600W Boost Converter Booster Module DC voltage 12V to 80V
  • 600W Boost Converter Booster Module DC voltage 12V to 80V
  • 600W Boost Converter Booster Module DC voltage 12V to 80V

600W Boost Converter Booster Module DC voltage 12V to 80V

A0009

600W Boost Converter Booster Module DC voltage 12V to 80V features:
- Input voltage: 10V-60V
- Output voltage: 12-80V (adjustable)
- Output current: 10A
- Input current: 15A maximum
- Output power: 600W maximum
- Conversion efficiency: up to 95% (input 30V, output 40V 5A 93%)
- Wiring: solderless terminal
- The minimum difference between the output and input voltage: 2V
- The ambient temperature exceeds 40 ° C, increase the dissipation of heat
- Short circuit protection: If between reverse polarity protection: None
- Size: 85 x 63 x 64 mm
- Weight 275g
Applications:

OEM
5905323237902
Add to wish list

600W Boost Converter Booster Module DC voltage 12V to 80V features:

- Input voltage: 10V-60V
- Output voltage: 12-80V (adjustable)
- Output current: 10A
- Input current: 15A maximum
- Output power: 600W maximum
- Conversion efficiency: up to 95% (input 30V, output 40V 5A 93%)
- Wiring: solderless terminal
- The minimum difference between the output and input voltage: 2V
- The ambient temperature exceeds 40 ° C, increase the dissipation of heat
- Short circuit protection: If between reverse polarity protection: None
- Size: 85 x 63 x 64 mm
- Weight 275g
Applications:
- DIY adjustable vehicle power output, will only have access to 12V power input, output voltage can not be less than input voltage.
- Universal car laptop power supply.
- 12V input connector of your power supply, the output voltage adjusts to your laptop to work (90W computer, module temperature is approx. 45 ° C).

Note:

Conversion efficiency: 90-95%

12V input voltage: max. output power P = 12V * 10A = 120 W

input voltage 24V: max. output power P = 24V * 10A = 240 W

input voltage 60V: max. output power P = 60V * 10A = 600 W

Customers who bought this product also bought

TFT LCD Expansion Board Adapter 34pins V3.0 3.2" 4.3" 5.0" Shield Mega 2560

TFT LCD 34pins Expansion Board Adapter 3.2" 4.3" 5.0 Shield Mega 2560 features:
- Facilitates connections between the LCD TFT Touch 3V 2.4 ", 2.8", 3.2 "etc. with SD card reader and the Arduino Mega 2560 board
- Put the screen on the Shield and you can connect it directly to the Arduino Mega2560.
- TFT LCD MFT TFT LCD PCB adapter for Arduino Mega2560 STM32
- The TFT01 LCD operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top.
- The TFT LCD PCB adapter for Mega is compatible with the Arduino pins, the user can directly connect the TFT LCD PCB - Adapter on the shield and stand on the Arduino board. It can be used with a Mega2560 and LCD screen.

P0006

Price €6.53

3S BMS 25A 12.6V 18650 PCM PCB Circuit Charging Module.

In the case of a battery pack, the BMS (Battery Management System) balancing protection circuit allows charging and discharging to be individually controlled. That is, the circuit controls that all cells are charged and discharged at approximately the same voltage. The current during charging should be limited, because the cell will "absorb" the current given to it, but a higher current than the one established by the manufacturer (generally a safe current is 1C ) can cause the cell to overheat and, in extreme cases, explode. The same relationship also applies to discharge.

A0106

Price €3.71

Cable 1x0.35 Flexible single-pole 0.35mm red 3m

Characteristic:
-Low-voltage electric cables
-Standard: EN 50525-2-31
-Number of conductors: 1x0.35mm2
-Service voltage: 300 / 500V
-Service temperature: at 70ºC
-Resistance at 20ºC: 55.0 Ohm / Km
-Weight (Kg / Km): 7
-Outer diameter: 2.4mm

K0033

Price €0.37

Pulley GT2 16 Teeth 6mm Aluminium Pulley 3D Printer Reprap

Pulley GT2 16 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 16
- Pitch: 2mm
- Material: aluminum alloy
- Outside diameter: 13mm
- Inner hole: 5mm
- Use with strap: 6mm
- Quantity: 1 unit of 16 teeth GT2 pulley, 6mm wide and 2 studs
- Ideal for fix on the axis of the motors of your 3D printer

I0004

Regular price €1.61 -€0.50 Price €1.11

UNO Board CH340 clone

- It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields
Characteristic:
- ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: USB female Type B

B0011

Price €6.19

Motor Nema 17 42HS482504 2.5A

One of the most popular stepper motors with 200 steps per revolution and a maximum load of 5 kg/cm. It comes with a 30 cm cable. We have the best stepper motors at the best prices!

I0126

Price €12.31
€11.98
Save €1.50 €10.48

10,48 tax excl.

1
15 items
Regular price €11.98 Price €10.48

Order until 4pm we will send today
30 days return