16x2 1602 LCD display Blue IIC/I2C LCD display consists of a 16-character, 2-rows. The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 and many more controllers. Code P0010 Available Price €3.49
HC-SR04 Ultrasonic Sensor Distance Measuring Module It is very easy to make it work with an Arduino, PIC or any other microcontroller. In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle. HC-SR04 Ultrasonic Sensor Distance Measuring Module features: - Supply voltage: 5V (4.5V- 6V) - Consumption: 30 mA typical, (35 mA max) - Interface: VCC , GND, Signal - Range: 2 cm to 3 meters - Angle 15º - LED indicator of measurement in progress - Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm - Quantity: 1 unit Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry: Automatic robot operation with obstacle detection /> Code S0007 Available Price €1.79
3A DC Converter 4-53V Adjustable LM2596H Step Down Source Wide range of voltages, improved version. Drop module. They will use a multimeter to Check the output voltage and adjust the potentiometer. 3A DC Converter 4-53V Adjustable LM2596H Step Down Source features: - Based on the LM2596HVS-ADJ regulator - Rectification: Asynchronous - Output Voltage: 3v ~ 40v DC (adjustable) - Input Voltage: 4.5v - 53v DC - Max Output Current: 3A (with heat sink) - Ripple in output voltage: 30mV - Frequency: 150KHz - Max Conversion Efficiency: 92% - Load Regulation: ± 0.5% - Voltage Regulation: ± 2,5% - Operating temperature: -40ºC to + 85ºC - Measurements: 43x 21x 14 mm Code A0018 Available Price €2.79
Digital Microscope U500X USB 2.0 Magnification 500 Digital microscope with 500x zoom, 8 LED lights and support for microscope included.Discover the emotion of a completely new microscopic world, totally hidden from the naked eye.This USB digital microscope can magnify objects up to 500 times its original size and uses a dynamic image sensor and eight super bright white LED lights to create detailed images.Connect the microscope to your computer via USB and admire each image on your screen.You can see details like skin pores, individual cotton threads, milky clouds or amber inside THC crystals or even small scratches in a collectable coin that would be impossible to detect with the naked eye, can be easily seen with this amazing USB digital microscope. Code H0131 Available Regular price €19.90 -€1.90 Price €18.00
Screen OLED 0.96" 128x64 White SPI I2C 7 Pin Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption: 0.08W - Operating temperature: -20 to 70 ºC - PCB board dimension: 27 x 27mm - Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. - OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc. Code P0026 Available Regular price €5.00 -€1.50 Price €3.50
Pliers Front Cut 110mm Pliers Front Cut 110mm features: - This model is not isolated, please use it without current- The tool has an opening spring for greater comfort- Use to cut soft materials, electronic components, cables, wires, plastic card- Can also be used for welding work Code H0117 ✗ Out-of-Stock Price €4.55
ESP8266 WIFI Module ESP-01 for Electronic Sensor Robotics WIFI transceiver based on the ESP8266 controller. It has a microcontroller and 2 GPIO pins to be able to operate autonomously without the need for an external microcontroller. Characteristic: - Voltage of power: 3.3V - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and integrated power management units - Output power: 0.15 (W); + 19.5dBm in 802.11b mode - Consumption in low power mode: Code W0003 Available Price €1.95
Nano plate V3.0 CH340 + Arduino compatible pins It has an ATMega328P chip running at 16Mhz with a factory loaded bootloader Characteristic: - Microcontroller: ATmega328 - Operating Voltage (logic level): 5V - Input Voltage (recommended): 7-12V - Digital I / O Pins: 14 (6 PWM outputs) - Analog Inputs: 8 (A0-A7) - DC Current per Pin I / O 40 mA - Flash Memory: 32 KB (2 KB used by the bootloader) - SRAM: 2 KB - EEPROM: 1 KB - Clock Frequency: 16 MHz - USB Communication - CH340 - Dimensions: 18 mm x 44 mm Code B0026 Available Price €9.99
RJ-45 Crimper The crimp clamp on the network terminals (RJ-45) and the two telephones (RJ-11,12 and RJ-9), is made entirely of metal and has a rubberized handle for convenience. It also has two blades integrated into the clamp that are used to strip and cut the cable to be assembled and a special hole to strip the round utp cables without any difficulty or preamble. In addition to all this, the crimp is horizontal, so it does not have some cables more pressed than others and, as if that were not enough, it knows that it will last a long time since all the products of this brand are of excellent quality. It is very easy to use, you don't need to be an expert to build your network cables. weight 0.4kg Code H0161 Available Regular price €14.90 -€1.00 Price €13.90
10-pieces network cable tool set - Crimper, tester,... Network tool set (10 pieces) for the construction of telephone and network cabling (RJ45, RJ11, RJ12) in a practical closed case. Crimper, tester, cable detector, cable stripper, screwdrivers, Rj-45 connectors, etc. Code H0319 Available Regular price €25.90 -€3.95 Price €21.95
RJ-45 Crimper The crimp clamp on the network terminals (RJ-45) and the two telephones (RJ-11,12 and RJ-9), is made entirely of metal and has a rubberized handle for convenience. It also has two blades integrated into the clamp that are used to strip and cut the cable to be assembled and a special hole to strip the round utp cables without any difficulty or preamble. In addition to all this, the crimp is horizontal, so it does not have some cables more pressed than others and, as if that were not enough, it knows that it will last a long time since all the products of this brand are of excellent quality. It is very easy to use, you don't need to be an expert to build your network cables. weight 0.4kg Code H0161 Available Regular price €14.90 -€1.00 Price €13.90
10-pieces network cable tool set - Crimper, tester,... Network tool set (10 pieces) for the construction of telephone and network cabling (RJ45, RJ11, RJ12) in a practical closed case. Crimper, tester, cable detector, cable stripper, screwdrivers, Rj-45 connectors, etc. Code H0319 Available Regular price €25.90 -€3.95 Price €21.95