Resistor 220 Ohm 5% 0,25W 1/4W Price €0.08 Add to cart 10x Photoresistor GL5539 LDR 50k - 100k Price €0.15 Add to cart Sodium Persulfate PCB Etchant pack 100g Price €3.69 Add to cart Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down Price €1.95 Add to cart Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh Price €1.69 Add to cart Female DC Power Connector Jack 2.1x5.5mm Price €0.49 Add to cart Flux Colophony Rosin Core 100g Price €5.89 Add to cart AMS1117 Buck fixed output module 3.3V 800mA Price €1.49 Add to cart 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79 Error in the product description. Report Welding Acid AG 35ml features:Prepared transparent liquid, acidic, corrosive.Prepares and facilitates welding on nickel-plated surfaces.Apply a small amount of the preparation on the element to be welded, and then wash it with water. CAUTION:Dangerous preparation, contains up to 35% phosphoric acid. In case of contact with skin or eyes, wash with plenty of water and consult a doctor. Keep closed and out of reach of children. It causes burns. Risk of serious eye damage. 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79 €2.69 2,22 tax excl. Tax included €2.69 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options Recogida en Valencia: €0.00 GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €12.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €15.00 GLS 14:00 (España penínsular y Portugal): €10.99 GLS 24H (España penínsular y Portugal): €5.77 GLS 24-72H (Ceuta y Melilla): €30.00 GLS 24H (Portugal): €5.77 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €33.05 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €25.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Przesyłka paczkomatowa - standardowa: €9.35 Paczkomaty 24/7: €9.34 Paczkomaty 24/7: €11.99 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
10x Photoresistor GL5539 LDR 50k - 100k Price €0.15 Add to cart Sodium Persulfate PCB Etchant pack 100g Price €3.69 Add to cart Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down Price €1.95 Add to cart Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh Price €1.69 Add to cart Female DC Power Connector Jack 2.1x5.5mm Price €0.49 Add to cart Flux Colophony Rosin Core 100g Price €5.89 Add to cart AMS1117 Buck fixed output module 3.3V 800mA Price €1.49 Add to cart 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79 Error in the product description. Report Welding Acid AG 35ml features:Prepared transparent liquid, acidic, corrosive.Prepares and facilitates welding on nickel-plated surfaces.Apply a small amount of the preparation on the element to be welded, and then wash it with water. CAUTION:Dangerous preparation, contains up to 35% phosphoric acid. In case of contact with skin or eyes, wash with plenty of water and consult a doctor. Keep closed and out of reach of children. It causes burns. Risk of serious eye damage. 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79 €2.69 2,22 tax excl. Tax included €2.69 Add to cart Available Order until 4pm we will send today Order until 4pm we will send today Delivery options Recogida en Valencia: €0.00 GLS 24-72H (Islas Canarias y Baleares): €19.99 GLS 24-72H (Portugal): €6.99 GLS EuroBusiness (FR): €12.00 GLS EuroBusiness (DE): €15.00 GLS EuroBusiness (UK): €15.00 GLS 14:00 (España penínsular y Portugal): €10.99 GLS 24H (España penínsular y Portugal): €5.77 GLS 24-72H (Ceuta y Melilla): €30.00 GLS 24H (Portugal): €5.77 GLS EuroBusiness (Andorra): €15.00 GLS 24-72H (Gibraltar): €19.99 GLS EuroBusiness (NL): €15.00 GLS EuroBusiness (IT): €15.00 GLS EuroBusiness (BE): €15.00 GLS EuroBusiness (AT): €15.00 GLS EuroBusiness (LX): €15.00 GLS EuroBusiness (MC): €15.00 GLS EuroBusiness (LI): €18.00 GLS EuroBusiness (CH): €18.00 GLS 24-72H (Portugal Islas): €33.05 GLS 72-120H (Greece): €29.99 GLS Internacional (Finland): €25.00 GLS Internacional (Austria): €15.00 GLS Internacional (Croatia and Ireland): €25.00 GLS International (Poland, Czech Republic, Slovenia): €30.00 Correos Express (entrega en 24H desde el envio): €5.78 Correos Express (entrega en 72H desde el envio): €4.95 Przesyłka kurierska - standardowa: €11.79 Przesyłka paczkomatowa - standardowa: €9.35 Paczkomaty 24/7: €9.34 Paczkomaty 24/7: €11.99 Paczkomaty InPost: €10.49 14 days return 14 days return installment from 7.45$ installment from 7.45$
Sodium Persulfate PCB Etchant pack 100g Price €3.69 Add to cart Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down Price €1.95 Add to cart Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh Price €1.69 Add to cart Female DC Power Connector Jack 2.1x5.5mm Price €0.49 Add to cart Flux Colophony Rosin Core 100g Price €5.89 Add to cart AMS1117 Buck fixed output module 3.3V 800mA Price €1.49 Add to cart 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79 Error in the product description. Report Welding Acid AG 35ml features:Prepared transparent liquid, acidic, corrosive.Prepares and facilitates welding on nickel-plated surfaces.Apply a small amount of the preparation on the element to be welded, and then wash it with water. CAUTION:Dangerous preparation, contains up to 35% phosphoric acid. In case of contact with skin or eyes, wash with plenty of water and consult a doctor. Keep closed and out of reach of children. It causes burns. Risk of serious eye damage. 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79
Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down Price €1.95 Add to cart Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh Price €1.69 Add to cart Female DC Power Connector Jack 2.1x5.5mm Price €0.49 Add to cart Flux Colophony Rosin Core 100g Price €5.89 Add to cart AMS1117 Buck fixed output module 3.3V 800mA Price €1.49 Add to cart 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79 Error in the product description. Report
Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh Price €1.69 Add to cart Female DC Power Connector Jack 2.1x5.5mm Price €0.49 Add to cart Flux Colophony Rosin Core 100g Price €5.89 Add to cart AMS1117 Buck fixed output module 3.3V 800mA Price €1.49 Add to cart 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79 Error in the product description. Report
Female DC Power Connector Jack 2.1x5.5mm Price €0.49 Add to cart Flux Colophony Rosin Core 100g Price €5.89 Add to cart AMS1117 Buck fixed output module 3.3V 800mA Price €1.49 Add to cart 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79
Flux Colophony Rosin Core 100g Price €5.89 Add to cart AMS1117 Buck fixed output module 3.3V 800mA Price €1.49 Add to cart 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79
AMS1117 Buck fixed output module 3.3V 800mA Price €1.49 Add to cart 10 other products in the same category Previous Next Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90 Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90 Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75 Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85 Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09 AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90 TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50 Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09 Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79 Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79
Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90
Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90
Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75
Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85
Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09
AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90
TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50
Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09
Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79
Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79
Water-Based Cleaner PCB Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 Available Price €5.90
Silicone compound 031 Double-component gel The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.After curing, it is very soft.Creates an excellent electrical insulation.It has a wide range of temperatures, from -55 ° C to 200 ° C. Silicone compound 031 Double-component gel features: - Mixing ratio: 3: 2,- Density: 0.98g / cm3,- Pre-crosslinking: 50-60 min,- Working temperature from -50ºC to + 180ºC,- Viscosity at 25ºC: 2000 cP,- Transparent color. Mode of use: - Clean, degrease and dry the system. Code Q0086 Backorder Price €9.90
Filling compound Epoxy resin 041 Bicomponent high quality Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. Code Q0119 Backorder Price €6.75
Isopropyl Alcohol 99.9% Purity IPA Canister 100mL Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales. Code Q0015 Available Price €3.85
Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09
AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds.Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive AG Silver thermal grease 3g syringe features: - Manufacturer: TermoPasty,- Thermal conductivity:> 3.8 W / mK,- Thermal impedance: <0.087 ° C in2 / W- Specific gravity:> 1.7g / cm3,- Evaporation: <0.001%,- Fluency: <0.05%,- Electrical conductivity:> 5.1,- Viscosity: does not flow,- Working temperature from -30ºC to + 300ºC,- Temperatures supported: -50ºC to + 340ºC,- Silver color. Mode of use: Code Q0089 Last items in stock Price €3.90
TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50
Silicone and Protective Grease with Teflon 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Available Price €2.09
Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum.Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Grease with molybdenum disulfide 100ml features: - Manufacturer: TermoPasty,- Release of fat oil at 100 ° C in 24 hours: 0.2%,- Delivery point: 196 ° C,- Penetration at 25 ° C after kneading: 294 mm / 10- Black color. Mode of use: - Store in a cool and well-ventilated place- Stay away from children.- Protect from sunlight and do not expose to temperatures above 50 ° C. Code Q0097 Last items in stock Price €3.79
Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 Last items in stock Price €4.79