USB Cable for Arduino Type A-B Price €1.49 Add to cart Self-leveling sensor BLtouch 3D printer Price €25.00 Add to cart Heated Bed PCB MK2B 3D Reprap Printer Price €8.50 Add to cart 3S BMS 25A 12.6V 18650 PCM PCB Circuit Charging Module. Price €4.49 Add to cart PLA Filamento 1.75mm 0.85kg Green color verde Price €17.49 Add to cart NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module... Price €5.29 Add to cart Motor Nema 23 28.5kg JK57HS112-4204 Price €67.90 Add to cart Nozzle Head 1.75 0.3 MK8 3D Printer Extruder Price €1.42 Add to cart 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90 Error in the product description. Report Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Heater cartridge size: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable - Heater size: 6 x 20mm 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90 €10.95 9,05 tax excl. Tax included €10.95 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options Recogida en Valencia: €0.00 GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €12.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €15.00 GLS 14:00 (España penínsular y Portugal): €10.99 GLS 24H (España penínsular y Portugal): €5.77 GLS 24-72H (Ceuta y Melilla): €30.00 GLS 24H (Portugal): €5.77 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €33.05 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €25.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Przesyłka paczkomatowa - standardowa: €9.35 Paczkomaty 24/7: €9.34 Paczkomaty 24/7: €11.99 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
Self-leveling sensor BLtouch 3D printer Price €25.00 Add to cart Heated Bed PCB MK2B 3D Reprap Printer Price €8.50 Add to cart 3S BMS 25A 12.6V 18650 PCM PCB Circuit Charging Module. Price €4.49 Add to cart PLA Filamento 1.75mm 0.85kg Green color verde Price €17.49 Add to cart NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module... Price €5.29 Add to cart Motor Nema 23 28.5kg JK57HS112-4204 Price €67.90 Add to cart Nozzle Head 1.75 0.3 MK8 3D Printer Extruder Price €1.42 Add to cart 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90 Error in the product description. Report Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Heater cartridge size: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable - Heater size: 6 x 20mm 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90 €10.95 9,05 tax excl. Tax included €10.95 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options Recogida en Valencia: €0.00 GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €12.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €15.00 GLS 14:00 (España penínsular y Portugal): €10.99 GLS 24H (España penínsular y Portugal): €5.77 GLS 24-72H (Ceuta y Melilla): €30.00 GLS 24H (Portugal): €5.77 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €33.05 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €25.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Przesyłka paczkomatowa - standardowa: €9.35 Paczkomaty 24/7: €9.34 Paczkomaty 24/7: €11.99 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
Heated Bed PCB MK2B 3D Reprap Printer Price €8.50 Add to cart 3S BMS 25A 12.6V 18650 PCM PCB Circuit Charging Module. Price €4.49 Add to cart PLA Filamento 1.75mm 0.85kg Green color verde Price €17.49 Add to cart NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module... Price €5.29 Add to cart Motor Nema 23 28.5kg JK57HS112-4204 Price €67.90 Add to cart Nozzle Head 1.75 0.3 MK8 3D Printer Extruder Price €1.42 Add to cart 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90 Error in the product description. Report Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Heater cartridge size: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable - Heater size: 6 x 20mm 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90
3S BMS 25A 12.6V 18650 PCM PCB Circuit Charging Module. Price €4.49 Add to cart PLA Filamento 1.75mm 0.85kg Green color verde Price €17.49 Add to cart NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module... Price €5.29 Add to cart Motor Nema 23 28.5kg JK57HS112-4204 Price €67.90 Add to cart Nozzle Head 1.75 0.3 MK8 3D Printer Extruder Price €1.42 Add to cart 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90 Error in the product description. Report
PLA Filamento 1.75mm 0.85kg Green color verde Price €17.49 Add to cart NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module... Price €5.29 Add to cart Motor Nema 23 28.5kg JK57HS112-4204 Price €67.90 Add to cart Nozzle Head 1.75 0.3 MK8 3D Printer Extruder Price €1.42 Add to cart 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90 Error in the product description. Report
NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module... Price €5.29 Add to cart Motor Nema 23 28.5kg JK57HS112-4204 Price €67.90 Add to cart Nozzle Head 1.75 0.3 MK8 3D Printer Extruder Price €1.42 Add to cart 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90
Motor Nema 23 28.5kg JK57HS112-4204 Price €67.90 Add to cart Nozzle Head 1.75 0.3 MK8 3D Printer Extruder Price €1.42 Add to cart 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90
Nozzle Head 1.75 0.3 MK8 3D Printer Extruder Price €1.42 Add to cart 10 other products in the same category Previous Next Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90 Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59 Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79 Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00 Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49 Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85 Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59 Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91 NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19 Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79
Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00
Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85
Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59
Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91
NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19
Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €27.90
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Backorder Regular price €9.49 -20% Price €7.59
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block. Code I0188 Backorder Price €16.79
Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Available Price €25.00
Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.85
Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €9.49 -20% Price €7.59
Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.91
NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.19
Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Available Price €29.90