PLA Impact Filamento 1.75mm 0.85kg Gray color gris
  • PLA Impact Filamento 1.75mm 0.85kg Gray color gris
  • PLA Impact Filamento 1.75mm 0.85kg Gray color gris

PLA Impact Filamento 1.75mm 0.85kg Gray color gris

I0463

Premium Bobina para Impresora 3D

Fiberlogy
Add to wish list

IMPACT PLA es un filamento técnico con mayor resistencia al impacto. Sus parámetros superan incluso al ABS. Mientras mantiene la facilidad y seguridad del proceso de impresión típico del PLA tradicional, IMPACT PLA es ideal para crear impresiones exigentes que trabajen en condiciones extremas, manteniendo el más alto nivel de atención al detalle.

- mayor resistencia al impacto en comparación con PLA (hasta 800%) y ABS (hasta 50%)
- parámetros que exceden el ABS
- reproducción precisa de detalles
- muy buena adherencia

Mira la video reseña del filamento:

Propiedades del filamento de PLA:

-fácil de imprimir a bajas temperaturas.
-baja contracción
-biodegradabilidad
-inodoro
-no es inflamable
-alta durabilidad,buena rigidez
-resistencia al agua completa

-viene en muchas variantes de color

Variantes de color

Parámetros de impresión de filamentos sugeridos:

Temperatura de extrusión

220°C - 245°C

Temperatura de cama caliente

50°C - 70°C*

*Cuando se utilizanadhesivo u otros medios para aumentar la adhesión, no es necesario calentar la cama.
Debido a las diferencias de diseño de las impresoras, los datos anteriores deben tratarse como pautas y los valores apropiados deben determinarse experimentalmente.

Parámetros de filamentos PLA:

Material PLA Impact
Diámetro del filamento 1.75mm
Tolerancia ovalada +/-0.01mm
Tolerancia de diámetro +/-0.02mm
Superficie material brillo
Contracción del material muy bajo
Peso del producto 0.85 kg neto, bruto
Dimensiones de embalaje ~ 205 x 205 x 80 mm
Caja de cartón con estampado Envasado al vacío

Datos técnicos:

Data sheet

Color
gris
Diametro [mm]
1.75
Material
PLA
Peso [g]
850

Customers who bought this product also bought

Heat Shrinkable Tube 5 Colors 3 Meters Package

Heat Shrinkable Tube 5 Colors 3 Meters Package features:
- Heat shrink tubing is used to connect electrical cables, isolate resistor and capacitor points, mark and protect cables Electrical, protect metal bars or tubes against corrosion and protect antennas.
- These heat shrink tubes are very flexible and of high quality. Made in EU
- Different sizes of 20 cm each are delivered:
* 1,6mm: black, brown, red, yellow, orange
* 2,4mm: black, brown , red, yellow, blue
* 3,2mm: black, brown, red, yellow, blue
- Quantity: 15 units
- Material: polyolefin
- Shrinkage ratio: 2: 1 (maximum reduce to 1/2 of its supplied diameter)
- Minimum shrinkage temperature: 115 ° C maximum 200 ° C

K0047

Price €1.95

Micro Bits for 3D Printer Nozzle pack 10pcs

Kit of Micro Steel Drill Bits to eliminate jams in nozzles of 3D printers, CNC
Characteristic:
- Diameter: 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0 / 1.2 mm
- Shank diameter approx . 3.2mm
- Total length approx. 38mm
- Material: Steel
- Quantity: 10 units

I0110

Price €4.99

Panasonic rechargeable battery NCR18650B 3400mAh Li-ion

Panasonic rechargeable battery NCR18650B 3400mAh Li-ion 3,6V features:
- Nominal capacity: 3350mAh (0.2C, 2.5V discharge)
- Minimum capacity: 3250mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: CC-CV (constant voltage with limited current )
- Charging current: standard charge: 1625mA,
- Charging time: standard charge: 4 hours,
- Max. Discharge current: 6500 mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.5V
- Cell weight: 47.5g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum
- Operating temperature: charge: 0 to 45 ° C, discharge: -20 to 60 ° C

PP025

Price €9.95

Sonoff DR - Sonoff DIN Rail Tray

Most Sonoff products are not DIN-rail mounted, making it difficult to place Sonoff products in the switchboard or control panel. With this simple tray you can place your switches inside the home's entrance box, for easy installation. 

WS029

Price €2.89

Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm

Tin ideal for application in consumer electronics circuits
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm features:
- 100gr. 0,5mm diameter welding wire. 60% tin and 40% lead
- Melting temperature 183 o C / 190 o C
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit
- High quality - manufactured in EU

Q0005

Price €8.95
€28.70
Save 20% €22.96

18,98 tax excl.

Tax included 1
Last 6 items
Regular price €28.70 Price €22.96

Order until 4pm we will send today
30 days return