Easy PETG Filamento 1.75mm 0.85kg Gray color gris

9 way mounting solder sub-D male connector.
9-pin male sub-D connector for soldering in copper alloy features:

- Nominal voltage: 500 VAC
- Nominal current: 5 A
- Number of ways: 9
- The connectors are supplied with stamped and formed contacts
- Straight male connector
- Tin-plated and notched housings offering good grounding and continuity
- Tin-plated solder barrel terminations
- Good EMI / RFI protection
- Insulating material: fiberglass polyester

- Measurements:
Inner diameter d: 8mm
Outside diameter D: 22mm
Width - dimension B: 7mm
- Dimension C1: 1,5mm
- Dimension D1: 25mm
- Quantity: 1 unit

Connectors BLS01 Female/Female 1 Pin RoHS Single Row pack 20pcs features:
- Number of connections: 1 in a single row
- Type: female / female
- RoHS standard

Silicone Thermal Paste Syringe 25g features:
- Density at 20°C: 2.58 G/cm3
- Flashpoints: 350°C
- Freezing point: -50°C
- Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K
- Constant dielectric at 100 Hz: 4.7 (± 0.1)
- Cross resistance: 5 x 10 to the power 14 Ohm x cm
- Loss rate at f = 100 Hz: 0.020 (± 0.003)
- Range of operating temperature: -50~200°C

6mm Smooth Pulley GT2 Aluminium 20T features:
- Material: Aluminum alloy
- Outside diameter: 17.80mm
- Inside hole: 5mm
- Use with belt: 6mm Size is equal to 20T pulley only without tooth

The DHT11 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement.
Characteristic:
- Operating voltage: 3 to 5 VDC - Humidity measurement range: 20-95% ± 5% accuracy
- Temperature measurement range: 0ºC to 50ºC ± 2º accuracy
- Maximum sampling rate: 2 seconds - Working current 2.5mA
- 1-wire interface
- Dimensions: 32 x14 mm
- Quantity: 1 unit with 3x female / female cables

This type of spring nut is suitable only for type B trapezoidal screws with a pitch of 2 mm that give a complete revolution of 8 mm
Anti Backlash Spring Loaded Nut for Trapezoidal Screw L8 features:
- Material: brass and steel spring
- Complete revolution: 8 mm
- Diameter: 22 mm
- Length: 43 mm
- Each anti-rebound nut included large nut, spring and small nut

Ideal for projects with ARDUINO, Smart Car
Detects transparent and translucent obstacles
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:
- Current consumption: up to 100 mA
- Supply voltage 5V
- Current consumption <25mA
- Response time of 2 ms
- Measured distance: 3-80cm 15st angle
- Screw to adjust the sensitivity, the back
- Output status led indicator
- Operating temperature: -25°C - + 55°C
- Material: high-strength plastic
- Type of output: normally open, NPN
- Dimensions: 18 mm in diameter, Length 45 mm
- Cable length 55cm
- Departures:
      - Brown: +
      - Blue: -
      - Black: OUT