Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino 1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL001 Available Price €2.39
LED 1W UV SMD - Ultraviolet Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Voltage: 3.2-3.6V - Current : 700mA - Luminous flux: 5-8LM - Beam angle: 140 degrees - Colour emission: Ultraviolet Code P0162 Available Price €1.39
Heat Sink Aluminium Adhesive Radiator 25x25 Heatsink aluminium adhesive radiator for electronics components. Especially recomanded for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips etc. Good thermal conductivity, reduce the risk of hardware failure due to overheating, made of high quality Aluminum. Code A0117 Available Price €0.85
Battery holder 1x 18650 3.7V Power cable Characteristic: - Cable 15cm long - Measurements 74x21x 19mm - Weight: 8 gr. (approx.) - Stack length max 67mm Code PP014 Available Price €0.99
40x Female-Female Cable 10cm 40x Female-Female Cable 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont female connectors on both ends - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K1005 Available Price €1.99
Cable 1x0.75 Flexible single-pole 0.75mm black 1m Characteristic: -Conductor: flexible copper -Insulation: PVC -Low voltage electrical cables -Standard: EN 50525-2-31 -Number of conductors: 1x0.75mm2 -Resistance at 20ºC: 26.0 Ohm / Km -Weight (Kg / Km): 12 -Outside diameter: 2.7mm -Length 1m Code K0037 Available Price €0.49
AG Extreme thermal grease 3g syringe The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK. Code Q0087 Available Price €6.85
LED RGB 5050 WS2812B Black RGB LED SMD5050 WS2812B with black container IP20 waterproof level. They are smart that are used to create places with decorative lighting, lighting up screens located inside and outside facilities. They must be integrated to be managed with the help of any type of smart strip controllers, which can be: autonomous (offline), subordinate (online), light scattering (for create musical lights) and programmable (control). LED RGB 5050 WS2812B Black features: - Power supply: +3.7 - +5.3 VDC - Voltage Logic input: VDD-0.5~VDD + 0.5 - Operating temperature: -25 ° C - + 85 ° C - Storage temperature: -40 ° C - + 105 ° C - 4 pins: 1- VDD: LED power supply 2- DOUT: Control data signal output 3- GND: Ground connection Code P0095 Backorder Price €1.70
WS2812B Addressable 8x8 Flexible RGB LED Array Programmable LED module with flexible display, 64-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED. Code P0205 Available Price €10.95
LED Diode COB 3W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0027 ✗ Out-of-Stock Price €1.32
LED Diode COB 10W Orange SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.The advantages of LED COB:- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional lightMount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0034 Available Price €2.83
LED 1W Blue SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 20-30LM - Ã beam angle: 120 degrees - Color emission: blue Code P0047 Available Price €0.98
LED 1W Green SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 30mil chip - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 70-80LM - Ã beam angle: 120 degrees - Color emission: green Code P0046 Available Price €0.98
LED Power Diode COB 12W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes. Code P0030 ✗ Out-of-Stock Price €3.38
WS2812B Addressable 16x16 Flexible RGB LED Array Programmable LED module with flexible display, 256-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED. Code P0206 Available Price €17.95
LED strip Warm white 12V 3528 5m /300 Strip of 300 warm white coloured LED lights, 5 metres long. Code K0284 Available Price €10.95
Strip WS2812B 5m 30 LED /m white RGB RGB LEDs WS2812B WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually. WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. 30 individually indexable LEDs. 24-bit color control (8-PWM) -bit per channel) 16.8 million colors per LED One-wire communication Power: 5 V Width: 11 mm Thickness: 2.6 mm Length: 5 meters Consumption: 1.8A (all white) Waterproof With 3M adhesive Input and output terminals (data and power) Links https://learn.adafruit.com/adafruit-neopixel-uberguide/> Code P0106 Available Regular price €39.91 -€10.00 Price €29.91
High Power LED Chip Diode 10W Blue SMD COB COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light - Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little thermal silicone in each of the placement centers of the diodes- The thermal paste increases the thermal transfer between the diode and the metal plate used as circuit Code P0033 Available Price €2.83
Strip WS2812B 5m 30 LED /m white RGB RGB LEDs WS2812B WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually. WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. 30 individually indexable LEDs. 24-bit color control (8-PWM) -bit per channel) 16.8 million colors per LED One-wire communication Power: 5 V Width: 11 mm Thickness: 2.6 mm Length: 5 meters Consumption: 1.8A (all white) Waterproof With 3M adhesive Input and output terminals (data and power) Links https://learn.adafruit.com/adafruit-neopixel-uberguide/> Code P0106 Available Regular price €39.91 -€10.00 Price €29.91
LED strip Warm white 12V 3528 5m /300 Strip of 300 warm white coloured LED lights, 5 metres long. Code K0284 Available Price €10.95
LED Power Diode COB 15W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0031 Last items in stock Price €3.71
Aluminum Heat Sink 10x2.5cm Power LED 3W 5W The aluminium heatsink for 3W to 5W LEDs. It is 10cm long, 2.5cm wide, 1.0cm high. Code P0049 Available Price €3.49
LED 1W Blue SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 20-30LM - Ã beam angle: 120 degrees - Color emission: blue Code P0047 Available Price €0.98
LED 1W Orange SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip - Voltage: 2.2-2.4V - Current: 300mA - Luminous flux: 40-50LM - Ã Beam angle: 120 degrees - Color emission: yellow / orange Code P0045 Available Price €0.98
LED Diode COB 3W 3000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0144 Available Price €1.32
LED Diode COB 3W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0027 ✗ Out-of-Stock Price €1.32
LED RGB 5050 WS2812B White RGB LED SMD5050 WS2812B with white packaging, waterproof level IP20. They are smart that are used to create places with decorative lighting, lighting the information screens located inside and outside facilities. They must be integrated to be operated with the help of any type of smart strip controllers, which can be: autonomous (offline), subordinate (online), light scattering ( to create musical lights) and programmable (control). LED RGB 5050 WS2812B White features: - Power supply: +3.7 - +5.3 VDC - Logic input voltage: VDD-0.5~VDD + 0.5 - Operating temperature: -25 ° C - + 85 ° C - Storage temperature: -40 ° C - + 105 ° C - 4 pins: 1- VDD: LED power supply 2- DOUT: Control data signal output 3- GND: Ground connection Code P0095 Available Price €0.30