Monolithic Capacitor 100nF 50V 5mm - 104 X7R 10%
  • Monolithic Capacitor 100nF 50V 5mm - 104 X7R 10%

Monolithic Capacitor 100nF 50V 5mm - 104 X7R 10%

D0111

Monolithic type capacitor 100nF up to 50V, 5mm for mechanical soldered mounting and a tolerance of 10%. Check out our wide range of passive components.

Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Monolithic type capacitor 100nF up to 50V, 5mm for mechanical soldered mounting and a tolerance of 10%. Check out our wide range of passive components.

Features of Monolithic Capacitor 100nF 50V 5mm - 104 X7R 10%:

  • Capacitor capacitance: 100nF
  • Capacitor voltage: 50 V
  • Capacitor frame: 5 mm
  • Capacitor mechanical mounting: soldered
  • Differentiator: Rohs monolithic capacitor
  • Capacitor type: Monolithic
  • Capacitor tolerance: 10 % Capacitor tolerance: 10
  • Dielectric capacitor type: X7R
  • Electrical installation: THT
  • Operating temperature of the capacitor: 85 ° C

Customers who bought this product also bought

DC Step Down Converter 3.3V 2A 3.4-6V

DC Step Down Converter 3.3V 2A 3.4-6V features:
- Voltage drop module
- Input voltage: 3.4-6V
- Output voltage: 3.3V
- Current output: adjustable, max 2A
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 1.5MHz
- Efficiency conversion: up to 95%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 12 x 15 mm
- Full charge output ripple: Vpp <50 mV
- Output accuracy: ± 0.1V
- Current IQ without load: 0.2mA
- Stop current (EN) <10uA

A0068

Price €2.79

Buzzer 5V Active Buzzer 4 to 7V DC

Buzzer alarm to convert electrical to acoustic signals in robotics devices and Arduino projects.
Buzzer 5V Active Buzzer 4 to 7V DC features:

- Input voltage: 4V to 7V
- Diameter: 12mm
- Height: 9.5mm
- Spacing Pins: 7.6mm
- Maximum Current:

M0007

Price €0.37

2N2222 NPN 40V 800mA transistor pack 10pcs

Product Category: Bipolar Transistor, NPN.
2N2222 NPN 40V 800mA 300MHz transistor features:

- Package / Case: TO-92
- Quantity: 20 units
- Collector-base voltage VCBO: 75V
- Collector-emitter voltage VCEO: 40V
- VEBO emitter-base voltage: 6V
- Continuous collector current: 600mA
- DC MAX collector current: 800mA
- Maximum power dissipation: 1.6W

T0006

Price €0.07

5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat

The 28BYJ-48 has everything you need to start using stepper motors in your project
A stepper motor converts digital impulses into small steps of movement in one direction The engine also comes with a ULN2003 engine controller card
Can control two DC motors or a bipolar stepper motor with a maximum amperage of up to 500 mA
Equipped with state indicator LEDs A, B, C, D 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat features:
- Engine model: 28BYJ-48
- Phases engine: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per round: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm

R0038

Price €2.44

TCRT5000 IR Infrared Sensor Module

The optical module (reflective) sensor with CMOS Schmitt inverter 74HC14D, which detects obstacles with high precision. The ideal obstacle detection detector for the installation of smart robots. TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of an object using infrared reflection on the object. The working wavelength is 950nm. The transmitter is infrared LED and the phototransistor receiver.
The sensor allows the detection of an object at a distance of up to 15 mm. TCRT5000 IR Infrared Sensor Module features:
- The module has an output: digital
- CMOS Schmitt inverter 74HC14D
- Power supply: 5V - Range: 0.2 mm - 15 mm

S0048

Price €1.23

74LS86N DIP14 Quadruple 2-Input Positive-AND Gates

74LS86N DIP14 Input Logic NAND Gates O-Exclusive features:
- Blister: DIP14
- Number of pins: 14
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Input voltage VCC: 4.75 - 5.25 VDC
- High level input voltage V (IH): 2 VDC
- Low level input voltage V (IL): 0.8 VDC
- Input clamp voltage V (IK): -1.5 VDC
- High level output voltage V (OH): 2.4 - 3.4 VDC
- Low level output voltage V (OL): 0.2 - 0.4 VDC - High level output current I (OH): -800 μA
- Low level output current I (OL): 16 mA
- Input current to VCC: 1 mA
- High level input current I (IH): 40 μA
- Low level input current I (IL): -1.6 mA
- Short circuit output current I (OS): -55 - -18 mA

T0077

Price €0.91
€0.08

0,08 tax excl.

1
30+ items
Price €0.08

Order until 4pm we will send today
30 days return