Protoboard Breadboard 400 points for Arduino It can be used to work with AVR, ARM, PIC microcontrollers, Arduino modules and to work with self-designed prototypes. Arduino Protoboard Breadboard 400 points features: -400 Connections -Linkable with other Plates -Base with adhesive to attach it to the work surface -Measures 82x55x8 mm Code PB002 Available Price €1.90
L7805 Voltage Regulator 5V 1.5A TO-220 L7805CV Voltage Regulator 5V 1.5A TO-220 features:-Type Output: Fixed-Voltage Output: 5V-Manufacturer: ST Microelectronics-Output current: 1.5A-Max input voltage: 35V-Input input min.: 5V-Operational temperature: 0ºC to + 125ºC-Encapsulated: TO-220-Polarity: Positive Code T0022 Available Price €0.39
Cutting Pliers 130mm Cutting Pliers 130mm features: - This model is not isolated, please use it without current- Use to cut soft materials, electronic components, cables, plastic card- Can also be used for welding work Code H0051 Available Price €4.29
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car Ideal for projects with ARDUINO, Smart CarDetects transparent and translucent obstaclesE18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:- Current consumption: up to 100 mA- Supply voltage 5V- Current consumption <25mA- Response time of 2 ms- Measured distance: 3-80cm 15st angle- Screw to adjust the sensitivity, the back- Output status led indicator- Operating temperature: -25°C - + 55°C- Material: high-strength plastic- Type of output: normally open, NPN- Dimensions: 18 mm in diameter, Length 45 mm- Cable length 55cm- Departures: - Brown: + - Blue: - - Black: OUT Code S0004 Available Price €6.95
Ramps 1.4 Reprap - Arduino Mega Pololu Shield RepRap Arduino Mega Pololu Shield (RAMPS) version 1.4 for 3D printer. RAMPS is a shield for the Arduino Mega - The outputs of the Arduino board are redirected to the motor drivers. To have the complete electronics for a 3D printer you need a RAMPS, an Arduino Mega and at least four stepper motor drivers Code I0019 Available Price €4.95
M3 Nylon Separator set 120pcs 120x M3 Nylon Separator features: - Hexagonal M3 made of nylon for screws and fastenings on PCB boards, model aircraft, DIY projects - Can be used in prototyping and robotics projects - Box dimension: 128x 66x 24mm - Quantity: 120 units - Color: white Code H0049 ✗ Out-of-Stock Regular price €7.95 -€1.00 Price €6.95
Relay Module DC 5V 10A 2 Channel Low/High Trigger Relay Module DC 5V 10A 2 Channel Low/High Trigger features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- It has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL002 Available Price €3.15
Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features: - 3D Printer Extruder - 0.4mm Nozzle - 100k 3950 NTC thermistor with cable - MK8 heater block with 12v / 40W thermal ceramic resistance with cable - 1.75mm filament stud M6x30mm Code I0102 Available Price €5.49
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.59
Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0083 Available Regular price €7.95 -20% Price €6.36
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block. Code I0188 Available Regular price €13.49 -€2.00 Price €11.49
Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €8.95 -20% Price €7.16
Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Last items in stock Price €19.90
Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Heater cartridge size: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable - Heater size: 6 x 20mm Code I0087 Available Regular price €8.95 -€1.25 Price €7.70
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Available Regular price €8.90 -20% Price €7.12
Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.79
Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49
NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.10
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.59
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €24.90
Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Last items in stock Price €19.90
Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features: - 3D Printer Extruder - 0.4mm Nozzle - 100k 3950 NTC thermistor with cable - MK8 heater block with 12v / 40W thermal ceramic resistance with cable - 1.75mm filament stud M6x30mm Code I0102 Available Price €5.49
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block. Code I0188 Available Regular price €13.49 -€2.00 Price €11.49
Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €8.95 -20% Price €7.16
Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49
Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Last items in stock Price €26.90
Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0083 Available Regular price €7.95 -20% Price €6.36