Converter module AMS1117 Buck fixed output 5V 800mA This module is a voltage regulator that creates an output voltage of 5V with a maximum current of 800mA. The integrated regulator is referenced AMS1117. The module has two two point connectors for quick connection. Converter module AMS1117 Buck fixed output 5V 800mA features: - Based on the regulator AMS1117-5V - Input voltage: 4.5-12VDC - Output voltage: 5VDC (+/- 0.05V) - Max output current: 800mA - Operating temperature: -40C to + 150C - PCB size: 25x12 mm Code A0073 Available Price €1.49
L298N Motor Drive Controller Board Module Dual H Bridge DC with interruptor It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32.It incorporates a switch for the connection and disconnection of the entire module. L298N Motor Drive Controller Board Module Dual H Bridge DC with interruptor features: - Minimum operating voltage: 5 V- Maximum operating voltage: 35 V- Maximum current: ± 2 A- Logic voltage: 5V- PWM signal inputs for speed control- Outputs: for 2 DC motors or for a bipolar stepper motor- Measures: 43x43x24 mm Helpful Links: Operation of the robot by Infrared / Operation of the robot by Bluetooth /> Code M0183 Available Price €3.79
Hantek Oscilloscope UNI-T UTD2102CL+ 2 channel 100MHz UNI-T UTD2102CL+ Dual Channels Digital Storage Osciloscopio con 100MHz, 500MSa/s, 5000 wfms/s Code K0594 Last items in stock Regular price €295.00 -€16.00 Price €279.00
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0312 Last items in stock Regular price €23.90 -€1.50 Price €22.40
Digital Clamp Meters Uni-T UT202A+ The digital clamp meters are designed according to EN61010-2010 CAT II 600V/CAT III 300V, with overload protection, high reliability, high safety and high accuracy. These meters can be used to measure high voltage frequency, AC/DC current, etc. Code H0569 Last items in stock Price €34.95
Hantek Oscilloscope 6022BE USB 2 channel 20MHz Hantek Oscilloscope 6022BE USB 2 channel 20MHz features: - 20 MHz bandwidth - High performance: 48MSa / s sampling in real time - 23 measurement functions - The ability to perform mathematical operations: - Addition - add CH1 + CH1 - Subtraction - subtract CH1-CH2 or CH2-CH-1 - Multiplication - multiplication CH1 * CH2 - Division - division CH1: CH2 or CH2: CH1 - FFT analysis spectral analysis using a fast Fourier transform - The ability to save runs in the following formats: text files, jpg / bmp graphics files, Excel / MS Word files, CSV - Compatible with LabVIEW -USB 2.0 communication interface - powered from the USB port - Operating System: Windows8, Windows 7, Windows NT, Windows 2000, Windows XP, VISTA Code K0048 Last items in stock Price €72.59
Digital Car Multimeter LCD UNI-T UT107 Red UT100 series is specially designed for automobile diagnosis. Combines RPM, DWELL, and other multimeter functions. The series is useful for car maintenance personnel to diagnose traditional vehicles and hybrid electric vehicles. Applications: Its applications include working on fuses, switches, solenoids, relays, charging systems, fuel systems, engine detection, etc. Code H0209 Last items in stock Regular price €34.90 -€2.00 Price €32.90
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0313 Last items in stock Regular price €34.50 -€4.55 Price €29.95
Digital Multimeter UT890d+ Ammeter Voltmeter NCV True RMS Line wire test Digital Multimeter 890c + Ammeter Voltmeter AC DC Ohm C Buzzer features: - Uni-T M890C + Digital Multimeter LCD AC DC Voltmeter Ammeter- Power supply: 9V battery- Protection: F 250mA / 250V- Display: LCD, range up to 1999 update: 2-3/s- Method: double A / C slope- Indication of exceeding the range: on the screen only by the number "1"- Polarization of traffic for negative visualization "-"- Operating temperature: 0 °C ~ 40 °C (32 °F ~ 104 °F)- Storage temperature: -10 °C ~ 50 °C (10 °F ~ 122 °F)- Flat battery signal: the screen shows "BAT"- Dimensions: 170x87x35 mm- Weight: 215g- Sound traffic: YES (piezo) Specifications: - DCV: 200m-2-20-200-1000V ± 0.5%- ACV: 2-20-200-750V ± 1.0% Code H0332 ✗ Out-of-Stock Price €37.50
5 Digits Mechanical Pull Stroke Counter 5 Digits Mechanical Pull Stroke Counter features: Product Name: Pull Counter Model: D67-F Digit Display: 5 Range: 0-99999 Counting speed: 200 times / min Transmission ratio: 1:1 Zero return mode: Rotary External Material: Plastic, Metal; Color: Black Total Size: 8 x 4.7 x 3.2cm/ 3' x 1.9'' x 1.3'' (L*W*T) Installation size:38×30 mm Spring Size: 2.5 x 0.4cm/ 1'' x 0.16''(L*D) Net Weight: 77g Package Content: 1 x Pull Counter,1 x Spring Code K0223 Available Price €5.95
10-pieces network cable tool set - Crimper, tester,... Network tool set (10 pieces) for the construction of telephone and network cabling (RJ45, RJ11, RJ12) in a practical closed case. Crimper, tester, cable detector, cable stripper, screwdrivers, Rj-45 connectors, etc. Code H0319 Available Regular price €25.90 -€3.95 Price €21.95
Power Level KA2284 Indicator Module 5 LED The voltage / power / battery level indicator KA2284 contains five LED lights that light up progressively as the voltage increases, from green to red to yellow.It is ideal for your projects that require voltage level indicators, such as battery capacity and audio level indicators.The built-in potentiometer adjusts the range (sensitivity) of the LED display, and the DC or AC input can be selected via the P2 bridge.The AC and DC input can be controlled with bridge P2: bypassed for DC, open for AC.Adjustable power level through the potentiometer. Power Level KA2284 Indicator Module 5 LED features: - Operating voltage: 3.5 - 12 VDC- 5 level LED KA2284 controller- Adjustable power- 4 pin terminal: - IN: Input voltage to measure Code M0158 Available Regular price €3.59 -€0.90 Price €2.69
Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ 8-channel oscilloscope for vehicle testing. More than 80 kinds of automotive diagnostic functions (ignition detection / sensor / bus detection / performance / starting and charging circuits , etc.). The video help function provides the diagnostic video help that can be viewed online. The diagnostic result can be generated a diagnostic report, printed or taken a screenshot by pressing a key, many methods to save the data. Supported for recording waveform for a long time. You can simulate the camshaft and crankshaft signal. Transmit signals through the USB 2.0 plug and play interface, and requires no additional power supply; Key Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ features: Code K0234 Available Price €117.90
CMOS TTL logic tester With the logic signal state tester it is possible to detect 0, 1, high impedance states. The indication reading is displayed by means of LEDs. The supply voltage is 5-15V. Code K0556 Last items in stock Price €15.95
Cable Detector - Tracker 6812-R The device is designed to find and identify cables without disturbing the insulation. Finds broken wires, fault points and continuity test. Code H0311 Last items in stock Regular price €20.89 -€2.00 Price €18.89
Compact Digital non-contact laser tachometer RPM DT2234C+ Compact instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute) Code H0193 Available Regular price €16.49 -€2.00 Price €14.49
UNI-T UTG932E DDS Dual Channel Wave Function Generator Signal source. DDS UNI-T UTG932E 2-channel signal generator can generate sine wave, square wave, triangle wave, pulse wave and arbitrary wave, etc. The maximum output frequency of sine wave is 30MHz, sampling rate of 200 MSa/s. Code K0595 ✗ Out-of-Stock Regular price €169.00 -€20.00 Price €149.00
Hantek CC-650 BNC Clamp (650A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0241 Available Price €107.90
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0206 ✗ Out-of-Stock Price €34.90
Distance Meter UNI-T LM60 Simple laser distance meter with a range of 60 metres. The LM series laser distance meters are portable devices that can easily and accurately measure length, area and volume at the push of a button. Code H0309 Last items in stock Regular price €49.00 -€4.05 Price €44.95
Distance Meter UNI-T LM20m Super simple laser distance meter with a range of 20 metres and high accuracy. Functions: automatic switch-off single measurement laser pointer Code H0308 Last items in stock Regular price €23.00 -€3.00 Price €20.00
JDS6600 DDS Dual Channel Wave Function Generator Signal source. The JDS6600 series DDS signal generator can generate sine waves, square waves, triangle waves, pulse waves and arbitrary waves, etc. The frequency will be up to 15MHz. And it has duty cycle correction, amplitude modulation function and frequency sweep function etc. It can display output signal, amplitude and frequency at the same time. This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be applied in factories, schools, research institutes and laboratories. There are 5 models, JDS6600-60M, JDS6600-50M, JDS6600-40M, JDS6600-30M and JDS6600-15M. The main difference is the maximum sine wave output frequency. JDS6600 -15MHZ is the maximum output frequency of the sine wave. Code K0233 Last items in stock Price €109.50