Ceramic Heater Cartridge 12V 40W 3D Printer - Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable Characteristic: - Voltage 12V - Power 40W - Material: Ceramic y Stainless steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0050 Available Price €1.79
PTFE Teflon filament tube 3mm ID 4/6mm 1m PTFE Teflon filament tube 3mm ID 4/6mm 1m features: - Ideal for 3mm filament - Tube is cut in lengths from 1m to 10m - ID / OD 4mm / 6mm - For Reprap Prusa 3D Printer Code I0095 Available Price €2.89
DHT11 Temperature and Humidity Sensor The humidity sensor DHT11 comes in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement. DHT11 Temperature and Humidity Sensor features: - Operating voltage: 3 to 5 VDC- Humidity measurement range: 20-95% ± 5% accuracy- Temperature measurement range: 0ºC to 50ºC ± 2º accuracy- Maximum sampling rate: 2 seconds- Working current 2.5mA- Iterfaz 1-wire- Dimensions: 2.3 x1.2x 0.5cm- Quantity: 1 unit Code S0010 Available Price €2.49
Extruder Kit MK8 Aluminium 1.75mm Strand 3D Printer Reprap Prusa Extruder Kit MK8 Aluminium 1.75mm Strand 3D Printer Reprap Prusa features: - MK8 1.75mm filament extruder kit - Includes: * MK8 extruder complete push system * Square part dimensions: 40x40mm * Part dimensions - handle L: 44x28mm Code I0082 Last items in stock Price €5.95
Fan 12V 2x 3D Printer Cables Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 65mA - Speed: 3800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 11cm - Dimensions: 40mm x 40mm x 10mm Code I0026 Available Price €1.59
PC6-01 Pneumatic connector for PTFE tube quick coupler Bowden connector - a pneumatic connector with a 9.7mm screw and 1.75 cm length for the 6mm tube of 3D printer couplers for 1.75mm filament. Code I0071 Available Price €1.79
Kapton type 5mm thermal tape Characteristic: - Supports up to 280ºC - Electrical and antistatic insulation - Resistant to acid and alkaline products - Resistant to solvent - Adhesive - Approx Length: 26m - Polyamide adhesive tape 5mm x 26m - Known as Kapton polyamide tape - Product for welding works on those that need to protect some component from heat Code I0062 Available Price €1.59
W1209 12V DC Thermostat Digital Temperature Controller Switch W1209 12V DC Thermostat Digital Temperature Controller Switch features: - Model: W1209 - Supply voltage: DC 12V - Temperature control mode: ON / OFF - Temperature range: -50 -110 ° C - Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C - Measurement accuracy: 0.1 ° C - Refresh rate: 0.5 s - Temperature protection 0-110 ° C - Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA - Power of output: 10A relay - Sensor probe: NTC waterproof sensor (10K 0.5%) - Environmental requirements: -10 ~ 60 ° C Humidity 20% -85% - Dimensions: 48 x 40 mm Code M0102 Available Price €3.79
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Available Regular price €8.90 -20% Price €7.12
Ceramic Heater Cartridge 12V 40W 3D Printer - Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable Characteristic: - Voltage 12V - Power 40W - Material: Ceramic y Stainless steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0050 Available Price €1.79
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.59
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block. Code I0188 Available Regular price €13.49 -€2.00 Price €11.49
Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Last items in stock Price €26.90
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €24.90
Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Last items in stock Price €19.90
Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €8.95 -20% Price €7.16
Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features: - 3D Printer Extruder - 0.4mm Nozzle - 100k 3950 NTC thermistor with cable - MK8 heater block with 12v / 40W thermal ceramic resistance with cable - 1.75mm filament stud M6x30mm Code I0102 Available Price €5.49
Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.79
Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features: - 3D Printer Extruder - 0.4mm Nozzle - 100k 3950 NTC thermistor with cable - MK8 heater block with 12v / 40W thermal ceramic resistance with cable - 1.75mm filament stud M6x30mm Code I0102 Available Price €5.49
Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €8.95 -20% Price €7.16
Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Last items in stock Price €19.90
Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Last items in stock Price €26.90
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Available Regular price €8.90 -20% Price €7.12
Ceramic Heater Cartridge 12V 40W 3D Printer - Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable Characteristic: - Voltage 12V - Power 40W - Material: Ceramic y Stainless steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0050 Available Price €1.79
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €24.90
Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.59
Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Heater cartridge size: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable - Heater size: 6 x 20mm Code I0087 Available Regular price €8.95 -€1.25 Price €7.70