USB Cable A to Micro USB B 150cm for Arduino Leonardo, Due USB Cable A to Micro USB B 150cm Arduino Leonardo, Due features: - Color:black- Length: 150cm Code K0205 Backorder Price €2.59
BD137 Plastic Medium-Power Silicon NPN Transistors pack 5ps BD137 Plastic Medium-Power Silicon NPN Transistors pack 5ps features: Material: Silicon Polarity: N-P-N Encapsulated: TO 126 Audio amplifier, driver VCBO collector-base voltage: 60V VCEO collector-emitter voltage: 60V VEBO emitter-base voltage: 5V Collector continuous current: 1.5A Typical gain of direct current. hfe: 40-160Maximum power dissipation: 12.5 Watt if T <= 25ºC Working frequency: 250 MHzTypical gain of direct current. hfe: 40-160 Code T0074 Available Price €0.99
Soldering Iron Holder Soldering Iron Holder features: - Comes supplied with a special replaceable sponge, for use in cleaning the tip- Suitable for use with most welders- Dimensions of base: 84 x 130 mm- Weight: 0.2kg Code H0095 Available Price €3.99
Heat Shrinkable Tube 5 Colors 3 Meters Package Heat Shrinkable Tube 5 Colors 3 Meters Package features: - Heat shrink tubing is used to connect electrical cables, isolate resistor and capacitor points, mark and protect cables Electrical, protect metal bars or tubes against corrosion and protect antennas. - These heat shrink tubes are very flexible and of high quality. Made in EU - Different sizes of 20 cm each are delivered: * 1,6mm: black, brown, red, yellow, orange * 2,4mm: black, brown , red, yellow, blue * 3,2mm: black, brown, red, yellow, blue - Quantity: 15 units - Material: polyolefin - Shrinkage ratio: 2: 1 (maximum reduce to 1/2 of its supplied diameter) - Minimum shrinkage temperature: 115 ° C maximum 200 ° C Code K0047 Available Price €1.95
16GB Class 10 MicroSD memory card with adapter 16GB Class 10 MicroSD memory card with adapter features: - Capacity 16GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0019 Backorder Price €4.95
RJ-45 Crimper The crimp clamp on the network terminals (RJ-45) and the two telephones (RJ-11,12 and RJ-9), is made entirely of metal and has a rubberized handle for convenience. It also has two blades integrated into the clamp that are used to strip and cut the cable to be assembled and a special hole to strip the round utp cables without any difficulty or preamble. In addition to all this, the crimp is horizontal, so it does not have some cables more pressed than others and, as if that were not enough, it knows that it will last a long time since all the products of this brand are of excellent quality. It is very easy to use, you don't need to be an expert to build your network cables. weight 0.4kg Code H0161 Available Regular price €14.90 -€1.00 Price €13.90
Arduino compatible Attiny85 Digispark board Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter. Similar to the Arduino line , It is one of the smallest boards on the market. Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others. You can use many of the same Arduino libraries and you have your own on the digispark wiki. Arduino compatible Attiny85 Digispark board features: - USB power supply - External power supply (7v-35v DC 12v maximum recommended) - 5V DC 500mA regulator on board - Programmable with the Arduino IDE - Loaded with Micronucleus bootloader Code B0002 Available Price €4.90
Power supply DC 24V 4.5A 100W Power supply DC 12V 8.3A 100W features: - Supply voltage: 110 / 230V AC - Output voltage: 12V DC - Output Amperage: 8.3A - Power at 12V: 100W - Dimensions: 129mm x 99mm x 40mm - With LED Strip Code A0127 Available Price €12.59
DC Circular Electromagnet 12V 20kgf 8W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 20 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0005 Available Price €16.89
Small Thrust Actuator, Solenoid - 24VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 24VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 24VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 2.6x2x6.35 cm / 1.02x0.79x2.5 " Code F0004 ✗ Out-of-Stock Price €7.95
Small Thrust Actuator, Solenoid - 12VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 12VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 12VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 3.7x2x2.5 cm / 1.5x0.8x1 " Code F0003 Available Price €7.95
Electric Door Lock 12V DC Electromagnetic Solenoid Easy to install for the electric door lock or other automatic door lock systems with the mounting board. Code M0218 Last items in stock Regular price €9.95 -€1.00 Price €8.95
DC Circular Electromagnet 12V 20kgf 8W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 20 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0005 Available Price €16.89
Small Thrust Actuator, Solenoid - 24VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 24VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 24VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 2.6x2x6.35 cm / 1.02x0.79x2.5 " Code F0004 ✗ Out-of-Stock Price €7.95
Small Thrust Actuator, Solenoid - 12VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 12VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 12VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 3.7x2x2.5 cm / 1.5x0.8x1 " Code F0003 Available Price €7.95
Electric Door Lock 12V DC Electromagnetic Solenoid Easy to install for the electric door lock or other automatic door lock systems with the mounting board. Code M0218 Last items in stock Regular price €9.95 -€1.00 Price €8.95