Fiberwood Filamento Madera 1.75mm 0.75kg color natural
  • Fiberwood Filamento Madera 1.75mm 0.75kg color natural
  • Fiberwood Filamento Madera 1.75mm 0.75kg color natural
  • Fiberwood Filamento Madera 1.75mm 0.75kg color natural
  • Fiberwood Filamento Madera 1.75mm 0.75kg color natural
  • Fiberwood Filamento Madera 1.75mm 0.75kg color natural
  • Fiberwood Filamento Madera 1.75mm 0.75kg color natural
  • Fiberwood Filamento Madera 1.75mm 0.75kg color natural
  • Fiberwood Filamento Madera 1.75mm 0.75kg color natural

Fiberwood Filamento Madera 1.75mm 0.75kg color natural

I0458

Premium Bobina para Impresora 3D

Fiberlogy
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Material similar a la madera que, gracias a su menor fragilidad, permite una mejor alimentación del filamento al extrusor. Las piezas resultantes se pueden mecanizar, pintar, barnizar y colorear, lo que le brinda aún más oportunidades para utilizar este filamento. La apariencia de la impresión permite su uso en estudios de arte y modelado.
Filamento enrollado en un carrete, envasado al vacío junto con un absorbente de humedad, colocado en una caja de cartón.
Consejos adicionales:
cuando se utilizan placas u otros medios para aumentar la adhesión, no es necesario calentar la cama.
para evitar una situación en la que la boquilla se obstruya con partículas de madera, recomendamos limpiar el extrusor después de cada impresión FiberWood utilizando cualquier tipo de filamento de PLA
diámetro de boquilla mínimo sugerido - 0.5 mm

-viene en muchas variantes de color

Variantes de color

Parámetros de impresión de filamentos sugeridos:

Temperatura de extrusión

200°C - 220°C

Temperatura de cama caliente

50°C - 70°C*

* Cuando se utilizan adhesivo u otros medios para aumentar la adhesión, no es necesario calentar la cama.
Debido a las diferencias de diseño de las impresoras, los datos anteriores deben tratarse como pautas y los valores apropiados deben determinarse experimentalmente.

Parámetros de filamentos:

Material fiberwood
Diámetro del filamento 1.75mm
Tolerancia ovalada +/-0.01mm
Tolerancia de diámetro +/-0.02mm
Superficie material brillo
Contracción del material muy bajo
Peso del producto 0.75 kg neto, bruto
Dimensiones de embalaje ~ 205 x 205 x 80 mm
Caja de cartón con estampado Envasado al vacío

Data sheet

Color
natural
Diametro [mm]
1.75
Material
Madera
Peso [g]
750

Customers who bought this product also bought

TB6600 4.5A Single Axis CNC Controller

The output current of this controller is infinitely adjustable to meet the various requirements of your application.
It has an automatic half-current function and a semi-automatic flow switch is also available, easy to use.
Its 6N137 high speed optical coupling ensures high speed without losing step printed on the rear panel subdividing the configuration instructions.
Its large heat sink allows good quality cooling.
The output is protected against short circuits. TB6600 4.5A Single Axis CNC Controller features:
  - Operating voltage DC 10V-45V
- Maximum nominal output: 4.5 A
- DC32V switching power is recommended
- 6N137 high speed optical coupling, ensure high speed without losing step

I0151

Regular price €14.90 -€1.00 Price €13.90

Protoboard Breadboard 400 points for Arduino

It can be used to work with AVR, ARM, PIC microcontrollers, Arduino modules and to work with self-designed prototypes. Arduino Protoboard Breadboard 400 points features:
-400 Connections
-Linkable with other Plates
-Base with adhesive to attach it to the work surface
-Measures 82x55x8 mm

PB002

Price €1.90

UNO WIFI Board CH340 compatible Arduino, NodeMCU, WeMos ESP8266

  - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields   Characteristic:   - ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: micro USB female 

B0070

Price €11.99

40x Female Male 10cm

40x Female Male 10cm features:
- Length: 10cm
- Quantity: 40 cables
- Compatible with 2.54mm male connectors
- High quality and good working conditions
- Easy to install and use

K0106

Price €1.99

DRV8825 + Radiator Stepstick Stepper Driver Motor Pololu 3D Printer

It has an automatic voltage regulator, which for practical purposes results in quieter operation and less vibrations.
Characteristic:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 45 V
- Maximum current: ± 2.5 A (24V, adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8 , 1/16, 1/32
- Factory soldered temples
- 4-layer PCB, 2 oz. Copper for improved heat dissipation
- Short-circuit and overtemperature protection - Use potentiometer to adjust the current
- Measurements: 20x16x12 mm

I0012

Price €3.49

40x Female-Female Cable 10cm

40x Female-Female Cable 10cm features:
- Length: 10cm
- Quantity: 40 cables
- Dupont female connectors on both ends
- Compatible with 2.54mm male connectors
- High quality and good working conditions
- Easy to install and use

K1005

Price €1.99
€37.80

31,24 tax excl.

Tax included 7
Pre-order
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €37.80

Order until 4pm we will send today
30 days return