Support for 30mm fan
- Compatible with E3D V6
- For hotels with 22mm diameter
- E3D V6 Cooling Fan Cover 3D Printer
- Unique design surrounded, close contact with the radiator, gather wind around the radiator so that the heating block can work normally

Customers who bought this product also bought

USB Digital Power Voltmeter Tester Amps

Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets ...
USB Digital Power Voltmeter Tester Amps features:
- Operating range: voltage 3.5 - 9V
- Current 0 -3A
- Resolution: 10mV 1mA
- Error: <± 1.5%
- Dimensions: 60 x 23 x 19mm

K0083

Price €5.95

Digital Compass Magnetometer GY-271 5883

Compass is based on a QMC5883L system, which allows you to specify the direction of the earth's magnetic field. Digital Compass Magnetometer GY-271  features:

  • 3.3V - 6V power supply voltage
  • Current consumption of 100μA (standby 2uA)
  • I2C interface
  • Transmission speed 400kHz
  • Sensitivity 230-1370 LSB / Gs
  • Resolution 0.73-4.35mGs
  • Frequency of 75Hz
  • Measurement of the magnetic field in three axes of ± 8 Gauss with a resolution of 5 gauss miles
  • Interruption DRDY pin
  • Dimensions of 14 mm x 14 mm

M0061

Price €3.32

XL4015 DC Voltage Converter 5A 75W Step Down Regulator DC LM2596

Descripción:
Chip XL4015 - Upgrade of the LM2596
Drop module
Use a multimeter to check the output voltage and adjust the potentiometer
Voltage control
XL4015 DC Voltage Converter 5A 75W Step Down Regulator DC LM2596 features:
- Input voltage: 4.5V-38V
- Output voltage: 1.25-36.5V
- Current output: 4.5A (max 5A)
- Output power: 75W maximum
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 180KHz
- Efficiency conversion: up to 96%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 62mm x 38mm x 15mm
Principal functions:
- Step-down converter with overcurrent protection
- Li-Po battery charger, Li-Ion

A0012

Price €4.95

Pulley GT2 16 Teeth 6mm Aluminium Pulley 3D Printer Reprap

Pulley GT2 16 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 16
- Pitch: 2mm
- Material: aluminum alloy
- Outside diameter: 13mm
- Inner hole: 5mm
- Use with strap: 6mm
- Quantity: 1 unit of 16 teeth GT2 pulley, 6mm wide and 2 studs
- Ideal for fix on the axis of the motors of your 3D printer

I0004

Price €1.94

Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down

Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down features:
- Based on the MP1584EN regulator
- Output Voltage: 1.6V - 26V DC (adjustable)
- Input Voltage: 4.5V - 28V DC
- Max. Output Current: 3A (with heat sink)
- Frequency: 1MHz
- Conversion Efficiency (1A): 94%
- Short circuit protection
- Protection against overheating
- Operating temperature: -40ºC to + 85ºC
- Measures 22 x 17 x 4 mm

A0007

Price €1.95

Logging Recorder Data Logger Module Shield UNO Mega SD Card

It allows to save the record of any data.
It has a real time clock RTC, with battery included, so you can keep the date and time over the years and an SD notes reader, which accepts the format FAT16 and FAT32 to record your data. Logging Recorder Data Logger Module Shield UNO Mega SD Card features:
- Arduino data logging shield
- Data recording module to the FAT16 / FAT32 SD card
- Real time with RTC battery.
- SD card interface compatible with the FAT16 / FAT32 format
- Transmitter circuit level 3.3V.
- Compatible with Arduino UNO, Leonardo, ADK / Mega R3 or higher

M0022

Price €7.90
€1.42

1,17 tax excl.

Tax included
Price €1.42

Order until 4pm we will send today
30 days return