High power 48W RGB LED diode

High power 50W LED suitable for KTV light, projection lamps.
Ideal for DIY projects.
DC 12V CPU heatsink for high power 50W LED diodes features:
- 35mm thick heat sink,
- DC 12V Ø95 x 25mm fan,
- 4 screws to fix the base carrying the LED diodes,
- Step between screws: 71.5mm,
- Includes thermal grease.

Power supply fixing to chassis with 2.4 mm central PIN.
Characteristic:
- Contact resistance 50 mOhm
- Insulation resistance 100 MOhm at 500 V DC
- Welding heat resistance 260ºC ± 5ºC ± 3 seconds
- Duration 5,000 cycles (25 x minute)
- Insulation dielectric strength 260 V ~ / 1 minute
- Material PBT 15% PV - UL94-V0
- Flammability UL94 V-0
- Fixed contact material, tin plated brass
- Flexible contact material, tin plated brass
- Central pin material, tin plated brass - Center contact diameter 2'4 mm - Quantity: 1.

ESP32-WROOM-32E (ESP32-DEVKITC-32E) is an evaluation board with ESP32 processor, 4MB FLASH, 802.11 a/b/g/n (Wi-Fi, WiFi, WLAN) and BlueTooth® Smart Ready 4.x dual-mode. It is much faster than the ESP8266 processor (NodeMCU and similar), and very easy to use.

High quality and very flexible heat shrink tubing. Available in different sizes (1.6mm, 2.4mm, 3.2mm, 4.8mm, 6.4mm, 9.5mm) in 5 colours each 10 cm long.

2x Protoboard Breadboard 5x7cm EGPC features:
-PCB dimension: 5x7cm
-Hole diameter: 1mm
-Pitch: 2.54mm
-Bakelite with copper fields

A virtual serial port to your PC through the USB port. FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable features:
- USB-Serial TTL 3.3V -5V Converter
- LED indicator for Tx, Rx, power supply
- Communication: Transceiver RX / TX TTL COM Virtual RS232
- Voltage: 3.3V or 5V - via jumper
- Pins: DTR, RX, TX, VCC, CTS, GND
- Protections: Electronic fuse up to 500mA
- Size: 35 x 17 mm Pitch 2,54mm
- Connection: Mini USB. Driver: W98 / W2000 / W2003 / W2008 / WinXP / WinVista / W7 / W8 / Linux / Mac
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
User manual for remote control + 4-channel receiver 315 MHz IC2262
- Wire the USB />

Set of M2, M3, M4 screws 330 pcs. Philips head screws, nuts and washers.

The WIZ850io is a compact sized network module (Ethernet module) for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the WIZNET Ethernet-based local network and internet with a TCP/IP interface. Compatible with libraries with the same Ethernet API. With this module with RJ-45 port you can build a web server. It can be used as a server or as a client.