Seeed Respeaker 6/Mic Circular Array Kit for Raspberry Pi With this small module, you can integrate your Raspberry with Amazon Alexa voice module or Google Assistant. It has never before been so easy. Get a chance to experience challenges of the newest technological developments in AI and smart home technologies. Code SS007 Backorder Price €59.99
Ethernet Patchcord UTP 5e 2m Ethernet Patchcord UTP 5e 2m features: Code K0273 Available Price €2.59
Black box with cooling fan and heatsinks for Raspberry Pi 4 model B All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Code RA092 Available Price €5.59
Arduino Kit Starter Oficial Arduino Starter Kit is a perfect kit to start your adventure with Arduino. It offers a range of original components, which ensure compatibility with all Arduino parts and give you access to full range of official materials. Additionally, you get a 15 projects booklet, which is pretty much all you need to start rolling with your Arduino projects Code KA002 Available Price €105.95
DRV8825 + Radiator Stepstick Stepper Driver Motor Pololu 3D Printer It has an automatic voltage regulator, which for practical purposes results in quieter operation and less vibrations. Characteristic: - Minimum operating voltage: 8 V - Maximum operating voltage: 45 V - Maximum current: ± 2.5 A (24V, adequately ventilated or refrigerated) - Logic voltage: 3 V / 5.5V - Microstep resolution: full, 1/2, 1/4, 1/8 , 1/16, 1/32 - Factory soldered temples - 4-layer PCB, 2 oz. Copper for improved heat dissipation - Short-circuit and overtemperature protection - Use potentiometer to adjust the current - Measurements: 20x16x12 mm Code I0012 Available Price €3.49
Module TCRT5000 Infrared Sensor IR Tracker Line Obstacle The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision. The ideal obstacle detection detector for the installation of smart robots. TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object. The working wavelength is 950nm. The transmitter is infrared LED and the phototransistor receiver. By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected). The sensor allows the detection of an object at a distance of up to 12 mm. Code S0025 Available Price €1.85
Battery holder 2x 18650 3,7V Parallel Lithium Battery Instruction: - The drawing of the polarities is not correct, it is wrong - Put the batteries in parallel Characteristic: - Cable 15cm long - Measures 74x42x 20mm - Weight: 10 gr. (Approx.) - Stack length max 67mm Code PP016 Available Price €1.85
Charger 2x18650 with EU Plug Cable Charger 2x18650 with EU Plug Cable features: - This product is very convenient and easy to use- Black- Material: metal and plastic- Weight: 74g- Input voltage: AC 100 -240 V 50/60 Hz- Compatible with: 18650 Li-ion- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status- Output: DC 4.2 V, 1A- Plug: EU plug- Cable length: 38cm- The battery are not included Code A0081 Available Price €4.59
16-bit I2C ADS1115 module, 4-channel ADC with professional gain amplifier PGA The ADS1115 is an external 16-bit ADC + a built-in programmable gain amplifier (or PGA), which can be very useful for certain Arduino and ESP8266 projects. This is ideal when more resolution or more analogue pins are required. You get better accuracy, as well as relieving the processor of this burden. Code M0226 Available Price €5.95
Arduino Pro PORTENTA H7 The Arduino Portenta H7 represents a new family of chips designed for IoT applications. The board uses the STM32H747 microcontroller equipped with Cortex-M7 and Cortex-M4 cores, which allows it to run programs written in Arduino®, MicroPython or JavaScript. In addition, the Arduino Portent H7 is characterised by high performance and at the same time energy efficiency. Code ABX42 Available Price €125.99
Sonoff LED strip amplifier and power adapter KZ1202000 RGB This LED power amplifier with a Sonoff power adapter is designed to extend existing Sonoff LED lighting systems. With this signal amplifier, you have the option to extend your Sonoff LED strip system, as the included power adapter provides sufficient power. Code WS011 Last items in stock Price €9.49
USB / micro USB cable 3A 1m white Cable USB / micro USB con soporte de carga de hasta 3A (máx.), perfecto para renovar la energía de dispositivos móviles como smartphones y tabletas. Code KH008 Available Price €2.49
Arduino Nano RP2040 Connect with headers Arduino Nano RP2040 Connect ABX00053 is the first Raspberry Pi SoC board. The smallest and most versatile plug&play board with dual core, connectivity, audio and machine learning capabilities. Code ABX053 Available Price €34.99
NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz features: - Standard: NFC Forum Type2 Tag Ntag215 - Protocol: ISO14443A - Memory: 540B (504B) EEPROM - Operating frequency: 13.56MHZ - Reading distance: 0-10CM - Communication speed: 106Kboud - Working temperature: -20ºC to 70ºC - Number of uses 100,000 times - Data retention: 10 years - Material: PVC - Dimensions 86 x 54 x 0.84 mm Code M0052 Available Price €1.99
NRF24L01 + Wireless Antenna Transceiver 2.4 GHz 1Km PA LNA - This module includes PA preamplifier and LNA (Low-noise amplifier)- Comes with the SMA antenna for 2.4GHz (2dB)- Outdoor - transmission up to 250kbps and a distance of up to 1 kilometer- Works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripherals control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Antenna Transceiver 2.4 GHz 1Km PA LNA features: * Based on chip NRF24L01 +* Free band: 2.4GHz ISM* Speed: 250kbps, 1Mbps, 2Mbps* Work current- Reception: 45 mA- Transmission: 115 mA (4.2uA -sleep mode)* Receiving sensitivity:-104dB 250kbps- 95dB 1Mbps- 92dB 2Mbps* SPI interface Code W0063 Last items in stock Price €6.95
Sensor TCRT5000 Infrared IR Tracker Line Obstacle Phototransistor Sensor TCRT5000 Infrared IR Tracker Line Obstacle Phototransistor features: - Operating range: 0.2mm to 15mm - Receiver: Phototransistor - Emitter: Infrared Led - Wavelength: 950 nm Code S0026 Available Price €0.50
Relay Module DC 5V 10A 2 Channel Low/High Trigger Relay Module DC 5V 10A 2 Channel Low/High Trigger features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- It has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL002 Available Price €3.15
Raspberry Pi Pico The first Raspberry microcontroller with the proprietary RP2040 chip and a dual-core Arm Cortex-M0+, the Foundation's cost-effective yet highly flexible solution. Designed for high performance and with a high degree of digital interfaces. Programming in C/ C++ and MicroPython. Code RA124 Available Price €4.99
Transparent green housing for Raspberry Pi 2, Pi3 Model B, B+ Transparent green housing for Raspberry Pi 2, Pi3 Model B, B+ features: - Case Case Shell Box - Housing for Raspberry Pi 2 and Pi 3, B and B + - Transparent green color - Dimension: 89x70x25mm Code RA026 Available Price €2.35
UNO Board CH340 micro USB clone - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields Characteristic: - Includes USB Cable- ATmega328P 16MHz chip with external quartz crystal- Microprocessor: ATMega328P- Operating voltage: 5V- Input voltage (recommended): 7-12V- Input voltage (limits): 6-20V- Clock speed: 16 MHz- Digital I / O pins: 14 (6 with PWM)- Analog input pins: 6- DC current for Pin I / O: 20 mA- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P- SRAM 2 KB - AtMega328P- EEPROM 1 KB - AtMega328P- Communication: micro USB female Type B Code B0053 Available Price €9.59
Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth ESP32 processor development board with WiFi and Bluetooth (BLE) compatible with Arduino Uno shields. It is much faster than the ESP8266 processor (NodeMCU and the like) . Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth features: Power: 5-12VDC WiFi 802.11 b / g / n / e / i (802.11n up to 150 Mbps) Bluetooth v4.2 BR / EDR and BLE. Compatible with Arduino Uno shields. 6 Analog input. 20 digital inputs / outputs (3.3V) (with PWM functions, interrupt). UART, SPI, I2C communication. Size: 68Ã — 53 mm Micro USB connection. 4Mbytes Flash Memory 520Kb Clock: 240Mhz (a core dedicated to WiFi processing) Temperature: -40C + 85C Current: 250mA (max) Current in saving mode: 0.15mA Operating current: 20mA (without WiFi) Useful links for Arduino / Raspberry programming and projects with Arduino / Code W0094 Available Price €9.95
Cable Ethernet Patchcord UTP 5e 1m The Ethernet Patchcord UTP 1m male A cable. Perfect for Raspberry Pi 2 and Pi 3, B and B+. ROHS certified Code RA031 Last items in stock Price €1.69
RGB full-color LED matrix panel 64x32 pixels RGB full-color LED matrix panel, 2.5mm Pitch, 64x32 pixels, adjustable brightness. At dusk, the dazzling neon lights of the streets and alleys illuminate the entire city, making it more dynamic. It's clear that the colour LED matrix panel plays an important role. Whether outside shops, on the bus or in a taxi, you can always see animations or advertising videos. Sounds great, why not give it a try? Provides open source development resources for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino. Code WV004 Available Price €29.99
4x4 High Quality Keyboard Matrix Push Buttons 16 Touch Keys High quality keyboard, with 16-key matrix.Ideal for your arduino projects, but can also be used with other microcontrollers. 4x4 High Quality Keyboard Matrix Push Buttons 16 Touch Keys features: - Momentary contact- Number of push buttons: 16- Dimensions: 39mm x 43mm Code M0009 Available Price €1.49
Sonoff LED strip amplifier and power adapter KZ1202000 RGB This LED power amplifier with a Sonoff power adapter is designed to extend existing Sonoff LED lighting systems. With this signal amplifier, you have the option to extend your Sonoff LED strip system, as the included power adapter provides sufficient power. Code WS011 Last items in stock Price €9.49
Wio Terminal - ATSAMD51 - RTL8720DN WiFi Bluetooth - Seeedstudio Wio Terminal: ATSAMD51 Core development board with Realtek RTL8720DN BLE 5.0 & Wi-Fi 2.4G / 5G. Arduino and MicroPython compatible, Wio Terminal is an ATSAMD51-based microcontroller with wireless connectivity compatible with Realtek RTL8720DN. Its CPU speed runs at 120MHz (Boost up to 200MHz). The Realtek RTL8720DN chip supports Bluetooth and Wi-Fi, providing the backbone for IoT projects. The Wio terminal itself is equipped with a 2.4 ”LCD screen, integrated IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared emitter (IR 940 nm). Code SS010 Last items in stock Price €55.49
Temperature Sensor Module MLX90614ESF-DCI GY-906 The GY-906DCI is a plate-mounted temperature sensor, based on an integrated 3 V infrared thermometer, single zone, medical precision, compensated gradient, within 15 cm the accuracy is high, approximately 0.5 degrees Code S0147 Available Price €39.90
5'' 800x480 TFT Raspberry Pi DSI Touchscreen for Raspberry Pi This is a 5" Raspberry Pi LCD touch screen with a resolution of 800*480 and a display area of 108×64.8mm. The product is compatible with Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points. Compatible with Raspberry Pi 3B/3B+/4B. Code RA158 Last items in stock Price €69.99