Logic Analyzer 8-Channel 24MHz USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).It allows you to record and display digital data read on the computer.Logic Analyzer 8-Channel 24MHz features:- 8 channels- 24MHz sampling frequency- 1000M samples- USB power- USB 2.0 HiSpeed- 5V supply voltage- LED - power indicator- LED - logic indicator 0-1 on channel 1- USB connectionYou can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V. Code K0080 Available Price €8.49
Hantek CC-65 BNC Clamp (65A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0240 Available Regular price €91.90 -€2.00 Price €89.90
Distance Meter REBEL RB-0015 Laser distance meter with a range of 18 metres. Additional functions of this rangefinder are a spirit level, measure surface area and measure volume. Code H0307 Last items in stock Regular price €14.50 -€2.00 Price €12.50
Hantek CC-650 BNC Clamp (650A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0241 Available Price €107.90
Hantek 365A - Virtual Multimeter for PC and iPad, Datalogger and Recorder Virtual multimeter for PC, it replaces a conventional multimeter and also performs functions of autonomous datalogger and recorder. Characteristic: - Continuous measurement and recording of values of voltages, currents, resistances, capacity, etc., in real time and with creation of graphs and curves, - Electrical insulation, - Compatible with Windows 2000, Windows 7, Windows XP, Win8 / 10 - Plug & play connection via USB, - Simple and intuitive software. Measurements and tolerances: Code K0174 Last items in stock Price €98.90
Power Level KA2284 Indicator Module 5 LED The voltage / power / battery level indicator KA2284 contains five LED lights that light up progressively as the voltage increases, from green to red to yellow.It is ideal for your projects that require voltage level indicators, such as battery capacity and audio level indicators.The built-in potentiometer adjusts the range (sensitivity) of the LED display, and the DC or AC input can be selected via the P2 bridge.The AC and DC input can be controlled with bridge P2: bypassed for DC, open for AC.Adjustable power level through the potentiometer. Power Level KA2284 Indicator Module 5 LED features: - Operating voltage: 3.5 - 12 VDC- 5 level LED KA2284 controller- Adjustable power- 4 pin terminal: - IN: Input voltage to measure Code M0158 Available Regular price €3.59 -€0.90 Price €2.69
Digital Multimeter Uni-T UT33D+ The new LCD display design provides a clearer screen and a better user experience. The UT33 + series improves product safety standards, ensuring that users can work safely in the CAT II 600V environment. Code H0191 ✗ Out-of-Stock Price €15.99
Power supply 30V 5A Zhaoxin RXN-305D Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0156 ✗ Out-of-Stock Price €69.00
Digital Multimeter UT890d+ Ammeter Voltmeter NCV True RMS Line wire test Digital Multimeter 890c + Ammeter Voltmeter AC DC Ohm C Buzzer features: - Uni-T M890C + Digital Multimeter LCD AC DC Voltmeter Ammeter- Power supply: 9V battery- Protection: F 250mA / 250V- Display: LCD, range up to 1999 update: 2-3/s- Method: double A / C slope- Indication of exceeding the range: on the screen only by the number "1"- Polarization of traffic for negative visualization "-"- Operating temperature: 0 °C ~ 40 °C (32 °F ~ 104 °F)- Storage temperature: -10 °C ~ 50 °C (10 °F ~ 122 °F)- Flat battery signal: the screen shows "BAT"- Dimensions: 170x87x35 mm- Weight: 215g- Sound traffic: YES (piezo) Specifications: - DCV: 200m-2-20-200-1000V ± 0.5%- ACV: 2-20-200-750V ± 1.0% Code H0332 ✗ Out-of-Stock Price €37.50
HanteK PP-150 / 5MHz-100MHz - Oscilloscope clamp test probe kit - 10:1 and 1:1 attenuation ratio Test probe for oscilloscope, kit with all the material as spare part or additional cable. Ergonomic clamp with x10 or normal x1 attenuation. Code H0212 Available Regular price €12.00 -€1.00 Price €11.00
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0206 ✗ Out-of-Stock Price €34.90
Digital Multimeter Uni-T UT39A+ Modern compact digital multimeter with large LCD display provides and enhanced user experience. Voltage / current / resistance / capacitance analysis as well as diode, transistor and continuity testing. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0320 ✗ Out-of-Stock Price €23.90
Digital Multimeter M830BUZ Voltmeter Digital Multimeter M830BUZ Voltmeter features:- Uni-T M830BUZ Digital LCD Multimeter AC DC Voltmeter Ammeter- Maximum voltage between terminals and physical earth: 600V- Power supply: 9V battery- Protection: F 250mA / 250V- Display: LCD, range up to 1999 update: 2-3 / s- Method: double A / C slope- Indication of exceeding the range: on the screen only by the number "1"- Polarization of traffic for negative visualization "-"- Operating temperature: 0 ° C ~ 40 ° C (32 ° F ~ 104 ° F)- Storage temperature: -10 ° C ~ 50 ° C (10 ° F ~ 122 ° F)- Flat battery signal: the screen shows "BAT"- Dimensions: 125x70x25 mm.- Weight: 170 g.- Dedicated connections: CAT II 600 V Code H0041 ✗ Out-of-Stock Price €7.99
Digital Mini Handheld Sound Level Meter Uni-T UT353 UT353 mini digital sound level meters can convert ambient sound into electric signals, process data and display results on LCD. They can constantly monitor ambient sound. The main features are white backlight, clear LCD screen, adjustable sampling rate, fast/slow, 1/2 inch condenser microphone. Light weight, ergonomic design, user-friendly interface. Code H0192 Last items in stock Regular price €21.29 -€0.30 Price €20.99
Hantek 365A - Virtual Multimeter for PC and iPad, Datalogger and Recorder Virtual multimeter for PC, it replaces a conventional multimeter and also performs functions of autonomous datalogger and recorder. Characteristic: - Continuous measurement and recording of values of voltages, currents, resistances, capacity, etc., in real time and with creation of graphs and curves, - Electrical insulation, - Compatible with Windows 2000, Windows 7, Windows XP, Win8 / 10 - Plug & play connection via USB, - Simple and intuitive software. Measurements and tolerances: Code K0174 Last items in stock Price €98.90
non-contact voltage detector - Fazer 777 Test pen for non-contact voltage detection with buzzer. It can detect AC current up to 500V and DC current up to 60V. This detector complies with IEC61010 standards: pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation Code H0314 ✗ Out-of-Stock Price €7.89
Power supply 30V 5A Zhaoxin RXN-305D Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0156 ✗ Out-of-Stock Price €69.00
Digital Multimeter Uni-T UT39C Modern compact digital multimeter with large LCD display that provides a better user experience. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0203 ✗ Out-of-Stock Price €23.90
Wind meter with temperature measurement function Uni-T UT363S UT363S mini wind speed and temperature meters. UT363S measures wind speeds up to 30 m/s (108 km/h) with an accuracy of 0.01. The following units of measurement are available: m/s, km/h, ft/min, knots, mph. Code H0360 Last items in stock Price €49.49
Power socket tester with RCD test function Uni-T UT07B-EU The UT-07B-EU tester indicates the correct connection of L, N, PE cables in a socket. It also has a function to check the efficiency of residual current devices (RCD). The device is made of resistant plastic, which is very useful during installation work and ensures long-lasting correct operation. Attention! The RCD check is only possible if the phase is on the right-hand side. Code H0564 Available Price €14.95