Support for HC-SR04 Ultrasonic Sensor Support for ultrasounds, HC-SR04 distance meter. Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features: - Material: Acrylic - Color: transparent - Includes screws Code S0005 Available Regular price €1.45 -€0.50 Price €0.95
Shield Sensor Expansion Board Arduino compatible V2.0 Arduino Shield Sensor Expansion Board V2.0 features: The Mega Sensor Shield V2.0 allows: - To be directly punched to an Arduino Uno, Mega, Leonardo board - Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more - Size: 100x54x12 mm Code M0129 ✗ Out-of-Stock Regular price €3.89 -€0.90 Price €2.99
Photoresistor GL5516 LDR 10x Photoresistor 5mm GL5516 LDR 5-10k for Arduino.Photoresistor is a resistor whose resistance decreases when increasing the intensity of the light that falls on it. 10x Photoresistor GL5516 LDR features: - Model: GL5516- Spectral peak: 540nm- Maximum DC voltage: 150V- Maximum power: 90mW.- Resistance with light (10lux): 5-10KΩ- Resistance with darkness (0lux): 0.5MΩ- Response time: 20ms- Operating temperature: -30ºC - 70ºC Code S0012 Available Price €0.15
10x Male-Male Cables 20cm Jumpers Dupont 2,54 10x Male-Male Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have male header contacts at either end-Compatible with female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0007 Available Price €1.69
Portable Magnetizer and Demagnetizer for Screwdriver RC Accessory It can be used to demagnetize tools or parts that you do not want to magnetize. Especially for magnetizing screwdriver bits or almost anything else. No batteries or electricity required, portable and easy to use. Code H0196 Available Regular price €2.49 -€0.50 Price €1.99
DC-DC Boost Module 0.9~5V 600mA Converter Step Up Module Boost converter provides stable performance at 5V output even when operating with two AA batteries:- With a 1.5V AA battery-output 5V / 200 ~ 300mA- With two batteries 1.5V AA-output 5V / 500 ~ 600mAIt can be used for power applications and mobile devices to charge phones, cameras that use battery power.DC-DC Boost Module 0.9~5V 600mA Converter Step Up Module features:- Input Voltage: 1.5V - 5.0V DC- Output Voltage: 5V- Max Output Current: 600mA- LED operating indicator (input voltage min 2V)- Protection over short circuit: no- Measures of PCB 36 x 16 Code A0001 Available Price €1.85
Acrylic platform for Arduino UNO Acrylic panel for Arduino Uno with a very simple structure with rubber feet. After assembly with the 400 points breadboard, the assembly looks professional and elegant. Code PB030 Available Regular price €2.49 -€0.60 Price €1.89
LED matrix module 32x8 red MAX7219 SPI Voltage Sensor Module 0.02445V ~ 25V. When the module is powered by 5V the voltage detection does not exceed 25V, and when the module is powered with 3.3V the voltage detection does not exceed 16.5V. Arduino Compatible. Code M0192 Available Price €7.95
Servo Micro Digital Symmetry Left 1.5g 4.8V This left symmetry micro-digital servo is of excellent quality and very light. Its high speed and rotational capacity is great Advantage for developing sensitive projects with quick response. Characteristic: - Symmetry of the servo: for left incorporation - Plug: 1- red wire: positive polarity (+) 2- black wire: negative polarity (-) 3- white wire: control signal - Model: GS-1502 - Type: Analog Servo - Rotation angle: 180 ° - Torque: - 0.20kg / cm if Vin = 4.8V - 0.24kg / cm if Vin = 6V - Speed: - 0.11sec if Vin = 4.8V - 0.09sec if Vin = 6V - Operating voltage: 3.7V-5V - Material type: Nylon - PCB size: 21x15x12 mm Code F0001 Available Price €8.49
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €5.10
MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V High power digital servo, better precision than the MG995. MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V features: - Operating voltage: 4.8 V to 7.2 V- Consumption: 100mA- Torque max.: 12kg / cm (6V)- Operating speed: 0.22sec / 60degree (4.8V), 0.19sec/60degree (6V)- Max. Radio: 180ºC- Temperature range: 0-55 degrees- Weight: 55 g- Cable length: 29cm- Dimensions: 54 x38x 20 mm- Servo connector: JR (JR and Futaba adaptable) Code R0016 Available Regular price €8.95 -€1.00 Price €7.95
Servo Extension Lead Wire Cable 300mm JR Futaba Servo Extension Lead Wire Cable 300mm JR Futaba features:- Cable length: 300mm Code R0023 ✗ Out-of-Stock Price €1.75
Servo Extension Lead Wire Cable 150mm JR Futaba Servo Extension Lead Wire Cable 150mm JR Futaba features:- Cable length: 150mm Code R0025 ✗ Out-of-Stock Price €1.57
Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV features:- Platform for Arduino Robotics Modeling, works with servo 9g SG90- Servos not included Code R0022 Available Regular price €2.15 -€0.20 Price €1.95
Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features: - 25T Servo Arm for Futaba, Tower Pro and High Power Servos - Material: Aluminum - Color: red - Size: 35.5 x 15 x 6mm - Weight: 4 grams - M3 thread for joints of cars or helicopters. - Hole distance 20 and 24 mm from the servo outlet. - Quantity: 1 unit Code R0040 Available Price €1.59
Continous Rotation 360 Degree Servo S3003 Continous Rotation 360 Degree Servo S3003 features: - Operating voltage: 4.8 V to 6 V- Torque max.: 4.1kg / cm (6V)- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)- Radio max.: 360º- Temperature range: -20º + 60ºC degrees- Weight: 38 g- Cable length: 26cm- Dimensions: 40.5 x39x 20 mm- Servo connector: JR- Chinese manufacture Code R0019 Available Regular price €7.95 -€0.96 Price €6.99
Servo 9g SG92r 2.5kg 9g digital servo new version of SG90. POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque. It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features: Weight: 9g Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v) Gear type: POM with carbon fiber Operating speed: 0.1sec /60degree (4.8v) Temperature range: 0„ƒ_ 55„ƒ Dead band width:1us servo wire length: 25 cm Servo Plug: JR (Fits JR and Futaba) servo arms &screws included and fit with Futaba servo arm Code R0079 Available Price €4.30
Servo Micro Digital Symmetry Left 1.5g 4.8V This left symmetry micro-digital servo is of excellent quality and very light. Its high speed and rotational capacity is great Advantage for developing sensitive projects with quick response. Characteristic: - Symmetry of the servo: for left incorporation - Plug: 1- red wire: positive polarity (+) 2- black wire: negative polarity (-) 3- white wire: control signal - Model: GS-1502 - Type: Analog Servo - Rotation angle: 180 ° - Torque: - 0.20kg / cm if Vin = 4.8V - 0.24kg / cm if Vin = 6V - Speed: - 0.11sec if Vin = 4.8V - 0.09sec if Vin = 6V - Operating voltage: 3.7V-5V - Material type: Nylon - PCB size: 21x15x12 mm Code F0001 Available Price €8.49
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €5.10
MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V High power digital servo, better precision than the MG995. MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V features: - Operating voltage: 4.8 V to 7.2 V- Consumption: 100mA- Torque max.: 12kg / cm (6V)- Operating speed: 0.22sec / 60degree (4.8V), 0.19sec/60degree (6V)- Max. Radio: 180ºC- Temperature range: 0-55 degrees- Weight: 55 g- Cable length: 29cm- Dimensions: 54 x38x 20 mm- Servo connector: JR (JR and Futaba adaptable) Code R0016 Available Regular price €8.95 -€1.00 Price €7.95
Servo Extension Lead Wire Cable 300mm JR Futaba Servo Extension Lead Wire Cable 300mm JR Futaba features:- Cable length: 300mm Code R0023 ✗ Out-of-Stock Price €1.75
Servo Extension Lead Wire Cable 150mm JR Futaba Servo Extension Lead Wire Cable 150mm JR Futaba features:- Cable length: 150mm Code R0025 ✗ Out-of-Stock Price €1.57
Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV features:- Platform for Arduino Robotics Modeling, works with servo 9g SG90- Servos not included Code R0022 Available Regular price €2.15 -€0.20 Price €1.95
Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features: - 25T Servo Arm for Futaba, Tower Pro and High Power Servos - Material: Aluminum - Color: red - Size: 35.5 x 15 x 6mm - Weight: 4 grams - M3 thread for joints of cars or helicopters. - Hole distance 20 and 24 mm from the servo outlet. - Quantity: 1 unit Code R0040 Available Price €1.59
Continous Rotation 360 Degree Servo S3003 Continous Rotation 360 Degree Servo S3003 features: - Operating voltage: 4.8 V to 6 V- Torque max.: 4.1kg / cm (6V)- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)- Radio max.: 360º- Temperature range: -20º + 60ºC degrees- Weight: 38 g- Cable length: 26cm- Dimensions: 40.5 x39x 20 mm- Servo connector: JR- Chinese manufacture Code R0019 Available Regular price €7.95 -€0.96 Price €6.99
Servo 9g SG92r 2.5kg 9g digital servo new version of SG90. POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque. It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features: Weight: 9g Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v) Gear type: POM with carbon fiber Operating speed: 0.1sec /60degree (4.8v) Temperature range: 0„ƒ_ 55„ƒ Dead band width:1us servo wire length: 25 cm Servo Plug: JR (Fits JR and Futaba) servo arms &screws included and fit with Futaba servo arm Code R0079 Available Price €4.30