LED Power Diode COB 7W 6000K White SMD

Addressable 5050 RGB LED bar (5mm x 5mm) with low current draw. LEDs can be joined by connecting the output of one module to the input of another.
Data line with a very specific protocol, requires a real-time microcontroller AVR, Arduino, PIC, mbed, etc. A minimum 8 MHz processor is required.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

5x Power LED Aluminum Heat Sink 1W 3W features:
- Outside diameter: 36mm
- Height: 15mm
- Quantity: 5 units

Strip of 300 warm white coloured LED lights, 5 metres long.

Programmable LED module with flexible display, 256-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED.

This chain has DC5V LEDs that have built-in logic, so it is possible to vary the colour of each LED individually.

WS2811 includes a built-in integrated inside each LED, which allows access to each pixel individually. Black background

Easy programming with Arduino, ESP32, ESP8266, etc. 

RGB LEDs WS2812B
WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually.
WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable.
They are based on the 5050 LED. 30 individually indexable LEDs.
24-bit color control (8-PWM) -bit per channel)
16.8 million colors per LED
One-wire communication
Power: 5 V
Width: 11 mm
Thickness: 2.6 mm Length: 5 meters
Consumption: 1.8A (all white)
Waterproof
With 3M adhesive
Input and output terminals (data and power) Links
https://learn.adafruit.com/adafruit-neopixel-uberguide/>

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 2.2-2.4V
- Current: 300mA
- Luminous flux: 40-50LM
- Ã Beam angle: 120 degrees
- Color emission: yellow / orange

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.