Adjustable DC Module LM2596 1,25-32V 3A Step Down 3A DC Converter 1,25-32V Adjustable LM2596 Step Down Module features: - Based on the LM2596S-ADJ regulator - Rectification: Asynchronous - Output Voltage: 1.25v - 32v DC (adjustable) - Voltage of Input: 3.2v - 35v DC - Max Output Current: 3A (with heat sink) - Ripple at output voltage: 30mV - Frequency: 150KHz - Max Conversion Efficiency: 92% - Load Regulation: ± 0.5% - Voltage Regulation: ± 2.5% - Operating Temperature: -40ºC to + 85ºC - Measurements 43x 21x 14 mm Code A0004 Available Price €1.99
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit This touch HAT for Raspberry Pi will inspire your next interactive project with up to 12 capacitive touch sensors, from fruit keyboards to interactive lighting. Code PI012 Last items in stock Price €22.90
Water Flow Sensor 1-30l /Min YF-S201 The meter built on the basis of a water rotor and a Hall effect sensor Please note this is not a Accuracy. Pulse rate varies slightly depending on flow rate, fluid pressure, and sensor orientation. Water Flow Sensor 1-30l /Min YF-S201 features: - Working voltage range: DC 5 ~ 18 V - Allow pressure: water pressure below 1.75Mpa - Accuracy (flow-pulse output): ± 1 ~ 30 l / min - Use temperature: ‰ ¤ 80 ° C - Load capacity: ‰ ¤ 10 mA (5Vdc) - Operating humidity: 35% ~ 90% RH (frost free) - Temperature: -25 ~ + 80 ° C - Outlet diameter: 1/2 " - Red wire: positive supply - Wire Black: negative power supply - Yellow Cable: signal output - Color: black - Size: 6.2x3.6x3.4 cm Code M0109 ✗ Out-of-Stock Price €5.95
Cable 1x0.35 Flexible single-pole 0.35mm red 3m Characteristic: -Low-voltage electric cables -Standard: EN 50525-2-31 -Number of conductors: 1x0.35mm2 -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer diameter: 2.4mm Code K0033 Backorder Price €0.45
Breadboard Power Supply Protoboard 830/400 Points MB102 Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. Breadboard Power Supply Protoboard 830/400 Points MB102 features:- Input voltage supports up to 12V- Selectable 3.3V or 5V- USB input or standard DC 2.1 x5.5mm connector- Maximum current 700mA- It fits perfectly on the MB-102 breadboard feeding the two lateral buses- Weight: 15 gr. (approx.) Compatible only with MB-102 type plates Code A0003 Available Price €1.95
Nano V3.0 Terminal Block Adapter Nano V3.0 Terminal Block Adapter features: - Nano V3.0 Atmega328P adapter with soldered connectors - PCB dimensions: 53mm x 35mm Code B0024 Available Price €4.49
Flux Colophony Rosin Core 100g Flux Colophony Rosin Core 100g features:Flux rosin, solid resin, neutral ph for correct electronic welding.-Does not cause corrosion of non-ferrous metals-Does not cause short circuits-It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners-Cleans and prepares the surfaces and components to be welded, and facilitates the adherence and fluidity of the tin, improving welding in electronics worksUse a toothpick for the application. Do not apply in excess.SECURITY:-Use in ventilated spaces. Do not inhale vapors that are released when welding-Keep the pot tightly closed and out of reach of children-Do not eat. It is not toxic-Rarely irritating to skin contact Code Q0012 Last items in stock Regular price €5.89 -€0.50 Price €5.39
Power Supply Transformer 220V AC/DC 2A 5V Power Supply Transformer 220V AC/DC 2A 5V features:- Input voltage: 100~240V 50Hz- Output voltage: DC 5V- Output current: 2A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0102 Available Price €3.99
non-contact voltage detector - Fazer 777 Test pen for non-contact voltage detection with buzzer. It can detect AC current up to 500V and DC current up to 60V. This detector complies with IEC61010 standards: pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation Code H0314 ✗ Out-of-Stock Price €7.89
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0312 Last items in stock Regular price €23.90 -€1.50 Price €22.40
10-pieces network cable tool set - Crimper, tester,... Network tool set (10 pieces) for the construction of telephone and network cabling (RJ45, RJ11, RJ12) in a practical closed case. Crimper, tester, cable detector, cable stripper, screwdrivers, Rj-45 connectors, etc. Code H0319 Available Regular price €25.90 -€3.95 Price €21.95
Digital Multimeter Uni-T UT39A+ Modern compact digital multimeter with large LCD display provides and enhanced user experience. Voltage / current / resistance / capacitance analysis as well as diode, transistor and continuity testing. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0320 ✗ Out-of-Stock Price €23.90
Uni-T UTP1305 Laboratory Power Supply The UTP1300 series are single channel linear DC power supplies with low ripple / noise, overload protection and constant voltage / current characteristics. Maximum power: 300 W Adjustable voltage and current Code H0318 Last items in stock Price €129.00
Universal LCD Digital Multimeter 4 ½ digits UNI-T UT52 Black Modern digital multimeter with large 4 digits LCD display that provides a better user experience. Voltage / current / resistance / capacitance / frecunecy analysis, as well as diode, transistor and continuity tests. Max. display 19999 4 ½ digits This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0207 ✗ Out-of-Stock Price €59.00
Hantek 20:1 attenuator - suitable for passive signal attenuation of a 1008C HT201 20:1 oscilloscope 300V Max This attenuator allows the oscilloscope to measure the fuel injector and primary ignition waveforms. Passive attenuator with a 20:1 attenuation Therefore, if a 20V signal is introduced, it will emit a 1V signal. Using this element, the oscilloscope can measure voltage higher than its range (*20V) Code H0211 Available Price €10.99
Digital Mini Handheld Sound Level Meter Uni-T UT353 UT353 mini digital sound level meters can convert ambient sound into electric signals, process data and display results on LCD. They can constantly monitor ambient sound. The main features are white backlight, clear LCD screen, adjustable sampling rate, fast/slow, 1/2 inch condenser microphone. Light weight, ergonomic design, user-friendly interface. Code H0192 Last items in stock Regular price €21.29 -€0.30 Price €20.99
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0313 Last items in stock Regular price €34.50 -€4.55 Price €29.95
Desktop multimeter - laboratory meter UNI-T UT801 Digital benchtop multimeter for laboratories, to measure AC/DC current and voltage, resistance, capacitance, temperature, frequency, check continuity of circuits and diodes Code H0310 Last items in stock Regular price €108.90 -€15.00 Price €93.90
HanteK PP-150 / 5MHz-100MHz - Oscilloscope clamp test probe kit - 10:1 and 1:1 attenuation ratio Test probe for oscilloscope, kit with all the material as spare part or additional cable. Ergonomic clamp with x10 or normal x1 attenuation. Code H0212 Available Regular price €12.00 -€1.00 Price €11.00
Power Level KA2284 Indicator Module 5 LED The voltage / power / battery level indicator KA2284 contains five LED lights that light up progressively as the voltage increases, from green to red to yellow.It is ideal for your projects that require voltage level indicators, such as battery capacity and audio level indicators.The built-in potentiometer adjusts the range (sensitivity) of the LED display, and the DC or AC input can be selected via the P2 bridge.The AC and DC input can be controlled with bridge P2: bypassed for DC, open for AC.Adjustable power level through the potentiometer. Power Level KA2284 Indicator Module 5 LED features: - Operating voltage: 3.5 - 12 VDC- 5 level LED KA2284 controller- Adjustable power- 4 pin terminal: - IN: Input voltage to measure Code M0158 Available Regular price €3.59 -€0.90 Price €2.69
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0205 Last items in stock Regular price €31.99 -€2.00 Price €29.99
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0312 Last items in stock Regular price €23.90 -€1.50 Price €22.40
Digital non-contact laser tachometer RPM DT2234A Instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute) Code H0299 Last items in stock Price €12.49
Power supply 30V 5A UNI-T UTP3315TFL Stabilized power supply with adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5 A. The fan cools the power supply and can operate in constant mode. Power supply 30V 5A UNI-T UTP3315TFL features: - Input voltage: 230VAC - Output voltage: 0-30V adjustable - Output current: 0-5A adjustable - Backlit display - Protection against over-consumption and short circuit - Cooled by fan - Includes crocodile clip cables Uni-T UTP3315TFL datasheet Load Regulation Voltage & lt; = 0.01% + 3mV Current & lt; = 0.2% + 3mA Line Regulation Voltage & lt; = 0.01% + 3mV Current & lt; = 0.1% + 5mA Ripple and Noise Voltage 1mV rms Current 3mA rms Code H0181 Last items in stock Price €119.50
Hantek 20:1 attenuator - suitable for passive signal attenuation of a 1008C HT201 20:1 oscilloscope 300V Max This attenuator allows the oscilloscope to measure the fuel injector and primary ignition waveforms. Passive attenuator with a 20:1 attenuation Therefore, if a 20V signal is introduced, it will emit a 1V signal. Using this element, the oscilloscope can measure voltage higher than its range (*20V) Code H0211 Available Price €10.99
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0313 Last items in stock Regular price €34.50 -€4.55 Price €29.95
Digital Multimeter 890c + Ammeter Voltmeter AC DC Ohm C Buzzer Digital Multimeter 890c + Ammeter Voltmeter AC DC Ohm C Buzzer features: - Uni-T M890C + Digital Multimeter LCD AC DC Voltmeter Ammeter- Power supply: 9V battery- Protection: F 250mA / 250V- Display: LCD, range up to 1999 update: 2-3/s- Method: double A / C slope- Indication of exceeding the range: on the screen only by the number "1"- Polarization of traffic for negative visualization "-"- Operating temperature: 0 °C ~ 40 °C (32 °F ~ 104 °F)- Storage temperature: -10 °C ~ 50 °C (10 °F ~ 122 °F)- Flat battery signal: the screen shows "BAT"- Dimensions: 170x87x35 mm- Weight: 215g- Sound traffic: YES (piezo) Specifications: - DCV: 200m-2-20-200-1000V ± 0.5%- ACV: 2-20-200-750V ± 1.0% Code H0059 ✗ Out-of-Stock Price €20.90
Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ 8-channel oscilloscope for vehicle testing. More than 80 kinds of automotive diagnostic functions (ignition detection / sensor / bus detection / performance / starting and charging circuits , etc.). The video help function provides the diagnostic video help that can be viewed online. The diagnostic result can be generated a diagnostic report, printed or taken a screenshot by pressing a key, many methods to save the data. Supported for recording waveform for a long time. You can simulate the camshaft and crankshaft signal. Transmit signals through the USB 2.0 plug and play interface, and requires no additional power supply; Key Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ features: Code K0234 Available Price €117.90