Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
Passive Buzzer 5V The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. 2x Passive Buzzer 5V features: - Input voltage: 3V to 12V - Diameter: 12mm - Height: 7.5mm - Pin spacing: 6.5mm - Impedance: 16 Ohm - Working frequency: 2 to 5 KHz - Quantity: 1 unit Code M0011 Available Price €0.39
SW-520D Vibration Metal Tilt Sensor Detects changes in the sensor angle and returns to the digital value. 5x SW-520D Vibration Metal Tilt Sensor features: - Contact resistance: Code S0020 Available Price €0.45
Resistor 10K Ohm 5% 0,25W 1/4W Resistor 10K Ohm 5% 0,25W 1/4W features:-10K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0021 Available Price €0.08
Resistor 1K Ohm 5% 0,25W 1/4W Resistor 1K Ohm 5% 0,25W 1/4W features:-1K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0013 Available Price €0.08
T8 R2 50cm Spindle Kit with Bearing Support, Nut and Coupler T8 R2 50cm Spindle Kit with Bearing Support, Nut and Coupler features: - With bearing bracket, nut, coupler for CNC 3D Printer - T8 spindle - Type: Trapezoidal screw * Diameter: 8mm * Tooth distance: 2mm * Lengths: 500 mm - Coupler 5mm / 8mm * Material: Aluminum alloy Code I0114 Available Price €18.95
Arduino Uno R3 Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog Code BAR66 Available Price €23.99
NEC IR Remote Control Infrared emitter HX1838 Arduino Raspberry Remote Control HX1838 Infrared Emitter NEC IR Remote Control Infrared emitter HX1838 features: - 21 keys - Measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with UNO module - Lighting a red 3mm LED by Infrared Realization of a manageable Infrared robot - Wiring the IR Distance remote control + Infrared IR Receiver VS1838 with the UNO module - Fix the IR Distance remote control + VS1838 Infrared IR Receiver in a Mini 2WD DIY Car Robot Kit Code W0020 Available Price €0.98
Small Thrust Actuator, Solenoid - 12VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 12VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 12VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 3.7x2x2.5 cm / 1.5x0.8x1 " Code F0003 Available Price €7.95
Small Thrust Actuator, Solenoid - 24VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 24VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 24VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 2.6x2x6.35 cm / 1.02x0.79x2.5 " Code F0004 ✗ Out-of-Stock Price €7.95
DC Circular Electromagnet 12V 2kgf 3W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 2 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0006 Available Price €8.49
Electric Door Lock 12V DC Electromagnetic Solenoid Easy to install for the electric door lock or other automatic door lock systems with the mounting board. Code M0218 Last items in stock Regular price €9.95 -€1.00 Price €8.95
Small Thrust Actuator, Solenoid - 12VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 12VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 12VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 3.7x2x2.5 cm / 1.5x0.8x1 " Code F0003 Available Price €7.95
Small Thrust Actuator, Solenoid - 24VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 24VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 24VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 2.6x2x6.35 cm / 1.02x0.79x2.5 " Code F0004 ✗ Out-of-Stock Price €7.95
DC Circular Electromagnet 12V 2kgf 3W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 2 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0006 Available Price €8.49
Electric Door Lock 12V DC Electromagnetic Solenoid Easy to install for the electric door lock or other automatic door lock systems with the mounting board. Code M0218 Last items in stock Regular price €9.95 -€1.00 Price €8.95