10x Photoresistor GL5528 LDR Photoresistor is a resistor whose resistance decreases with increasing intensity of lightthat affects her 10x Photoresistor GL5528 LDR features: - Model: GL5528- Spectral peak: 540nm- Maximum DC voltage: 150V- Maximum power: 100mW- Resistance with light (10lux): 10-20KΩ- Resistance with darkness (0lux): 1MΩ- Response time: 20ms- Operating temperature: -30ºC - 70ºC- 10k - 20k Arduino PiC 5mm- Quantity: 10 units Code S0050 Available Price €0.15
Resistor 100R Ohm 5% 0,25W 1/4W Resistors 100R Ohm 5% 0,25W 1/4W features:- 100R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0005 Available Price €0.08
Solar panel DIY 6V 1.1W 200mA Solar panel DIY 6V 1.1W 200mA features: - DIY Mobile Photovoltaic Charger - Working Voltage: 6V - Output Power: 1.1W - Working current: max. 200 mA - Product size: 112x 84x3 mm Code A0064 Available Price €5.90
Battery holder 2x AA Battery holder with switch Includes a switch to output the voltage built into the case itself. It has a cover to protect the batteries. The cover has perforation in case you want to secure it with a screw (not included). Battery holder 2x AA Battery holder with switch features: - Cable 15cm long - Measurements 68x 32x 18mm - Battery length max 50mm - Compatible batteries (LR06, R06, MN1500, AM3, UM3 , HP7) Code PP005 Available Price €1.39
Motor Support for Arduino Smart Car the robot car motor holder and assembly accessories Code R0050 Available Price €0.95
40x Male to male cables 20cm Characteristic: -Length: 20cm -Quantity: 40 cables -Mono Dupont connectors on both ends -Compatible with 2.54mm female connectors -High quality and good working condition -Easy to install and use Code K0006 Available Price €2.49
Solar Panel DIY 4V 30mA DIY mobile photovoltaic panel with working voltage of 4V and max. working current of 30mA. Code A0061 Available Price €2.49
Flux Gel Jeringa 1.4cm3 RMA Soldering BGA SMD SMT Flux gel syringe 1.4cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases). Code Q0018 Available Price €2.49
Solar panel controller 3.7V - 2A Lithium battery charge, discharge with light control 3.7V - 2A solar panel controller, charging, discharging lithium battery with lighting control with output from 2.5 V to 4.2 V. Integrate PWM suspension float. Characteristic: - Charging current: 2A - Compatible battery type: Li-ion - Type: 3.7V single cell lithium battery solar controller - PWM suspension float with integrated maintenance charge. - Avoid overcharging the lithium battery. - Battery type included: None - Charging voltage output limit: 4.2V - Low voltage drip charging of the battery: 2.5V - Over discharge voltage: 2.8V Order of use: 1 ) LED lights connected to "+ OUT", correspond to positive and negative. Code A0095 ✗ Out-of-Stock Price €10.89
12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell Suitable for a small solar power system, etc. 12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell features: - Working voltage: 12V - Output power: 1.5W - Product size: 115x 85x 3 mm Applications: - Charge cell phones - Home lighting - DIY solar powered toys Code A0070 Available Price €4.89
Solar panel DIY 6V 0.6W Solar panel DIY 6V 0.6W features: - Mobile DIY Solar System Photovoltaic Charger Cell - Working voltage: 6V - Output power: 0.6W - Working current: 0-200 mA - Product size: 90x60x3 mm - Includes soldered power cables. Code A0091 Available Price €2.89
Solar panel DIY 6V 1.1W 200mA Solar panel DIY 6V 1.1W 200mA features: - DIY Mobile Photovoltaic Charger - Working Voltage: 6V - Output Power: 1.1W - Working current: max. 200 mA - Product size: 112x 84x3 mm Code A0064 Available Price €5.90
Solar Panel 6V 5W Waveshare solar plate with the working voltage of 6V and output power of 5W and the maximum working current of 830 mA. The cell was placed in a rigid frame. Code WV001 Available Price €19.95
Solar Panel 6V 5W Waveshare solar panel with working voltage of 18V and output power of 10W and maximum working current of 570 mA. Includes polysilicon cells. The panel is placed in a rigid, high-strength frame. Code WV003 Available Price €25.95
Solar Power Management Module, for 6V~24V Solar Panel The solar power management module is designed for 6V~24V solar panel. It can charge Li 3.7V battery through solar panel or USB connection, and provides 5V/1A regulated output. Code WV002 Available Price €12.95
6V 4.5W DIY Solar Panel 6V 4.5W DIY Solar Panel features: - Mobile DIY System Photovoltaic Charger Cell -Work Voltage: 6V -Power output: 4.5W -Working current: 0-750mA -Product size: 165x165x3 mm Code A0063 Available Price €12.89
Solar Panel DIY 4V 30mA DIY mobile photovoltaic panel with working voltage of 4V and max. working current of 30mA. Code A0061 Available Price €2.49
Solar charger USB DC mobile power supply This USB mobile solar charger automatically identifies all smartphones. Its 5V - 2A output is constant. Restarting is automatic after the sun has been weaker. Compatible with most smartphones, tablets, ipad, digital cameras, etc ... Solar charger USB DC mobile power supply features: - Operating temperature: -40 ° C - 85 ° C - Input voltage: 3.6 - 20 VDC - Output voltage: 5 VDC - Output current: 2A - Conversion efficiency: 95% - Size: 30x25x117 mm Code A0075 Last items in stock Price €9.49
Solar panel controller 3.7V - 2A Lithium battery charge, discharge with light control 3.7V - 2A solar panel controller, charging, discharging lithium battery with lighting control with output from 2.5 V to 4.2 V. Integrate PWM suspension float. Characteristic: - Charging current: 2A - Compatible battery type: Li-ion - Type: 3.7V single cell lithium battery solar controller - PWM suspension float with integrated maintenance charge. - Avoid overcharging the lithium battery. - Battery type included: None - Charging voltage output limit: 4.2V - Low voltage drip charging of the battery: 2.5V - Over discharge voltage: 2.8V Order of use: 1 ) LED lights connected to "+ OUT", correspond to positive and negative. Code A0095 ✗ Out-of-Stock Price €10.89
12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell Suitable for a small solar power system, etc. 12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell features: - Working voltage: 12V - Output power: 1.5W - Product size: 115x 85x 3 mm Applications: - Charge cell phones - Home lighting - DIY solar powered toys Code A0070 Available Price €4.89
Solar panel DIY 6V 0.6W Solar panel DIY 6V 0.6W features: - Mobile DIY Solar System Photovoltaic Charger Cell - Working voltage: 6V - Output power: 0.6W - Working current: 0-200 mA - Product size: 90x60x3 mm - Includes soldered power cables. Code A0091 Available Price €2.89
Solar panel DIY 6V 1.1W 200mA Solar panel DIY 6V 1.1W 200mA features: - DIY Mobile Photovoltaic Charger - Working Voltage: 6V - Output Power: 1.1W - Working current: max. 200 mA - Product size: 112x 84x3 mm Code A0064 Available Price €5.90
Solar Panel 6V 5W Waveshare solar plate with the working voltage of 6V and output power of 5W and the maximum working current of 830 mA. The cell was placed in a rigid frame. Code WV001 Available Price €19.95
Solar Panel 6V 5W Waveshare solar panel with working voltage of 18V and output power of 10W and maximum working current of 570 mA. Includes polysilicon cells. The panel is placed in a rigid, high-strength frame. Code WV003 Available Price €25.95
Solar Power Management Module, for 6V~24V Solar Panel The solar power management module is designed for 6V~24V solar panel. It can charge Li 3.7V battery through solar panel or USB connection, and provides 5V/1A regulated output. Code WV002 Available Price €12.95
6V 4.5W DIY Solar Panel 6V 4.5W DIY Solar Panel features: - Mobile DIY System Photovoltaic Charger Cell -Work Voltage: 6V -Power output: 4.5W -Working current: 0-750mA -Product size: 165x165x3 mm Code A0063 Available Price €12.89
Solar Panel DIY 4V 30mA DIY mobile photovoltaic panel with working voltage of 4V and max. working current of 30mA. Code A0061 Available Price €2.49
Solar charger USB DC mobile power supply This USB mobile solar charger automatically identifies all smartphones. Its 5V - 2A output is constant. Restarting is automatic after the sun has been weaker. Compatible with most smartphones, tablets, ipad, digital cameras, etc ... Solar charger USB DC mobile power supply features: - Operating temperature: -40 ° C - 85 ° C - Input voltage: 3.6 - 20 VDC - Output voltage: 5 VDC - Output current: 2A - Conversion efficiency: 95% - Size: 30x25x117 mm Code A0075 Last items in stock Price €9.49