1x Female-Male Cables 20cm Jumper Dupont

Free metal wheel with white plastic support.
It allows a 360 ° rotation, wheel silently and without problems. Free metal wheel 360° with plastic support for robotics features:
- Main material: Polypropylene (PP), Steel.
- Main color: White, silver tone. - Dimensions of support: 50x24mm. - Ball diameter: 15.80mm.  

USB Cable for Arduino Type A-B features:
- Length: 50cm
- Color: Blue

Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.
DS18B20 Submersible Probe Sensor Temperature features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 °C to 125 °C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
      - Red Vcc
      - Yellow digital output
- Inocidable steel
- Cable length: 1m

It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features:
- Interface: I2C (logical level 3.3V)
- Resolution: 128 x 64
- Angle of view: & gt; 160 degree
- Screen color: blue
- Screen Dimension: 2.43cm / 0.96 "
- IC Controller: SSD1306
- Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70
- Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 "

10x Male-Male Cables 20cm Jumpers Dupont 2,54 features:
-Length: 20cm
-Quantity: 10 cables
-Connectors have male header contacts at either end
-Compatible with female connectors 2,54mm
-High quality and good working conditions
-Easy to install and use

Ideal to power your Arduino board through the power input.
5x 9v Battery Adapter Connector 6F22 with Cable features:

- Cable 15cm long
- Battery connector 9V, 6F22

- It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features:
- Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATmega328
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O Pins: 14
- Analog input pins: 6
- DC current per I / O Pin: 40 mA
- DC Current per Pin 3.3V: 50 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328
- SRAM 2 KB - Atmega328

Characteristic: -Length: 20cm
-Quantity: 40 cables
-Mono Dupont connectors on both ends
-Compatible with 2.54mm female connectors
-High quality and good working condition
-Easy to install and use