Dupont Connector 2.54mm Male
  • Dupont Connector 2.54mm Male

Dupont Connector 2.54mm Male

K0111

Dupont Connector 2.54mm Male features:
- Connector for soldering or crimping
- Lot 100 units
- Ideal for your projects electronic, arduino, but can also be used with other microcontrollers

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Dupont Connector 2.54mm Male features:

- Connector for soldering or crimping
- Lot 100 units
- Ideal for your projects electronic, arduino, but can also be used with other microcontrollers

Customers who bought this product also bought

10x Female Strip 10 Long Pins

10x Female Strip 10 Long Pins features:
- Pin spacing: 2.54 mm
- Pin length: 10.5 mm
- Insertion position: Vertical
- Insertion: Through
- Quantity: 10 units of female strips of 10 pins each

K0086

Price €0.24

RFID Module with Card and Pendant

It is compatible with almost any microcontroller, Arduino, PIC, AVR.
It can be used in Access Control projects and Alarm projects. RFID Module with Card and Pendant features:
- Supports Quick CRYPTO1 and MIFARE
- Operating current: 13-26mA at 3.3V
- Standby current: 10-13mA to 3.3V
- Sleep-mode current: <80μA
- Maximum current: 30mA
- Frequency of operation: 13.56Mhz
- Reading distance: 0 to 60mm
- Communication protocol: SPI
- Maximum SPI speed: 10Mbit / s
- Maximum data rate: 10Mbit / s
- Operating temperature: -20 to 80ºC
- Humidity of operation: 5% -95%

M0015

Price €2.79

20x4 2004 LCD display PCF8574T I2C Backlit Blue

- It consists of a 20-character, 4-row display
- The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem
- Only two pins are needed for communication, SDA and SCL
- Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32
PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F
- It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2
20x4 2004 LCD display PCF8574T I2C Backlit Blue features:

- LCD screen, 20 characters and 4 lines
- 5V power supply
- HD44780 compatible controller

P0013

Price €8.49

AMS1117 Buck fixed output module 3.3V 800mA

AMS1117 Buck fixed output module 3.3V 800mA features:
- Based on AMS1117-3.3V regulator
- Input Voltage: 4.5 - 12Vdc
- Output Voltage: 3.3 Vdc (+/- 0,05V)
- Max.output current: 800mA
- Operating temperature: -40ºC to + 150ºC
- Dimensions: 25mm x 12mm

A0023

Price €1.49

Pulley GT2 20 Teeth 5mm Aluminium Pulley 3D Printer

Pulley GT2 20 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 20
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 18mm
- Inner hole: 5mm
- Use with strap: 6mm and 6.35mm
- Ideal to fix on the axis of the motors of your 3D printer

I0031

Price €1.79

Reed Switch Module Magnetic Foil Sensor

This Reed switch module uses a small device called a reed switch.
When the device is exposed to a magnetic field, the two ferrous materials inside the switch come together and the switch closes. When the magnetic field is removed the switch opens. The operating mode: - When exposed to a magnetic field the DO output is high
- Power supply: 3.3-5V
- Contact type: SPST-NO (normally open)
- Use temperature: -20ºC to + 80ºC
- Type Output: Digital (1 - 0)
- PCB dimensions: 32 x 14 mm

S0045

Price €1.39

JST Male Connector 15cm AWG18

This connector can be used in most modeling projects.
It is ideal for small Lipo and NiMH connection. JST Male Connector 15cm AWG18 features:
- Type: JST male connector for RC BEC Lipo
- Color:
- Black: low power polarity
- Red: high power polarity
- Length: 20cm

K0153

Price €1.09

TCRT5000 Module 3.5cm IR infrared sensor

The optical (reflective) module sensor with LM393 comparator, which detects obstacles with high accuracy. The ideal detector for obstacle detection for the installation of intelligent robots.TCRT5000: reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of an object using infrared reflection on the object. The transmitter is an infrared LED and the receiver is a phototransistor. The sensor allows the detection of an object at a distance of up to 3.5 cm from the white paper and 1 cm from the person's finger.

S0138

Price €1.69
€2.19

1,81 tax excl.

Tax included 1
Last 7 items
Price €2.19

Order until 4pm we will send today
30 days return