DHT11 Module Temperature and Humidity Sensor The DHT11 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement. Characteristic: - Operating voltage: 3 to 5 VDC - Humidity measurement range: 20-95% ± 5% accuracy - Temperature measurement range: 0ºC to 50ºC ± 2º accuracy - Maximum sampling rate: 2 seconds - Working current 2.5mA - 1-wire interface - Dimensions: 32 x14 mm - Quantity: 1 unit with 3x female / female cables Code S0001 Available Price €2.99
IR Remote Control + IR Infrared Receiver VS1838 IR Remote Control + IR Infrared Receiver VS1838 features: - The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage) - The CHQ1838 / HX1838 receiver receives the 38kHz signal - Vcc supply: 3.3V-5V - IN digital output to connect to the port Arduino I / O - Remote measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module - Light a 3mm red LED by Infrared Code W0021 Available Price €2.49
Passive Buzzer 5V The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. 2x Passive Buzzer 5V features: - Input voltage: 3V to 12V - Diameter: 12mm - Height: 7.5mm - Pin spacing: 6.5mm - Impedance: 16 Ohm - Working frequency: 2 to 5 KHz - Quantity: 1 unit Code M0011 Available Price €0.39
Grease TF silicone + PTFE 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Last items in stock Price €3.39
Micro Motor 3V 5V 6V DC DIY for Arduino UNO Mega Robotics For Arduino, Smart Car, Robotics.Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC DIY Arduino UNO Mega Robotics features: - Operating voltage: 1.5V to 6V- DC current: 350mA- Torque max.: 15g / cm- Max speed: 12000rpm- Weight: 16.5 g Code R0037 Available Price €0.98
Push button 6x6x4mm Push button 6x6x4mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x4.3mm Code K0079 Available Price €0.21
Digital Touch Sensor B21 The module is based on a touch sensitive IC capacitive touch switch module (TTP223B). In the normal state, the module produces Low power consumption. When a finger touches the corresponding position, the module output is high, if not touched for 12 seconds, it switches to low power mode. Digital Touch Sensor B21 features: - Low power consumption - Input voltage: 2 - 5.5VDC - Can replace the traditional touch of a button - Four M2 screws diameter 2.2 mm that position the holes for easy installation - 3-pin control interface: 1- GND 2- VCC 3- Control signal (output pin) - Power indicators: Bright green LED when the sensor is on Code M0130 Available Price €1.49
Rocker Switch KCD11 250V/3A On/Off SPST Rocker Switch 3A 250V On/Off SPST features: - AC 250V 3A 2 Pin ON/OFF I/O SPST Snap in mini oscillating switch- Rocker switch; Type: On/Off (SPST)- Control on and off SPST and 2 terminals- Voltage and Current: AC250V, 3A- Overall size: ~ 1.5 x 1 x 1.7 cm/0.6"x 0.4" x 0.7 "(L*W*H)- Mounting hole size: 1.35 x 0.8 cm/0.53"x 0.315" (L*W)- Black Code K0092 Available Price €0.95
Current and Voltage Meter Tester Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets.The voltage and current are shown successively.Current and Voltage Meter Tester features:- Operating range: - Voltage 3 - 7,5V - Current 0 -3A- Resolution: 10mV 1mA- Error: <± 1.5%%- Dimensions: 5.2 x 2 x 1.5 cm Code K0081 Available Price €2.89
Digital Voltmeter Green 0-200V DC 0.56 Digital Voltmeter Green 0-200V DC 0.56 features: - 3-wire recessed LED Voltmeter - No battery needed - Measurement range: 0-200 Vdc - Supply voltage: 4.5-30 Vdc - Screen: 0.56 € Green Led - Color: Black - Includes reverse polarity protection - Operating current: Code M0046 ✗ Out-of-Stock Regular price €2.79 -€0.50 Price €2.29
Voltmeter Amperemeter DC Red and Blue 100V 10A Voltmeter Amperemeter DC Red and Blue 100V 10A features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 10A (± 1%) - Min current resolution: 0.01A - Operating current: 5mA to 15mA - Display: Red LED color (Voltage) and Blue LED color (Intensity) - Includes reverse polarity protection - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: - 10ºC to 65ºC - No battery needed - Dual panel with voltmeter and digital ammeter Code M0068 Available Price €3.99
Shunt resistance DC 10A Amperimeter 75mV Shunt resistance DC 10A Amperimeter 75mV features: - Dimensions 12 x 2.5 x 1.8 cm Code M0165 Available Price €2.99
Shunt Resistor Ammeter DC 50A 75mV Shunt Resistor Ammeter DC 50A 75mV features: - Dimensiones 12x2.5x1.8 cm Code M0074 Available Price €2.99
Digital Voltmeter Blue 0V to 30V DC 0.56 LED The digital voltmeter has a measuring range of 0VDC to 30VDC ±%1 and an operating current of <30mA. Comes with blue LED display Code M0205 ✗ Out-of-Stock Regular price €2.49 -€0.50 Price €1.99
Digital Voltmeter Red 0V to 30V DC 0.56 Digital Voltmeter Red 0V to 30V DC 0.56 features: - Measurement range: 0-30 Vdc - Supply voltage: 4.5-30 Vdc - Screen: 0.56 € Red Led - Color: black - Includes reverse polarity protection - Operating current: Code M0065 ✗ Out-of-Stock Price €2.59
Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 features:- Measuring range: from 3.5 VDC to 30 VDC ±% 1- Operating current: <30mA- Measuring refresh time: 500ms- Dimensions: 54mm x24mm x15mm- Cable length: 85 mm- Color: Black- Display: Blue LED- Operating temperature: -10ºC to 65ºC Code M0038 ✗ Out-of-Stock Regular price €3.99 -€1.00 Price €2.99
Shunt resistance amperemeter DC 50A 60mV Dimensions 12 x 2.5 x 1.8 cm Code M0171 Available Price €3.95
Digital Voltmeter Green 0V to 30V DC 0.56 Digital Voltmeter Green 0V to 30V DC 0.56 features: - Measurement range: 0-30 Vdc - Supply voltage: 3.5-30 Vdc - Screen: 0.56 € Green Led - Color: black - Includes reverse polarity protection - Operating current: Code M0066 Available Price €2.79
Voltmeter Amperemeter DC Red and Blue 100V 10A Voltmeter Amperemeter DC Red and Blue 100V 10A features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 10A (± 1%) - Min current resolution: 0.01A - Operating current: 5mA to 15mA - Display: Red LED color (Voltage) and Blue LED color (Intensity) - Includes reverse polarity protection - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: - 10ºC to 65ºC - No battery needed - Dual panel with voltmeter and digital ammeter Code M0068 Available Price €3.99
Mini voltmeter with LED display 7 green segments 3 digits 3.5-30 VDC - 1% Mini voltmeter with LED display 7 green 3-digit segments.Simply connect the positive and the negative to turn it on and measure the voltage. Mini voltmeter with LED display 7 green segments 3 digits 3.5-30 VDC - 1% features: - Operating voltages (measurement): 3.5 - 30 VDC,- Color of the LED segments: green,- Update speed: approx. 500ms,- Accuracy of the measurement: ± 1%,- No need power supply: it is powered with the measured voltage,- Cable length included: 10cm,- Size: 30x12x9mm. Code M0185 Available Regular price €2.50 -€0.50 Price €2.00
Voltmeter LED Waterproof Digital Display DC Green 3.5V 30V DC 0.56 Voltmeter LED Waterproof Digital Display DC Green 3.5V 30V DC 0.56 features:- Measuring range: from 3.5 VDC to 30 VDC ±% 1- Operating current: <30mA- Measuring refresh time: 500ms- Dimensions: 54mm x24mm x15mm- Cable length: 85 mm- Color: Black- Display: Green LED- Operating temperature: -10ºC to 65ºC Code M0037 ✗ Out-of-Stock Regular price €3.99 -€1.00 Price €2.99
Digital Voltmeter Green 0V to 30V DC 0.56 Digital Voltmeter Green 0V to 30V DC 0.56 features: - Measurement range: 0-30 Vdc - Supply voltage: 3.5-30 Vdc - Screen: 0.56 € Green Led - Color: black - Includes reverse polarity protection - Operating current: Code M0066 Available Price €2.79
Shunt resistance DC 10A Amperimeter 75mV Shunt resistance DC 10A Amperimeter 75mV features: - Dimensions 12 x 2.5 x 1.8 cm Code M0165 Available Price €2.99
Shunt Resistor Ammeter DC 50A 75mV Shunt Resistor Ammeter DC 50A 75mV features: - Dimensiones 12x2.5x1.8 cm Code M0074 Available Price €2.99
Digital Voltmeter Blue 0V to 30V DC 0.56 LED The digital voltmeter has a measuring range of 0VDC to 30VDC ±%1 and an operating current of <30mA. Comes with blue LED display Code M0205 ✗ Out-of-Stock Regular price €2.49 -€0.50 Price €1.99
Voltmeter Ammeter 100V 50A Digital DC Red Blue Voltmeter Ammeter 100V 50A Digital DC Red Blue features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 50A (± 1%) - Min current resolution: 0.1A - Operating current: 5mA to 15mA - Display: Red LED color (Voltage) and Blue LED color (Intensity) - Includes reverse polarity protection - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: - 10ºC to 65ºC - No battery needed - Dual panel with voltmeter and digital ammeter Useful links for Arduino /> Code M0073 Available Price €6.89
Digital Voltmeter Red 0-200V DC 0.56 Digital Voltmeter Red 0-200V DC 0.56 features: - No battery needed - Measurement range: 0-200 Vdc - Supply voltage: 4.5-30 Vdc - Screen: 0.56 € Red Led - Color: Black - Includes reverse polarity protection - Operating current: Code M0047 Last items in stock Price €2.59
Voltmeter Ammeter Red Blue Digital DC 100V 50A + Shunt Voltmeter Ammeter 100V 50A Shunt Digital DC Red Blue features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 50A (± 1%) - Min current resolution: 0.1A - Operating current: 5mA to 15mA. - Screen: red LED color (Voltage) and blue LED color (Intensity) - Includes protection against reverse polarity - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: -10ºC to 65ºC Useful links for Arduino / Raspberry programming and projects with Arduino /> Code M0075 Available Price €8.99