Liquid Flux Alcohol Base TK83 100ml Liquid Flux Alcohol Base TK83 100ml Flux liquid alcohol based for electronic welding. Type of flux: rosinNo Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC. Code Q0115 ✗ Out-of-Stock Price €4.95
40x Female Male 10cm 40x Female Male 10cm features: - Length: 10cm - Quantity: 40 cables - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K0106 Available Price €1.99
Portable Magnetizer and Demagnetizer for Screwdriver RC Accessory It can be used to demagnetize tools or parts that you do not want to magnetize. Especially for magnetizing screwdriver bits or almost anything else. No batteries or electricity required, portable and easy to use. Code H0196 Available Regular price €2.49 -€0.50 Price €1.99
Continous Rotation 360 Degree Servo S3003 Continous Rotation 360 Degree Servo S3003 features: - Operating voltage: 4.8 V to 6 V- Torque max.: 4.1kg / cm (6V)- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)- Radio max.: 360º- Temperature range: -20º + 60ºC degrees- Weight: 38 g- Cable length: 26cm- Dimensions: 40.5 x39x 20 mm- Servo connector: JR- Chinese manufacture Code R0019 Available Regular price €7.95 -€0.96 Price €6.99
Potentiometer B5K Linear 5K OHM kΩ Characteristic: - Tolerance: +/- 20% - Power: 0.125W Code K0066 Available Price €0.99
HC-SR501 Motion Detector Module Passive Infrared PIR Sensor Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º. An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone. Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features: - Infrared sensor with control circuit - Adjustable sensitivity and time - Operating voltage: 4.5V- 20V - Consumption in Idle state: Code S0003 Available Price €1.79
TP4056 Lithium Battery Charger Module 5V Micro USB TP4056 5V Micro USB Lithium Battery Charger Module features: - Based on TP4056ES regulator - Lipo micro USB Li-Ion charger - Input Voltage: 4.5V - 5.5 VDC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Indicator LED: charging red, charging green - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A - Measurements: 25x19x5 mm - Ideal for 18650 batteries Code A0100 Available Price €0.99
Reed Switch Module Magnetic Foil Sensor This Reed switch module uses a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch come together and the switch closes. When the magnetic field is removed the switch opens. The operating mode: - When exposed to a magnetic field the DO output is high - Power supply: 3.3-5V - Contact type: SPST-NO (normally open) - Use temperature: -20ºC to + 80ºC - Type Output: Digital (1 - 0) - PCB dimensions: 32 x 14 mm Code S0045 Available Price €1.39
Screwdriver set 6pcs magnetic Set of 6 screwdrivers made of chrome vanadium steel, with ergonomic handle and magnetic tip. The set consists of straight and cross head screwdrivers. Code H0577 Available Price €4.95
Portable Magnetizer and Demagnetizer for Screwdriver RC Accessory It can be used to demagnetize tools or parts that you do not want to magnetize. Especially for magnetizing screwdriver bits or almost anything else. No batteries or electricity required, portable and easy to use. Code H0196 Available Regular price €2.49 -€0.50 Price €1.99
Bits and socket set with ratchet 38 pcs. Do you want to have the right amount of essential tools for easy assembly and repair? Always be prepared for the job in hand. The 38-piece bit set from Rebel Tools is something every DIY enthusiast should have in their workshop. Each of the included accessories, i.e. the ratchet spanner, the magnetic adapter, the extension handle, the 9 socket spanners and the different types of bits will make your DIY work easier. Code H0583 Available Price €9.95
Ceramic alignment tool CD-20 The zirconium ceramic tip of the CD-200/201 combines the wear resistance of a metal tip with the non-conductive and non-inductive properties of the plastic.Ceramic alignment tool CD-20 features:- Length: 11.5 cm,- Screwdriver tip: flat,- Tip length: 2mm.- Suitable for: potentiometers, watchmaking, electronics components. Code H0150 Available Regular price €2.29 -€0.31 Price €1.98
8in1 ballpoint screwdriver - with straight and cross head The 8in1 Pen Screwdriver is a practical set containing 8 straight and Phillips screwdrivers for screwing and unscrewing various screws. The screwdriver is equipped with a detachable tip in which all the bits are stored. Code H0556 Available Regular price €3.49 -€1.00 Price €2.49
Precision screwdriver with 9 bits The precision pocket screwdriver is a useful accessory not only for DIY enthusiasts. It will give good results, for example, for changing batteries in electronic toys and other repairs. Its small size makes it easy to store in your handbag, and its pen shape with an additional clip allows you to attach the product to your shirt or trouser pocket to have it at hand in any situation. Code H0584 Available Price €2.95
Set of M2.5, M3 screws and nuts 180 pcs. Screw set M2.5, M3, 180 pieces. Philips head screws with nuts. Code VE023 Available Regular price €3.95 -€1.00 Price €2.95
2in1 mini Magnetic Screwdriver - double Phillips and flat tip - Multitool The mini magnetic screwdriver 2in1 is a double Phillips and flathead screwdriver. The 2in1 multitool is a practical tool for screwdriving and screw removal. The 2in1 screwdriver will come in handy for every DIY enthusiast, electronics technician and mechanic in the workshop when working. Code H0557 Available Price €1.79
Screwdriver set 18pcs Set of 18 screwdrivers made of chrome vanadium steel, with ergonomic handle. The set consists of 8 SL/PH screwdrivers and 10 SL/PH/Torx precision screwdrivers. Code H0575 Available Regular price €9.95 -€2.96 Price €6.99
Blue Flat Steel and Plastic Screwdriver Philips blue flat screwdriver made of steel and plastic suitable for screws with 2.0mm head for electronic applications. Code H0126 Available Price €0.49
Screwdriver set 6pcs magnetic Set of 6 screwdrivers made of chrome vanadium steel, with ergonomic handle and magnetic tip. The set consists of straight and cross head screwdrivers. Code H0577 Available Price €4.95
Portable Magnetizer and Demagnetizer for Screwdriver RC Accessory It can be used to demagnetize tools or parts that you do not want to magnetize. Especially for magnetizing screwdriver bits or almost anything else. No batteries or electricity required, portable and easy to use. Code H0196 Available Regular price €2.49 -€0.50 Price €1.99
Bits and socket set with ratchet 38 pcs. Do you want to have the right amount of essential tools for easy assembly and repair? Always be prepared for the job in hand. The 38-piece bit set from Rebel Tools is something every DIY enthusiast should have in their workshop. Each of the included accessories, i.e. the ratchet spanner, the magnetic adapter, the extension handle, the 9 socket spanners and the different types of bits will make your DIY work easier. Code H0583 Available Price €9.95
Ceramic alignment tool CD-20 The zirconium ceramic tip of the CD-200/201 combines the wear resistance of a metal tip with the non-conductive and non-inductive properties of the plastic.Ceramic alignment tool CD-20 features:- Length: 11.5 cm,- Screwdriver tip: flat,- Tip length: 2mm.- Suitable for: potentiometers, watchmaking, electronics components. Code H0150 Available Regular price €2.29 -€0.31 Price €1.98
8in1 ballpoint screwdriver - with straight and cross head The 8in1 Pen Screwdriver is a practical set containing 8 straight and Phillips screwdrivers for screwing and unscrewing various screws. The screwdriver is equipped with a detachable tip in which all the bits are stored. Code H0556 Available Regular price €3.49 -€1.00 Price €2.49
Precision screwdriver with 9 bits The precision pocket screwdriver is a useful accessory not only for DIY enthusiasts. It will give good results, for example, for changing batteries in electronic toys and other repairs. Its small size makes it easy to store in your handbag, and its pen shape with an additional clip allows you to attach the product to your shirt or trouser pocket to have it at hand in any situation. Code H0584 Available Price €2.95
Set of M2.5, M3 screws and nuts 180 pcs. Screw set M2.5, M3, 180 pieces. Philips head screws with nuts. Code VE023 Available Regular price €3.95 -€1.00 Price €2.95
2in1 mini Magnetic Screwdriver - double Phillips and flat tip - Multitool The mini magnetic screwdriver 2in1 is a double Phillips and flathead screwdriver. The 2in1 multitool is a practical tool for screwdriving and screw removal. The 2in1 screwdriver will come in handy for every DIY enthusiast, electronics technician and mechanic in the workshop when working. Code H0557 Available Price €1.79
Screwdriver set 18pcs Set of 18 screwdrivers made of chrome vanadium steel, with ergonomic handle. The set consists of 8 SL/PH screwdrivers and 10 SL/PH/Torx precision screwdrivers. Code H0575 Available Regular price €9.95 -€2.96 Price €6.99
Blue Flat Steel and Plastic Screwdriver Philips blue flat screwdriver made of steel and plastic suitable for screws with 2.0mm head for electronic applications. Code H0126 Available Price €0.49