LED Diode COB 3W 6000K White SMD

The aluminium heatsink for 3W to 5W LEDs. It is 10cm long, 2.5cm wide, 1.0cm high.

WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features:
- WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually
- WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable.
- They are based on the 5050 LED
- 24-bit color control (8-bit PWM per channel)
- 16.8 millions of colors per LED
- One-wire communication
- Power: max. 5 Vdc
- Current: 18.5mA
- Input and output terminals (data and power)

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

WS2812B are LEDs that have built-in logic, making it possible to vary the color of each LED individually.
WS2812B includes a integrated inside each LED, which allows each pixel to be accessed individually.
For this reason, these types of LEDs are called individually indexable.
They are based on the 5050 LED. 

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 2.2-2.4V
- Current: 300mA
- Luminous flux: 40-50LM
- Ã beam angle: 120 degrees
- Color emission: red

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil
- Voltage: 3.1-4.1V
- Current: 700mA
- Luminous flux: 39-55LM
- Ã beam angle: 120 degrees
- Color emission: blue

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 30mil chip
- Voltage: 3.0-3.2V
- Current: 300mA
- Luminous flux: 70-80LM
- Ã beam angle: 120 degrees
- Color emission: green

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.