LED Lighting Chain WS2811 Pixels Digital Addressable RGB 50LED 5V IP68
  • LED Lighting Chain WS2811 Pixels Digital Addressable RGB 50LED 5V IP68
  • LED Lighting Chain WS2811 Pixels Digital Addressable RGB 50LED 5V IP68
  • LED Lighting Chain WS2811 Pixels Digital Addressable RGB 50LED 5V IP68

LED Lighting Chain WS2811 Pixels Digital Addressable RGB 50LED 5V IP68

P0164

This chain has DC5V LEDs that have built-in logic, so it is possible to vary the colour of each LED individually.

WS2811 includes a built-in integrated inside each LED, which allows access to each pixel individually. Black background

Easy programming with Arduino, ESP32, ESP8266, etc. 

OEM
Add to wish list

Description of WS2811 RGB LED Chain WS2811 50LED/m IP68 :

WS2811 are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually.

WS2811 includes an integrated inside each LED, which allows access to each pixel individually.

For this reason these LEDs are called individually indexable.

NOTE: These are not ordinary RGB diodes. The string requires a driver adapted to control diodes with WS2811 chipset, e.g. T-1000S.

Easy programming with Arduino, ESP32, ESP8266, etc.

Features of WS2811 RGB LED Chain WS2811:

  • Supply voltage: 5V DC
  • Power: max. 0.3 W per unit.
  • Control chipset: WS2811
  • Diameter of light-emitting diode tip: approx. 8 mm
  • Diameter of the diode housing with electronics: approx. 12 mm
  • Length of cable between the diodes: 7.5 - 7.8 cm
  • Total length of the chain: approx. 3.8 m
  • Degree of protection: IP68

The chain is terminated with a 3-pin plug on one side and a 3-pin socket on the other, allowing several chains + additional power cables to be connected.

Applications:

Use this LED strip in a multitude of fields: to make led display, led wall, advertising board, hotels, KTV, bars, advertising company, decoration company, city lighting project, entertainment and leisure place lighting.

Customers who bought this product also bought

Battery LIPO 2800mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2800mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2800 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 78 mm -Width / diameter of the battery- 100 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

PP042

Price €11.59

MPU-6050 Accelerometer Module + Gyroscope 3

Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32. MPU-6050 Accelerometer Module + Gyroscope 3 features:
- Chip: MPU-6050
- Power supply: 3V-5V
- Operating current: 5mA
- Communication: I2C
- 16-bit analog-digital converter on all axes
- Gyroscope scales: ± 250, ± 500, ± 1000 and ± 2000 ° / sec (dps) (programmable by the user)
- Accelerometer scales: ± 2g, ± 4g, ± 8g and ± 16g (programmable by the user)
- Dimensions: 14 x 21 x 1.3mm
- Quantity: 1 unit (1 strip of 8 pin + 1 strip of 8 layered pin)

M0017

Price €4.29

Arduino compatible Mega2560 R3 CH340 board

Version compatible with Arduino Mega2560 R3
It has an Atmega2560 chip running at 16Mhz with a factory-loaded bootloader
With 54 digital input / output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UART (hardware serial ports)
The board includes a USB connector, an ICSP port , a reset button and some status LEDs
Arduino compatible Mega2560 R3 CH340 board features:

- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Digital I / O Pins: 54 (14 PWM outputs)
- Analog input pins 16
- DC current per I / O Pin 40 mA
- DC Current per Pin 3.3V 50 mA
- Flash: 256 KB of which 8 KB are used by the bootloader
- SRAM: 8 KB
- EEPROM: 4 KB - Clock speed 16 MHz

B0015

Price €25.90

Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth

ESP32 processor development board with WiFi and Bluetooth (BLE) compatible with Arduino Uno shields. It is much faster than the ESP8266 processor (NodeMCU and the like) . Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth features:
Power: 5-12VDC WiFi 802.11 b / g / n / e / i (802.11n up to 150 Mbps) Bluetooth v4.2 BR / EDR and BLE. Compatible with Arduino Uno shields. 6 Analog input. 20 digital inputs / outputs (3.3V) (with PWM functions, interrupt). UART, SPI, I2C communication. Size: 68Ã — 53 mm Micro USB connection. 4Mbytes Flash Memory 520Kb Clock: 240Mhz (a core dedicated to WiFi processing) Temperature: -40C + 85C Current: 250mA (max) Current in saving mode: 0.15mA Operating current: 20mA (without WiFi) Useful links for Arduino / Raspberry programming and projects with Arduino /

W0094

Price €9.95

Raspberry Pi v2 Oficial Camera - Sony IMX219 8 Megapixel Sensor

HD V2 Raspberry Pi camera board The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video.
Uses Sony's IMX219PQ image sensor that offers high-speed, high-speed video images Sensitivity.
Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection.
Raspberry Pi Camera Board, Sony IMX219 8 Megapixel Sensor features:
High-quality images
High data capacity
Fixed 8 megapixel focus (includes focus adjustment tool)
Compatible with 1080p, 720p60 and VGA90
Sony IMX219PQ CMOS image sensor
15-pin ribbon cable

RA053

Price €29.89
€15.95
Save 15% €13.56

11,20 tax excl.

Tax included 1
Last 4 items
Regular price €15.95 Price €13.56

Order until 4pm we will send today
30 days return